SOURCES SOUGHT
25 -- 2 NSN LTC
- Notice Date
- 10/7/2024 6:20:56 AM
- Notice Type
- Sources Sought
- NAICS
- 336390
— Other Motor Vehicle Parts Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- CL24219001
- Response Due
- 10/15/2024 10:00:00 AM
- Archive Date
- 10/30/2024
- Point of Contact
- Scott D. Knowles, Phone: 6146920639
- E-Mail Address
-
scott.knowles@dla.mil
(scott.knowles@dla.mil)
- Description
- ***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10.� � � � � � � � � � � � � � � � � � � � � � NO SOLICITATION IS BEING ISSUED AT THIS TIME. � The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. �Please review the below NSNs and provide us with any additional sources that are able to manufacture these items. �Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information. �All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. �Phone 614 692-0639. We thank you in advance for your assistance. --------------------------------------------------------------�� ��� ��� ��� ��� � NSN 2530-01-420-5180 (ARM, STEERING) Approved Sources:� (34623) AM GENERAL P/N EC6004838B1 (63477) FEDERAL MOGUL P/N SE1579 NSN 2530-01-554-4728�� � (TIE ROD, STEERING) Approved Sources: (34623) AM GENERAL P/N 12507026 (63477) FEDERAL MOGUL P/N 12507026 ----------------------------------------------------------------- Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary. NO SOLICITATION IS BEING ISSUED AT THIS TIME Below are the current item descriptions, SEE SOLICITATION WHEN ISSUED FOR MOST CURRENT REQUIREMENTS. NSN 2530-01-420-5180 ARM, STEERING GEAR RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS � � �(MANUFACTURERS AND NON-MANUFACTURERS) ENHANCED CORROSION PROTECTION COATING REQUIRED CS120: NOTE: �THE CITED DRAWING IS A SOURCE CONTROLLED � � �DRAWING AND AS OF THE DATE OF THIS SOLICITATION � � �ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE � � �BEEN APPROVED. �EVEN THOUGH SOURCES AND APPROVED � � �PART NUMBERS ARE PROVIDED, THE ITEMS � � �FURNISHED MUST MEET THE REQUIREMENTS OF THE � � �CITED DRAWING. �OFFERORS WHO ARE INTERESTED IN � � �QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE � � �ACQUISITION MUST CONTACT THE COGNIZANT DESIGN � � �ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED � � �DRAWING. � � �ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES � � �THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT � � �THIS TIME. RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS � � �LISTS (QML). �THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A � � �SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR � � �QUALIFIED MANUFACTURERS LIST (QML). �QUALIFICATION REQUIREMENTS IN � � �PROCUREMENT NOTE H02 ""COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED � � �MANUFACTURERS LIST (QML)"" APPLY. RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN ZD080: SAMPLING: � � �THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ � � �H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE � � �SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, � � �STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR � � �AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF � � �VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED � � �ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE � � �SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER � � �MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR � � �PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT � � �SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT � � �UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. RQ032: EXPORT CONTROL OF TECHNICAL DATA � � �This item has technical data some or all of which is subject to � � �export-control of either the International Traffic in Arms regulations � � �(ITAR) or the Export Administration Regulations (EAR), and cannot be � � �exported without prior authorization from either the Department of State � � �or the Department of Commerce. Export includes disclosure of technical � � �data to foreign persons and nationals whether located in the United � � �States or abroad. This requirement applies equally to foreign national � � �employees and U.S. companies and their foreign subsidiaries. DFARS � � �252.225-7048 is applicable to this data. � � �The Defense Logistics Agency (DLA) limits distribution of export-control � � �technical data to DLA contractors that have an approved US/Canada Joint � � �Certification Program (JCP) certification, have completed the � � �Introduction to Proper Handling of DOD Export-Controlled Technical Data � � �Training and the DLA Export-Controlled Technical Data Questionnaire � � �(both are available at the web address given below), and have been � � �approved by the DLA controlling authority to access the � � �export-controlled data. Instructions for obtaining access to the � � �export-controlled data can be found at: � � �https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ � � �To be eligible for award, offerors and any sources of supply proposed � � �for use are required to have an approved JCP certification and have � � �been approved by the DLA controlling authority to access � � �export-controlled data managed by DLA. DLA will not delay award in � � �order for an offeror or its supplier to apply for and receive approval � � �by the DLA controlling authority to access the export-controlled data. RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) � � �for Manufacturers and Non-Manufacturers CRITICAL APPLICATION ITEM AM GENERAL LLC 34623 P/N EC6004838B1 FEDERAL MOGUL CORP SUB WAGNER 63477 P/N SE1579 IAW BASIC DRAWING NR 19207 12460468 REVISION NR A � DTD 09/26/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12469113 REVISION NR A � DTD 11/29/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460232 REVISION NR C � DTD 02/09/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12342929 REVISION NR G � DTD 08/06/2018 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 24617 E-2.121 REVISION NR � � DTD 10/01/1968 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12469120 REVISION NR A � DTD 11/29/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12339896 REVISION NR H � DTD 11/09/1999 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12469122 REVISION NR A � DTD 01/03/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12469282 REVISION NR � � DTD 08/15/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12460468 REVISION NR � � DTD 02/22/2022 PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1E QUP:001 �PRES MTHD:33 �CLNG/DRY:1 �PRESV MAT:19 WRAP MAT:GH �CUSH/DUNN MAT:JC �CUSH/DUNN THKNESS:C UNIT CONT:ZZ �OPI:M INTRMDTE CONT:ED �INTRMDTE CONT QTY:008 PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ARMY DETAILED PACKAGING REQUIREMENTS: Quantity per Unit Package: 001 Level of Packing: B Level of Preservation: Military Packing Code: A IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION, � � �PACKAGING, PACKING AND MARKING. ATTENTION: MILITARY PACKAGING TAKES PRECEDENCE. � � �. HAZARDOUS MATERIAL STATUS SHALL BE DETERMINED BY MANUFACTURER AND PROVIDED TO DLA LAND AND MARITIME PRIOR TO CONTRACT AWARD: � � �. IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS ------------------------------------------------------------------- NSN 2530-01-554-4728 TIE ROD, STEERING RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ032: EXPORT CONTROL OF TECHNICAL DATA � � �This item has technical data some or all of which is subject to � � �export-control of either the International Traffic in Arms regulations � � �(ITAR) or the Export Administration Regulations (EAR), and cannot be � � �exported without prior authorization from either the Department of State � � �or the Department of Commerce. Export includes disclosure of technical � � �data to foreign persons and nationals whether located in the United � � �States or abroad. This requirement applies equally to foreign national � � �employees and U.S. companies and their foreign subsidiaries. DFARS � � �252.225-7048 is applicable to this data. � � �The Defense Logistics Agency (DLA) limits distribution of export-control � � �technical data to DLA contractors that have an approved US/Canada Joint � � �Certification Program (JCP) certification, have completed the � � �Introduction to Proper Handling of DOD Export-Controlled Technical Data � � �Training and the DLA Export-Controlled Technical Data Questionnaire � � �(both are available at the web address given below), and have been � � �approved by the DLA controlling authority to access the � � �export-controlled data. Instructions for obtaining access to the � � �export-controlled data can be found at: � � �https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ � � �To be eligible for award, offerors and any sources of supply proposed � � �for use are required to have an approved JCP certification and have � � �been approved by the DLA controlling authority to access � � �export-controlled data managed by DLA. DLA will not delay award in � � �order for an offeror or its supplier to apply for and receive approval � � �by the DLA controlling authority to access the export-controlled data. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL � � �REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS � � �LISTS (QML). �THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A � � �SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR � � �QUALIFIED MANUFACTURERS LIST (QML). �QUALIFICATION REQUIREMENTS IN � � �PROCUREMENT NOTE H02 ""COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED � � �MANUFACTURERS LIST (QML)"" APPLY. ZD080: SAMPLING: � � �THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ � � �H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE � � �SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, � � �STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR � � �AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF � � �VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED � � �ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE � � �SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER � � �MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR � � �PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT � � �SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT � � �UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. RT001: MEASURING AND TEST EQUIPMENT ZD087: THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML � � �REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE � � �QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE � � �QPL(S)/QML(S). CS120: NOTE: �THE CITED DRAWING IS A SOURCE CONTROLLED � � �DRAWING AND AS OF THE DATE OF THIS SOLICITATION � � �ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE � � �BEEN APPROVED. �EVEN THOUGH SOURCES AND APPROVED � � �PART NUMBERS ARE PROVIDED, THE ITEMS � � �FURNISHED MUST MEET THE REQUIREMENTS OF THE � � �CITED DRAWING. �OFFERORS WHO ARE INTERESTED IN � � �QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE � � �ACQUISITION MUST CONTACT THE COGNIZANT DESIGN � � �ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED � � �DRAWING. � � �ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES � � �THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT � � �THIS TIME. CQC40: FAR 52.246-11, HIGHER LEVEL CONTRACT QUALITY � � �REQUIREMENTS, APPLIES/ISO 9001/ANSI/ASQC � � �Q 9001 APPLIES. CS147: ""THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH � � �MUST CONFORM TO SOURCE CONTROL DRAWING. BY � � �SUBMITTING AN OFFER, THE OFFEROR AGREES TO � � �PROVIDE SOURCE CONTROLLED COMPONENTS FROM � � �SOURCES APPROVED ON THE APPLICABLE SOURCE � � �CONTROL DRAWING."" CQ006: ""CONTRACTOR/MANUFACTURER IS REQUIRED TO � � �ESTABLISH AND MAINTAIN A CALIBRATION SYSTEM THAT � � �MEETS THE REQUIREMENTS OF ANSI/NCSL Z540-1-1994, � � �AMERICAN NATIONAL STANDARD FOR CALIBRATION - � � �CALIBRATION LABORATORIES AND MEASURING AND TEST � � �EQUIPMENT-GENERAL REQUIREMENTS, OR ISO 10012-1, � � �QUALITY ASSURANCE REQUIREMENTS FOR MEASURING � � �EQUIPMENT- PART 1, METROLOGICAL CONFIRMATION � � �SYSTEM FOR MEASURING EQUIPMENT."" 4 CFAT EXHIBITS ARE SUBJECT DO DISTRUCTION OR CONSUMPTION 2 CFAT EXHIBITS CAN BE USED AS PART OF THE MANUFACTURING STANDARDS. RS039: Shelf-life requirement RS001 for a TYPE I (CODE Y) item with a � � �shelf life of 180 months (non-extendable) applies to this item. CS187: CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE � � �USED NOR INCORPORATED IN ANY ITEMS TO BE � � �DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION � � �SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT � � �DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. � � �SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR � � �APPROVAL UNLESS THEY ARE AUTHORIZED BY THE � � �SPECIFICATION REQUIREMENTS. CRITICAL APPLICATION ITEM AM GENERAL LLC 34623 P/N 12507026 FEDERAL MOGUL CORP SUB WAGNER 63477 P/N 12507026 IAW BASIC DRAWING NR 19207 12507026 REVISION NR A � DTD 03/04/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12469117 REVISION NR B � DTD 11/29/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12469218 REVISION NR D � DTD 03/08/2021 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12507024 REVISION NR B � DTD 12/06/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12507029 REVISION NR � � DTD 05/13/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12469122 REVISION NR A � DTD 01/03/2007 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12469218 REVISION NR B � DTD 11/18/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12507025 REVISION NR B � DTD 12/06/2010 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12507027 REVISION NR � � DTD 05/14/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12507028 REVISION NR � � DTD 05/14/2008 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19207 12507026 REVISION NR � � DTD 09/30/2020 PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1E QUP:001 �PRES MTHD:31 �CLNG/DRY:1 �PRESV MAT:00 WRAP MAT:JL �CUSH/DUNN MAT:NA �CUSH/DUNN THKNESS:C UNIT CONT:E5 �OPI:M INTRMDTE CONT:E5 �INTRMDTE CONT QTY:004 PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ZZ -ADDITIONAL SPECIAL MARKING: EXPORT CONTROLLED ITEM. SPECIAL MARKINGS REQUIRED PER MIL-STD-129, PARAGRAPH 5.4.1.6 (Protected Cargo): The item description (nomenclature) shall be omitted from the MIL-STD-129 label for all shipping containers. 40 - omission of marking for sensitive, controlled or pilferable items per MIL-STD-129. 32 - SHELF LIFE TYPE 1, 180 MONTH NONEXTENDABLE IS REQUIRED OPEN THIS SIDE. IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS ________________________________________________________________
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/7267f17945604fb1adff79433b5bf882/view)
- Place of Performance
- Address: Columbus, OH 43218, USA
- Zip Code: 43218
- Country: USA
- Zip Code: 43218
- Record
- SN07235198-F 20241009/241007230109 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |