SOURCES SOUGHT
61 -- Platoon Power Generation (PPG)
- Notice Date
- 10/2/2024 5:06:30 AM
- Notice Type
- Sources Sought
- NAICS
- 335999
— All Other Miscellaneous Electrical Equipment and Component Manufacturing
- Contracting Office
- W6QK ACC-APG CONT CT WASH OFC ALEXANDRIA VA 22331-0700 USA
- ZIP Code
- 22331-0700
- Solicitation Number
- W909MY25R0001
- Response Due
- 11/18/2024 9:00:00 AM
- Archive Date
- 12/03/2024
- Point of Contact
- Kadi-Jah Sheridan, Jessica L. Wright
- E-Mail Address
-
kadi-jah.l.sheridan.civ@army.mil, Jessica.L.Wright106.civ@army.mil
(kadi-jah.l.sheridan.civ@army.mil, Jessica.L.Wright106.civ@army.mil)
- Description
- Disclaimer: This RFI does NOT constitute a Request for Proposal and is not to be construed as a commitment, implied or otherwise, by the Government that a procurement action will be issued. Response to this notice is not a request to be added to a bidders list or to receive a copy of a solicitation. No entitlement to payment of direct or indirect costs or charges by the Government will arise as a result of the submission of the requested information. No reimbursement will be made for any costs associated with providing information in response to this announcement and any follow up information requests. Responses to this RFI may be considered in the future determination of an appropriate acquisition strategy for the program. The Government may not respond to any specific questions or comments submitted in response to this RFI or information provided as a result of this request. Responses shall not include classified or proprietary material or information with classified, �Proprietary�, �Confidential�, or other markings limiting distribution. Any information submitted by respondents as a result of this notice is strictly voluntary. Companies are advised that Project Manager Expeditionary Energy & Sustainment Systems (PM E2S2) is supported by Government support contractors who will review information submitted in response to this RFI for the purpose of providing technical advice to the Government.� Companies which submit Submission Forms in response to this RFI will be deemed to have waived any objection to the Government's use of support contractors to review their Submission Forms.� The Government support contractors work under a contractual nondisclosure agreement which requires them to safeguard controlled technical information.� The contractor may not use, reproduce, modify or release controlled technical information without consent of the owner. Introduction Army Contracting Command � Aberdeen Proving Grounds, Belvoir is releasing this Request for Information (RFI) on behalf of the Project Manager (PM) Expeditionary Energy and Sustainment Systems (E2S2) and Product Manager Mobile Electric Power Systems (PM MEPS). The Government is not obligated to release a future solicitation. The information provided by industry will be used for market research to assess available technologies for a materiel solution with the capability to support the Platoon Power Generation (PPG) program. Responses shall not include classified or proprietary information. Material marked as, �Proprietary�, �Confidential�, or other markings limiting distribution will not be reviewed. In addition to the identified North American Industry Classification System (NAICS) Code listed, this Request for Information applies to the following NAICS codes. 325220 Artificial and Synthetic Fibers and Filaments Manufacturing 334413 Semiconductor and Related Device Manufacturing 334416 Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing 335312 Motor and Generator Manufacturing 335910 Battery manufacturing 335990 All other electrical equipment and component manufacturing 336410 Aerospace product and parts manufacturing Scope The increase of digital platforms and autonomous systems at the Platoon and Soldier levels continue to drive up power demands, increasing the total number of batteries required to support operational and tactical missions on the battlefield. To allow these formations to remain maneuverable and lethal on the battlefield, the Army requires a stand-alone power source to generate, recharge, detach, and swap power sources to maintain operational requirements up to 72 hours (3 days), reducing the number of batteries required to support the mission.� The materiel solution is envisioned to be a lightweight Soldier-portable power source, no more than 50 pounds (<50 lbs.) with an objective of less than 20 lbs. The capability must produce power output levels between 2-Kilowatts and 5-Kilowatts (2kW � 5kW) to charge batteries through high-capacity battery chargers. The capability will be the Platoon�s primary power source for recharging Soldier carried batteries during missions in austere environments where power resupply is limited or non-existent. This power is essential for supporting various operations, from communications and surveillance to weapons systems, medical support, and other mission critical functions. 1. Respondents are requested to provide an overview of the available technology and how it works to provide power generation capabilities. 2. Respondents must identify the technology readiness level (TRL) of the technology and explain the reasoning behind their assessment. REQUEST FOR WHITE PAPERS Interested vendors may submit white papers via .pdf document as an attachment via email to jessica.l.wright106.civ@army.mil and cc kadi-jah.l.sheridan.civ@army.mil no later than 18 November 2024, 12:00pm Eastern Time Zone, for consideration. Subject line must read RFI/PPG-[Company Name]. Example: RFI/PPG-ABC Inc. Responses shall be limited to 5 pages in length single sided, 12-point font, Times New Roman, one-inch margins. All communications shall be submitted in writing to jessica.l.wright106.civ@army.mil and kadi-jah.l.sheridan.civ@army.mil only. Contractors shall not contact any Government personnel regarding this RFI other than the individual designated above. Contacting any Government personnel other than the individual designated above may result in an organizational conflict of interest (OCI) and may result in a contractor being excluded from a solicitation, competition and consideration for award.� Cover Page of RFI response should include the following: Business Name Business Size Point of Contact Name Business Address Phone Number Email Address Cage Code Registered NAICS Code
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/9c749ae2cb614c3190eac3bd5466e968/view)
- Place of Performance
- Address: Fort Belvoir, VA 22060, USA
- Zip Code: 22060
- Country: USA
- Zip Code: 22060
- Record
- SN07231879-F 20241004/241003232215 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |