SAMDaily.us | SRCSGT | 59 | 2 NSN LTC SOURCES SOUGHT

SAMDAILY.US - ISSUE OF AUGUST 14, 2024 SAM #8296
SOURCES SOUGHT

59 -- 2 NSN LTC SOURCES SOUGHT

Notice Date: 8/12/2024 1:56:53 PM
Notice Type: Sources Sought
NAICS: 334418 — Printed Circuit Assembly (Electronic Assembly) Manufacturing
Contracting Office: DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
ZIP Code: 43218-3990
Solicitation Number: SPE7LX24R0071
Response Due: 8/21/2024 8:59:00 PM
Archive Date: 09/05/2024
Point of Contact: Scott D. Knowles, Phone: 6146920639
E-Mail Address: scott.knowles@dla.mil
(scott.knowles@dla.mil)
Description: ***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10.� �*****************� NO SOLICITATION IS BEING ISSUED AT THIS TIME� ***************************************************************�� The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. �Please review the below NSNs and provide us with any additional sources that are able to manufacture these items. �Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information. �All of this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. �Phone 614 692-0639. We thank you in advance for your assistance. NSN�� NAME�� 5998-01-526-7653�� ELECTRONIC COMPONENTS ASSEMBLY 5998-01-610-0547�� ELECTRONIC COMPONENTS ASSEMBLY Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary. NO SOLICITATION IS BEING ISSUED AT THIS TIME Below is the current item descriptions, SEE SOLICITATION WHEN ISSUED FOR MOST CURRENT REQUIREMENTS. NSN: 5998-01-526-7653 ELECTRONIC COMPONENT ASSEMBLY (LMTV, PROGRAMMED ELECTRONIC CONTROL � � �MODULE, ENGINE) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS � � �(MANUFACTURERS AND NON-MANUFACTURERS) RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL � � �REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ032: EXPORT CONTROL OF TECHNICAL DATA � � �This item has technical data some or all of which is subject to � � �export-control of either the International Traffic in Arms regulations � � �(ITAR) or the Export Administration Regulations (EAR), and cannot be � � �exported without prior authorization from either the Department of State � � �or the Department of Commerce. Export includes disclosure of technical � � �data to foreign persons and nationals whether located in the United � � �States or abroad. This requirement applies equally to foreign national � � �employees and U.S. companies and their foreign subsidiaries. DFARS � � �252.225-7048 is applicable to this data. � � �The Defense Logistics Agency (DLA) limits distribution of export-control � � �technical data to DLA contractors that have an approved US/Canada Joint � � �Certification Program (JCP) certification, have completed the � � �Introduction to Proper Handling of DOD Export-Controlled Technical Data � � �Training and the DLA Export-Controlled Technical Data Questionnaire � � �(both are available at the web address given below), and have been � � �approved by the DLA controlling authority to access the � � �export-controlled data. Instructions for obtaining access to the � � �export-controlled data can be found at: � � �https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ � � �To be eligible for award, offerors and any sources of supply proposed � � �for use are required to have an approved JCP certification and have � � �been approved by the DLA controlling authority to access � � �export-controlled data managed by DLA. DLA will not delay award in � � �order for an offeror or its supplier to apply for and receive approval � � �by the DLA controlling authority to access the export-controlled data. RD002: COVERED DEFENSE INFORMATION APPLIES CS120: NOTE: �THE CITED DRAWING IS A SOURCE CONTROLLED � � �DRAWING AND AS OF THE DATE OF THIS SOLICITATION � � �ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE � � �BEEN APPROVED. �EVEN THOUGH SOURCES AND APPROVED � � �PART NUMBERS ARE PROVIDED, THE ITEMS � � �FURNISHED MUST MEET THE REQUIREMENTS OF THE � � �CITED DRAWING. �OFFERORS WHO ARE INTERESTED IN � � �QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE � � �ACQUISITION MUST CONTACT THE COGNIZANT DESIGN � � �ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED � � �DRAWING. � � �ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES � � �THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT � � �THIS TIME. ZD054: CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED, � � �UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION. ZD080: �SAMPLING: � � �THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ � � �H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE � � �SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, � � �STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR � � �AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF � � �VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED � � �ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE � � �SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER � � �MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR � � �PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT � � �SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT � � �UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. BAE SYSTEMS LAND & ARMAMENTS L.P. 076M6 P/N 12422551-003 BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP 0FW39 P/N 12422551-003 OSHKOSH DEFENSE LLC 75Q65 P/N 12422551-003 IAW BASIC DRAWING NR 19207 12422551 � � �REVISION NR G � DTD 12/21/2023 � � �PART PIECE NUMBER: 12422551-003 � � �IAW REFERENCE DRAWING NR 19207 12422429 � � �REVISION NR F � DTD 09/05/2013 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12422550 � � �REVISION NR C � DTD 10/28/2010 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12422551-003 � � �REVISION NR � � DTD 03/04/2024 � � �PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1E QUP:001 �PRES MTHD:41 �CLNG/DRY:1 �PRESV MAT:00 WRAP MAT:00 �CUSH/DUNN MAT:NA �CUSH/DUNN THKNESS:D UNIT CONT:E5 �OPI:M INTRMDTE CONT:E5 �INTRMDTE CONT QTY:004 PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ZD079: OBJECT TEXT ID ST ZZ -ADDITIONAL SPECIAL MARKING: � � �Protected Cargo (Controlled, Sensitive, Classified, Pilferable items). � � �Special Marking Code 40 applies -- ""Markings shall be omitted for � � �sensitive, controlled or pilferable items per MIL-STD-129."" � � �The item description (nomenclature) shall be omitted from all shipping � � �containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 � � �(Protected Cargo) for more information. --------------------------------------------------------------------- NSN: 5998-01-610-0547 ELECTRONIC COMPONENTS ASSEMBLY ZD054: CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED, � � �UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RD002: COVERED DEFENSE INFORMATION APPLIES RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL � � �REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ032: EXPORT CONTROL OF TECHNICAL DATA � � �This item has technical data some or all of which is subject to � � �export-control of either the International Traffic in Arms regulations � � �(ITAR) or the Export Administration Regulations (EAR), and cannot be � � �exported without prior authorization from either the Department of State � � �or the Department of Commerce. Export includes disclosure of technical � � �data to foreign persons and nationals whether located in the United � � �States or abroad. This requirement applies equally to foreign national � � �employees and U.S. companies and their foreign subsidiaries. DFARS � � �252.225-7048 is applicable to this data. � � �The Defense Logistics Agency (DLA) limits distribution of export-control � � �technical data to DLA contractors that have an approved US/Canada Joint � � �Certification Program (JCP) certification, have completed the � � �Introduction to Proper Handling of DOD Export-Controlled Technical Data � � �Training and the DLA Export-Controlled Technical Data Questionnaire � � �(both are available at the web address given below), and have been � � �approved by the DLA controlling authority to access the � � �export-controlled data. Instructions for obtaining access to the � � �export-controlled data can be found at: � � �https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ � � �To be eligible for award, offerors and any sources of supply proposed � � �for use are required to have an approved JCP certification and have � � �been approved by the DLA controlling authority to access � � �export-controlled data managed by DLA. DLA will not delay award in � � �order for an offeror or its supplier to apply for and receive approval � � �by the DLA controlling authority to access the export-controlled data. CS120: NOTE: �THE CITED DRAWING IS A SOURCE CONTROLLED � � �DRAWING AND AS OF THE DATE OF THIS SOLICITATION � � �ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE � � �BEEN APPROVED. �EVEN THOUGH SOURCES AND APPROVED � � �PART NUMBERS ARE PROVIDED, THE ITEMS � � �FURNISHED MUST MEET THE REQUIREMENTS OF THE � � �CITED DRAWING. �OFFERORS WHO ARE INTERESTED IN � � �QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE � � �ACQUISITION MUST CONTACT THE COGNIZANT DESIGN � � �ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED � � �DRAWING. � � �ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES � � �THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT � � �THIS TIME. OSHKOSH DEFENSE LLC 75Q65 P/N 12422551-005 BAE SYSTEMS LAND & ARMAMENTS L.P. 076M6 P/N 12422551-005 BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP 0FW39 P/N 12422551-005 �IAW BASIC DRAWING NR 19207 12422551 �REVISION NR G � DTD 12/21/2023 �PART PIECE NUMBER: �IAW REFERENCE DRAWING NR 19207 12422429 �REVISION NR F � DTD 09/05/2013 �PART PIECE NUMBER: �IAW REFERENCE DRAWING NR 19207 12422550 �REVISION NR C � DTD 10/28/2010 �PART PIECE NUMBER: �IAW REFERENCE DRAWING NR 19207 12422551-005 �REVISION NR � � DTD 03/04/2024 �PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1E QUP:001 �PRES MTHD:41 �CLNG/DRY:1 �PRESV MAT:00 WRAP MAT:GB �CUSH/DUNN MAT:NA �CUSH/DUNN THKNESS:C UNIT CONT:BS �OPI:M INTRMDTE CONT:E5 �INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Web Link: SAM.gov Permalink
(https://sam.gov/opp/6c39a06a51da417396812f91a0093646/view)
Place of Performance: Address: Columbus, OH 43218, USA; Zip Code: 43218; Country: USA
Record: SN07167094-F 20240814/240812230124 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

59 -- 2 NSN LTC SOURCES SOUGHT