SOLICITATION NOTICE
J -- 52000QR240007035 USCGC CHARLES DAVIS JR HULL CLEANING
- Notice Date
- 8/7/2024 6:55:58 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- SFLC PROCUREMENT BRANCH 1(00080) NORFOLK VA 23510 USA
- ZIP Code
- 23510
- Solicitation Number
- 52000QR240007035
- Response Due
- 9/16/2024 6:00:00 AM
- Archive Date
- 10/01/2024
- Point of Contact
- Timothy ford, Phone: 15716084011, Stacy Spalding, Phone: 7576284664
- E-Mail Address
-
timothy.s.ford@uscg.mil, stacy.j.spalding@uscg.mil
(timothy.s.ford@uscg.mil, stacy.j.spalding@uscg.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- STATEMENT OF WORK CGC CHARLES DAVID JR (WPC 1107) Diver Hull Clean, Inspect & Zinc Anodes Renewal FSMS PR# 52000PR240007035 Description of Services: Contractor travel to CGC CHARLES DAVID JR homeport in Key West, FL to perform cleaning and inspection of underwater hull and running gear (appendages), polish PORT and STBD propellers, renewal of government-furnished zinc anodes/hardware, provide inspection report, before/after video and photographs IAW MPC's B10015.D and B10018.D. Cutters Maintenance Period: Complete during week of 23-27 SEP 2024 (scheduling to be arranged by cutter EPO) Cutter Homeport Location: USCGC CHARLES DAVID JR (WPC 1107) 100 Trumbo Point Road Key West, FL 33040-6650 Cutter Contact Info: EPO: MKC Clayton W. Wendelgass Email: Clayton.W.Wendelgass@uscg.mil PH: (727) 415-2040 Requisitioner Contact Info: SFLC-PBPL-APM: Roderick Stroud Email: Roderick.A.Stroud@uscg.mil PH: (757) 628-4531 IPP Approver Contact Info: SFLC-PBPL-Section Chief: LT Andrew Britton Email: Andrew.A.Britton@uscg.mil PH: (808) 634-6692 2 U/W Body (Waterborne), Diver Hull Clean, Inspect & Zinc Anodes Renewal 1. Scope 1.1 Intent. This work item describes the requirements for the Contractor to clean and inspect the vessel�s underwater (U/W) body, and to renew bolt-on zinc anodes, while the vessel is moored pier side. 1.2 Government-furnished property. MTI ITEM DESCRIPTION NSN/PN QTY ESTIMATED COST ($/UNIT) N Anode, Stern Tube NSN: 5340-01-644-5483 PN: Z0020202H3 28 ea. 13.25 N Nut, Self-Locking NSN: 5310-01-508-5774 PN: 90715A145 3 pkg. *25 in pkg. 8.38 N Anode, Sea Chest Grate NSN: 5340-01-647-6179 PN: GA-4 4 ea. 40.79 N Screw, Prop Zinc Plate NSN: 5305-01-634-0210 PN: 950756 8 ea. 16.13 N Screw, Sea Chest Grate Anode NSN: 5305-01-619-7182 PN: 93190A634 1 pkg. *5 in pkg. 8.60 N Screw Cap, Stern Tube Covers NSN: 5305-01-616-1107 PN: 90585A626 42 ea. 1.50 N Zinc Plate, Propeller NSN: 5340-01-627-8941 PN: 950733 2 ea. 914.60 N Anode, Bow Thruster, Gear Case, Bolt On NSN: 5342-12-356-1870 PN: 1081226 1 ea. 65.31 N Anode, Bow Thruster, Tunnel, Bolt On NSN: 5340-20-012-6334 PN: CM2000Z 12 ea. 27.43 2. REFERENCES COAST GUARD DRAWINGS Coast Guard Drawing 154 WPC 111-301, Rev B, Shell Expansion Coast Guard Drawing 154 WPC 161-301, Rev C, Skegs and Stern Tubes Support Structures Coast Guard Drawing 154 WPC 245-304, Rev B, Propeller Plans and Data Six Blade Propeller Coast Guard Drawing 154 WPC 562-201, Rev A, Rudder Details Coast Guard Drawing 154 WPC 565-201, Rev -, Fin Stabilizer System A & D Coast Guard Drawing 154 WPC 568-201, Rev B, Bow Thruster System A & D Coast Guard Drawing 154 WPC 997-302, Rev -, Docking Plan COAST GUARD PUBLICATIONS Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General Requirements Surface Forces Logistics Center Maintenance Procedure Card B10015.D (MPC B10015.D), 8/31/23, Underwater Body and Appendages Inspect/Clean (Diver) Surface Forces Logistics Center Maintenance Procedure Card B10018.D (MPC B10018.D), 5/31/23, Underwater Zinc Anode Replace OTHER REFERENCES None 3. REQUIREMENTS 3.1 General. 3.1.1 CIR. None. 3.1.2 Tech Rep. None. 3.1.3 Protective measures. The Contractor must furnish and install all protective measures in accordance with SFLC Std Spec 0000, paragraph 3.3.3 (Vessel component, space, and equipment protection). 3.1.4 Interferences. The Contractor must handle all interferences in accordance with SFLC Std Spec 0000, paragraph 3.3.5 (Interferences). 3.2 Requirements. The Contractor must: 3.2.1 Video recording/photographs. Submit video highlights and photographs of all underwater body surfaces and appendages (e.g. bow thruster, propellers, rudders, fin stabilizers, transducers, sea chests, heavily fouled hull areas, etc.) before and after cleaning. 3.2.2 Clean/inspect. Clean the underwater body surfaces and appendages free of all marine growth, debris, and all other surface contaminants, to include inspections in accordance with MPC B10015.D. Polish the surfaces of both PORT and STBD propellers. Ensure all transducer surfaces are cleaned with only hand held brushes, without the use of power attachments. Ensure that existing underwater body coating system or non-coated surfaces do not incur any damage during cleaning process. Refer to Coast Guard drawings listed in Section 2. 3.2.3 Renew anodes. Renew Government-furnished components listed below paragraph 1.2. in accordance with MPC B10018.D.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/370689b2181b4a6f98fc09124c5e440e/view)
- Place of Performance
- Address: Key West, FL 33040, USA
- Zip Code: 33040
- Country: USA
- Zip Code: 33040
- Record
- SN07159958-F 20240809/240807230116 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |