MODIFICATION
53 -- CAP SCREW, SCH FLH 82-MODIFIED
- Notice Date
- 7/31/2024 5:27:47 AM
- Notice Type
- Solicitation
- NAICS
- 332722
— Bolt, Nut, Screw, Rivet, and Washer Manufacturing
- Contracting Office
- DLA MARITIME - NORFOLK PORTSMOUTH VA 23709-5000 USA
- ZIP Code
- 23709-5000
- Solicitation Number
- SPMYM124Q0162
- Response Due
- 8/7/2024 2:00:00 PM
- Archive Date
- 08/22/2024
- Point of Contact
- DAVID MOOTZ, Phone: 7572788372
- E-Mail Address
-
DAVID.MOOTZ@DLA.GOV
(DAVID.MOOTZ@DLA.GOV)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract for the items listed below. The award determination will be lowest price technically acceptable (LPTA). The required items are for commercial items prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice. The Contract Line Items (CLINs) are as follows: CLIN 0001-4164-B065 QTY: 9 CAP SCREW, SCH FLH 82; 1.375-6UNRC-2A X 4.250; (ASTM B446, GR-1, ALY-N06625). SELF LOCKING, MIL-DTL-18240 REV. F, AM. 1 TY N, FF-S-86H.� MODIFIED AS FOLLOWS: .281 DIAMETER PELLET, .250-.281 DEPTH OF HOLE DRILLED FOR PELLET, .557-.723 DISTANCE FROM CENTERLINE OF HOLE TO END OF BOLT, 1.367 - 1.377 DIAMETERAL DIMENSION AT INSERT ROD LOCATION, 193 INCH LBS MINIMUM BREAKAWAY TORQUE & 1200 INCH LBS MAXIMUM LOCKING TORQUE INSTALLATION OR REMOVAL. CLIN 0002-4164-B066 QTY: 9 CAP SCREW, SCH FLH 82, 1.375-6UNRC-2A X 4.500, (ASTM B446 GR-1. ALY-N06625), SLF/LKG MIL-DTL-18240 REV. F. AM. 1 TY N FF-S-86H.� MODIFIED AS FOLLOWS: .281 DIAMETER PELLET, .250-.281 DEPTH OF HOLE DRILLED FOR PELLET, .557-.723 DISTANCE FROM CENTERLINE OF HOLE TO END OF BOLT, 1.367 - 1.377 DIAMETERAL DIMENSION AT INSERT ROD LOCATION, 193 INCH LBS MINIMUM BREAKAWAY TORQUE & 1200 INCH LBS MAXIMUM LOCKING TORQUE INSTALLATION OR REMOVAL. CLIN 0003-4164-B075 QTY: 1 CAP SCREW, SCH FLH 82, 1.375-6UNRC-2A X 4.750, (ASTM B446 GR-1, ALY-N06625), SLF/LKG MIL-DTL-18240 REV. F AM. 1 TY N FF-S-86H.� MODIFIED AS FOLLOWS: .281 DIAMETER PELLET, .250-.281 DEPTH OF HOLE DRILLED FOR PELLET, .557-.723 DISTANCE FROM CENTERLINE OF HOLE TO END OF BOLT, 1.367 - 1.377 DIAMETERAL DIMENSION AT INSERT ROD LOCATION, 193 INCH LBS MINIMUM BREAKAWAY TORQUE & 1200 INCH LBS MAXIMUM LOCKING TORQUE INSTALLATION OR REMOVAL See Ordering Data and OQE attachment for additional requirement details. The NAICS code applicable to this procurement is 332722- Bolt, Nut, Screw, Rivet, and Washer Manufacturing. The Product Service Code is 5305, Screws. The anticipated delivery date for this acquisition is 120 DAYS after contract award. This requirement will need modifications as listed in the CLINs/Ordering Data. The request for quote, any documents related to this procurement, and all amendments issued will be in electronic form only. The solicitation number is SPMYM124Q0162, and it will be posted to SAM.gov, https://sam.gov/. The solicitation shall be filled out and will be due by 5:00 PM EST on 7 AUG 2024. Responses to the solicitation notice shall be emailed to the attention of David Mootz at david.mootz@dla.mil.� Please make sure that the solicitation number (SPMYM12Q0162) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues. Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed. All responsible sources may submit a proposal which may be considered by the Government. By submitting an offer, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates, and procedures. Please direct all questions regarding this requirement to David Mootz at david.mootz@dla.mil.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/de984f5b1eea44c3be89d6080d39cc50/view)
- Place of Performance
- Address: Portsmouth, VA 23709, USA
- Zip Code: 23709
- Country: USA
- Zip Code: 23709
- Record
- SN07150111-F 20240802/240731230118 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |