SOURCES SOUGHT
65 -- Ortho Trays
- Notice Date
- 5/28/2024 9:49:30 AM
- Notice Type
- Sources Sought
- NAICS
- 339112
— Surgical and Medical Instrument Manufacturing
- Contracting Office
- 262-NETWORK CONTRACT OFFICE 22 (36C262) Gilbert AZ 85297 USA
- ZIP Code
- 85297
- Solicitation Number
- 36C26224Q1238
- Response Due
- 5/31/2024 1:00:00 PM
- Archive Date
- 06/30/2024
- Point of Contact
- Carlo Manuel, CARLO.MANUEL@VA.GOV, Phone: 562-503-7111
- E-Mail Address
-
carlo.manuel@va.gov
(carlo.manuel@va.gov)
- Awardee
- null
- Description
- Sources Sought Notice Sources Sought Notice Page 6 of 6 Sources Sought Notice *= Required Field Sources Sought Notice Page 1 of 6 THIS REQUEST FOR INFORMATION (RFI) IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AND OTHER MARKET INFORMATION IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT DESCRIPTION This is NOT a solicitation announcement. This is a sources sought/RFI only. The purpose of this sources sought/RFI is to gain knowledge of potential qualified sources and their size classification relative to NAICS 339112 (size standard 1,000). Responses to this sources sought will be used by the Government to make appropriate acquisition decisions. After review of the responses to this sources sought, a solicitation announcement may be published. Responses to this sources sought synopsis are not considered adequate responses for a solicitation announcement. The Department of Veterans Affairs (VA), VISN 22 Network Contracting Office, is seeking sources that can provide an Ultrasound System that meets the following salient characteristics and specifications for the VA Phoenix Healthcare System. **Manufacture is Stryker** Ortho Description Quantity 2.0 mm ASNIS MICRO, CANNULATED DRILL 1.7 mm, AO COUPLING, SINGLE USE 4 2.0 mm ASNIS MICRO, CANNULATED COUNTERSINK 2.8mm, AO COUPLING, SINGLE USE 4 2.0 mm ASNIS MICRO, K-WIRE 0.8 mm X 100 mm 6 3.0 mm ASNIS MICRO, CANNULATED DRILL 2.1mm, AO COUPLING, SINGLE USE 4 3.0 mm ASNIS MICRO, CANNULATED COUNTERSINK 3.8mm, AO COUPLING, SINGLE USE 4 3.0 mm ASNIS MICRO, K-WIRE 1.2 mm X 100 mm 6 CANN 2.7mm TWIST DRILL W/ AO F 4 CANN COUNTERSINK 4.0 W/ AO FIT 4 CANN 4.0mm TWIST DRILL W/ AO 3 CANN 3.5mm DIA. TWIST DRILL 4 CANN COUNTERSINK 5.0 W/ AO FIT 4 CANN SCREWDRIVER HEX 3.5mm/AO 2 CANN 5.0mm TWIST DRILL W/ AO 2 ASNIS III NON-THREADED GUIDE WIRE 3.2X300mm 15 ASNIS III CANNULATED 6.5mm TWIST DRILL 4 ASNIS III CANNULATED DRILL 5.6mm LG AO 4 ASNIS III CANNULATED COUNTERSINK 6.5/8.0 AO FITTING 4 FIXO'S GUIDE WIRE 0.9MM X 70MM 5 K-WIRE DIAM. 1MM LG. 100MM 5 CANNULATED DRILL BIT Ø1.7MM L32MM AO 3 CANNULATED DRILL BIT & COUNTERSINK Ø1.7MM L12MM AO 3 CANNULATED DRILL BIT & COUNTERSINK Ø2MM L17MM AO 3 CANNULATED DRILL BIT & COUNTERSINK Ø2MM L23MM AO 3 CANNULATED DRILL BIT & COUNTERSINK Ø2MM L31MM AO 3 UNTHREADED GUIDE WIRE Ø1.4mm x 150mm 15 CANNULATED DRILL Ø2.7mm AO FITTING 4 CANNULATED COUNTERSINK Ø4.0mm AO FITTING 4 UNTHREADED GUIDE WIRE Ø2.0mm x 150mm 20 CANNULATED DRILL Ø3.5mm AO FITTING 4 CANNULATED COUNTERSINK Ø5.0mm AO FITTING 4 UNTHREADED GUIDE WIRE Ø3.2mm x 230mm 15 CANNULATED DRILL Ø4.9mm LARGE AO FITTING 4 CANNULATED COUNTERSINK Ø7.0mm LARGE AO FITTING 4 1.9MM CANNULATED DRILL BIT 4 2.1MM CANNULATED DRILL BIT 4 2.6MM CANNULATED DRILL BIT 4 2.5MM NON-THREADED KWIRE 5 3.0MM NON-THREADED KWIRE 5 4.0MM NON-THREADED KWIRE 5 2.5MM DEPTH GAUGE/ COUNTERSINK (YELLOW) 2 3.0MM DEPTH GAUGE/ COUNTERSINK (GREEN) 2 4.0MM DEPTH GAUGE/ COUNTERSINK (BLUE) 2 EZ CLIP 2 MM POSITIONING PIN 2 EZ CLIP 3 MM POSITIONING PIN 2 2 MM CALIBRATED REAMER 2 3 MM CALIBRATED REAMER 2 DRILL AO SCALED 2.0MM L105MM 2 OVERDRILL AO, DIA 2.7mm x 122mm 2 OVERDRILL AO, DIA 2.4mm x 122mm 2 COUNTERSINK AO FOR 2.0MM - 2.7MM SCREWS 5 DRILL BIT, AO DIA 2.0mm x 135mm, SCALED 5 DRILL AO SCALED 1.6MM L96MM 4 OVERDRILL AO 2.0MM L122MM 1 K-WIRE TROCAR POINT 1 K-WIRE 1.25X150mm SS 8 K-WIRE WITH STOP 1.6MM L150MM 1 K-WIRE TROCAR POINT - 10 PACK 4 COUNTERSINK FOR SCREWS 02.7/3.5mm AO FITTING 8 STEINMANN PIN SMOOTH 2.5mm X 100mm 2 DRILL AO SCALED 2.0MM L105MM 4 5mm PROTECTIVE TIP CAPS BLUE 2 SMART TOE SURFACING REAMER 4 SHARP DRILL BIT DIA 2 MM AO LG 70 4 STOP DRILL BIT DIA 2 MM AO 4 SMART TOE POSITIONER 2 CONVEX REAMER -016 2 CONVEX REAMER -018 2 CONVEX REAMER - 020 2 CONVEX REAMER -022 2 CONCAVE REAMER - 016 2 CONCAVE REAMER - 018 2 CONCAVE REAMER - 020 2 CONCAVE REAMER - 022 6 ANCHORAGE 1.6MM X 100MM GUIDE WIRE 4 DRILL BIT 2.0MM X 30MM 4 DRILL BIT 2.5MM X 60MM 4 DRILL BIT 2.8MM X 60MM 4 DRILL BIT 3.0MM X 60MM CANN 4 DRILL BIT 3.5MM X 60MM 6 DRILL BIT 4.0MM X 60MM 6 K-WIRE 1.2 X 150MM 150MM LONG SMOOTH TIP 6 SINGLE TROCAR WIRE 1.6X150MM CHARLOTTE F AND A SYSTEM 6 TEMP FIXATION PIN 1.1MM SMALL NON-THREADED PLATE TACKS 8 TEMP FIXATION PIN 1.4MM LG 4 K-WIRE 1.4 X150MM BLUNT/TROCAR 2 COUNTERSINK 2.4MM CANNULATED DART-FIRE COMPRESSION SCREW 2 COUNTERSINK 2.8MM CANNULATED DART-FIRE COMPRESSION SCREW 2 COUNTERSINK 4.0MM CANNULATED DART-FIRE COMPRESSION SCREW 2 COUNTERSINK 5.0MM CANNULATED DART-FIRE COMPRESSION SCREW 2 COUNTERSINK 6.0MM CANNULATED DART-FIRE COMPRESSION SCREW 2 K-WIRE 0.9 X150MM BLUNT/TROCAR 5 K-WIRE 1.1 X150MM BLUNT/TROCAR 5 K-WIRE 1.4 X150MM BLUNT/TROCAR 5 DRILL BIT 1.7MM CANNULATED DART-FIRE COMPRESSION SCREW 2 DRILL BIT 2.0MM CANNULATED DART-FIRE COMPRESSION SCREW 2 DRILL BIT 2.2MM CANNULATED DART-FIRE COMPRESSION SCREW 2 DRILL BIT 2.5MM CANNULATED DART-FIRE COMPRESSION SCREW 2 DRILL BIT 3.0MM CANNULATED DART-FIRE COMPRESSION SCREW 2 Salient Characteristics These implants are for the back stock of the Ortho Clinic and will be used in certain procedures. All trays must include instrumentation, implants, and any disposables. The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications. If you are interested and are capable of providing the sought out supplies/services, please provide the requested information as well as the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Please indicate the size status and representations of your business, such as but not limited to: Service Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.)? (2) Is your company considered small under the NAICS code identified under this RFI? (3) Are you the manufacturer, distributor, or an equivalent solution to the items being referenced above? (4) If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, point of Contact and size status (if available). (5) If you re a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? (6) Does your company have an FSS contract with GSA or the NAC or are you a contract holder with NASA SEWP or any other federal contract? If so, please provide the contract number. (7) If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the items/solution you are providing information for available on your schedule/contract? (8) Please provide general pricing of your products/solution for market research purposes. (9) Please submit your capabilities in regards to the salient characteristics being provided and any information pertaining to equal to items to establish capabilities for planning purposes? (10) Please review salient characteristics/statement of work (if applicable) and provide feedback or suggestions. If none, please reply as N/A. (11) Please provide your SAM Identification Number. (12) Please provide a list of detail requirements and drawings. *** Submissions addressing Section (8) should show clear, compelling and convincing*** evidence that all equal to items"" meet all required salient characteristics. Responses to this notice shall be submitted via email to Carlo.manuel@va.gov. Telephone responses shall not be accepted. Responses must be received no later than Friday, May 31, 2024, at 1:00 PM PST. If a solicitation is issued it shall be announced at a later date, and all interested parties must respond to that solicitation announcement separately from the responses to this request for information. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/536923753f524ceb9c10f1ff28a99af9/view)
- Place of Performance
- Address: DEPARTMENT OF VETERANS AFFAIRS VA PHOENIX HEALTHCARE SYSTEM 650 E. INDIAN SCHOOL RD., PHOENIX 85012
- Zip Code: 85012
- Zip Code: 85012
- Record
- SN07078728-F 20240530/240529051427 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |