Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF MAY 11, 2024 SAM #8201
SOLICITATION NOTICE

65 -- Needle Acupuncture

Notice Date

5/9/2024 7:39:46 AM
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

339113 — Surgical Appliance and Supplies Manufacturing
 

Contracting Office

DLA TROOP SUPPORT PHILADELPHIA PA 19111 USA
 

ZIP Code

19111
 

Solicitation Number

MS-2312-11
 

Response Due

5/23/2024 2:00:00 PM
 

Archive Date

11/03/2024
 

Point of Contact

Dr. Jim Quinn Lead MMESO South Clinical Analyst Contractor, Moises Soto
 

E-Mail Address

james.e.quinn28.ctr@mail.mil, moises.soto1.ctr@health.mil
(james.e.quinn28.ctr@mail.mil, moises.soto1.ctr@health.mil)
 

Description

The purpose of this Modification to the Notice of Intent to Establish a QSL is to inform qualified entities interested in providing these services that the release of the QSL Announcement for MS-2312-11 Needle Acupuncture, has been issued. All solicitation information is available on the SAM.gov website. The Defense Health Agency (DHA) Medical Logistics (MEDLOG) Division Medical Materiel Enterprise Standardization Office (MMESO) and the Defense Logistics Agency (DLA) Troop Support Medical Prime Vendor (PV) Program announce a Sources Sought notification for the creation of a Qualified Suppliers Listing (QSL) for Needle Acupuncture. This is not a request for a price quote. The MMESO South is the lead MMESO for this project. These Needle Acupuncture products are for purchase by the Military Treatment Facilities (MTFs) of the Military Health System (MHS) and for the operational assemblages of the Army, Navy, Air Force, Marine Corps, and Naval Expeditionary Medical Support Command (NEMSCOM) and managed regionally by MMESOs North, South, West, Pacific and Europe, hereafter referred to as MMESOs. For information regarding DLA Troop Support Medical�s PV program please access the DMM Online web site at https://www.medical.dla.mil. This Sources Sought notification is intended to solicit information and products for evaluation in order to create a QSL for Needle Acupuncture in accordance with (IAW) FAR 9.2. The QSL for Needle Acupuncture will be established approximately 01 August 2024 and is anticipated to be the basis of a Standardization Action. All medical consumable items on this QSL must be on a Distribution and Pricing Agreement (DAPA) for the DLA Troop Support Medical/Surgical Prime Vendor (MSPV) Program. All participating vendors must complete the registration in the DAPA Management System (DMS) at https://www.medical.dla.mil/Portal/DapaMS/DapaMS.aspx and include either their DAPA number or their Defense Medical Materiel (DMM) number as part of their QSL Package Worksheet submission. Receiving a DMM number allows access to the DMS and is the first step to becoming a DAPA holder. DAPA holders must be prepared to ship items to the PVs, so that the PVs may carry inventory and MTFs may designate items as usage; therefore, standardized items may not be coded in the DMS as ""drop ship only."" NOTE: It is recommended that new participants contact each PV prior to adding items to DAPA, in order to gain a full understanding of the PV's requirements and any potential costs associated with PV handling of those items. If you qualify as a vendor on the QSL, you will then be invited, approximately 10 August 2024, to submit pricing quotes and a separate screenshot of your submitted DAPA Log submission or existing DAPA base uncommitted pricing for all required items to the MMESO POCs. Both pricing quotes and substantiating DMS documentation will be required for eligibility to enter into an Incentive Agreement (IA) for Needle Acupuncture. Only those vendors with an established DAPA will be eligible to enter into the subsequent IA. The Government reserves the right to standardize or not standardize on Needle Acupuncture. The resulting IA will not be a contract and will not constitute a guarantee of a specific volume of sales dollars. � The MSPV Program requires that all items be manufactured in a Trade Agreements Act (TAA) Compliant Country (see DFARS 252.225-7020 AND 252.225-7021), unless it is determined that no functionally equivalent item is available from a compliant source. To be eligible for inclusion in the proposed QSL, all vendors are required to provide country of origin information in the QSL Package Worksheet. In addition, according to the DAPA Terms and Conditions, vendors must complete the DAPA TAA Certification for each item quoted. If a quoted item is a TAA Non-Compliant End Product, the Government can use this information to determine whether or not a non-availability determination exists or if the Government will make a non-availability determination for the item. Unless a non-availability determination is made or a waiver is obtained, TAA Non-Compliant Country End Products cannot be added to the QSL and/or DAPA. NOTE: The Contracting Officer will review submissions in response to the subsequent IA for Needle Acupuncture for country of origin purposes. Only vendors on the QSL who offer items which are US made, designated country, or qualifying country end products will be considered for an IA, unless the Contracting Officer determines that no functional equivalent item is available from a compliant source in accordance with DFARS 225.403(c)(i). Vendors are advised to keep this in mind when submitting their response to this Sources Sought notification. A. Products & Performance Required The MMESOs are seeking product line items in the category of Needle Acupuncture. Within the MHS MTFs and operational procurement this product line has an estimated annual sales volume of $695,280. This forecast is a good faith estimate based on historical usage data during a recent 12-month period and does not constitute a guarantee of a specific volume of sales dollars. Twenty-two items are required for addition to the QSL and account for 92.3% ($641,806) of the total volume in sales $695,280. The specifications for this project are shown in the �Requirements to Qualify for QSL� section below. B. Instructions to Vendors to Qualify for the QSL Vendors interested in qualifying for inclusion in the QSL must respond to this QSL Sources Sought notification by sending the appropriate QSL Package Worksheet and all supporting documentation via e-mail to the lead MMESO and DLA POCs below. The QSL requirements are outlined under Requirements to Qualify for QSL outlined below. Vendor must complete the QSL Package Worksheet in full to the MMESO POCs and DLA POC as listed in the QSL Source Sought notification by the above response date. The vendor�s submission must include all detailed information requested in the �Requirements to Qualify for QSL� section below and must also include: (1) Company name and address; (2) Company POC (Name and Phone Number, Fax Number, and E-mail address); (3) Commercial and Government Entity (CAGE) Code; (4) Identification of the Sources Sought notification to which the vendor is responding, and (5) DAPA or DMM number. Only ONE Manufacturer Part Number may be provided for each product description listed in Requirement 5 per submitted response. Vendors may provide multiple responses/submissions to the QSL Source Sought notification. Vendor must offer commercially available products for all items offered in response to this Sources Sought notification. Supporting documentation must be in form of commercially available catalogs and product literature (e.g. brochures, user manuals, product packaging, product specification sheets, product images, etc.). Due to the potential for e-mail to be lost in transmission, from network security, etc., vendors are strongly encouraged to confirm with the lead MMESO that their e-mail submission has arrived. Each submitting vendor is advised to confirm receipt allowing adequate time for resubmission before the due date and time. Any vendor experiencing difficulty opening the Worksheet may contact the MMESO POCs. The MMESO POC will provide a Worksheet copy via an alternate method (fax, e-mail or hard copy). Vendors that do not meet the deadline of COB 5:00 PM local Philadelphia time for this QSL Sources Sought notification will not be included in the lead MMESO�s review to establish the QSL and thus will not be able to participate in the subsequent Standardization Action. Requirements to Qualify for QSL The requirements for this product line are outlined below. Complete answers and all supporting documentation must be provided with the vendor�s submittal by the response date stated in this QSL Sources Sought notification. A vendor who does not meet all of these requirements or who does not submit documentation to support these requirements as requested will not be qualified for the QSL. Vendors must provide responses to this Sources Sought notification via the QSL Package Worksheet. Technical Review Supplier Requirements: � Vendor must have a DAPA or be in the process of applying for a DAPA number for the product line listed. Vendor must provide their DAPA number or provide date of application and DMM number proving access to the DMS, as the subsequent Standardization Action requires vendors to have all required items on DAPA. Vendor must have an agreement with the current DoD Medical/Surgical Prime Vendor CARDINAL HEALTH, or must work with CARDINAL HEALTH to initiate an agreement, as standardized items from this QSL will be distributed via the MSPV program. Vendor must have an agreement with the current DoD Medical/Surgical Prime Vendor OWENS & MINOR, or must work with OWENS & MINOR to initiate an agreement, as standardized items from this QSL will be distributed via the MSPV program. Vendors must validate that their account is Active in the System for Award Management (SAM) and provide CAGE Code. Vendors in the process of obtaining a CAGE Code must provide documentation to support that they have registered in SAM. Vendors without a CAGE Code and/or a SAM account will not be considered for participation in the subsequent Standardization Action. See https://www.sam.gov/SAM/. Required Products: 5. Vendor must provide manufacturer part numbers that meet the product descriptions below. Vendor must submit the following information via QSL Response Worksheet for each offered product: Vendor Part Number, Manufacturer Part Number, Manufacturer Name, Full Item Description, Unit of Measure (UOM), Quantity (QTY) in UOM, Unit of Inner Packaging (UOP), QTY of UOM in UOP, Unit of Sale (UOS), and QTY of UOM in UOS. Vendor must provide product catalog and literature for any items offered in response to this Sources Sought notification. Only ONE Vendor Part Number should be provided for each item/sample. Vendor must send the same part number(s) for evaluation(s) as provided in response to this QSL Announcement and as noted in the QSL Package Worksheet. The vendor must provide country of origin for all required items and any optional items offered. REQUIRED ITEMS ANNUAL USAGE IN UNITS 5.1� NEEDLE ACUPUNCTURE, AURICULAR, SEMI-PERMANENT, 2MM DIAMETER BY 5MM LENGTH, GOLD-PLATED STAINLESS STEEL NEEDLE WITH NEEDLE INJECTOR, 200 PER BOX / 540712 5.2� NEEDLE ACUPUNCTURE, AURICULAR, SEMI-PERMANENT, 2MM DIAMETER BY 5MM LENGTH, GOLD-PLATED STAINLESS STEEL NEEDLE WITH NEEDLE INJECTOR, 80 PER BOX / 51680 5.3� NEEDLE ACUPUNCTURE, AURICULAR, SEMI-PERMANENT, 2MM DIAMETER BY 5MM LENGTH, STAINLESS STEEL NEEDLE WITH NEEDLE INJECTOR, 200 PER BOX / 9200 5.4� NEEDLE ACUPUNCTURE, AURICULAR, SEMI-PERMANENT, 2MM DIAMETER BY 5MM LENGTH, TITANIUM NEEDLE WITH NEEDLE INJECTOR, 80 PER BOX / 12400� 5.5� NEEDLE ACUPUNCTURE, GENERAL USE, 0.14MM DIAMETER BY 15MM LENGTH, STAINLESS STEEL NEEDLE WITH PLASTIC HANDLE AND GUIDE TUBE (J-TYPE) / 192000 5.6� NEEDLE ACUPUNCTURE, GENERAL USE, 0.20MM DIAMETER BY 30MM LENGTH, STAINLESS STEEL NEEDLE WITH PLASTIC HANDLE AND GUIDE TUBE (J-TYPE) / 179800 5.7� NEEDLE ACUPUNCTURE, GENERAL USE, 0.25MM DIAMETER BY 30MM LENGTH, STAINLESS STEEL NEEDLE WITH PLASTIC HANDLE AND GUIDE TUBE (J-TYPE) / 46300 5.8� NEEDLE ACUPUNCTURE, GENERAL USE, 0.25MM DIAMETER BY 40MM LENGTH, STAINLESS STEEL NEEDLE WITH PLASTIC HANDLE AND GUIDE TUBE (J-TYPE) / 62700 5.9� NEEDLE ACUPUNCTURE, GENERAL USE, 0.30MM DIAMETER BY 30MM LENGTH, STAINLESS STEEL NEEDLE WITH PLASTIC HANDLE AND GUIDE TUBE (J-TYPE) / 107700 5.10� NEEDLE ACUPUNCTURE, GENERAL USE, 0.30MM DIAMETER BY 40MM LENGTH, STAINLESS STEEL NEEDLE WITH PLASTIC HANDLE AND GUIDE TUBE (J-TYPE) / 88500 5.11� NEEDLE ACUPUNCTURE, GENERAL USE, 0.30MM DIAMETER BY 50MM LENGTH, STAINLESS STEEL NEEDLE WITH PLASTIC HANDLE AND GUIDE TUBE (J-TYPE) / 194800 5.12� NEEDLE ACUPUNCTURE, GENERAL USE, 0.30MM DIAMETER BY 60MM LENGTH, STAINLESS STEEL NEEDLE WITH PLASTIC HANDLE AND GUIDE TUBE (J-TYPE) / 97800 5.13� NEEDLE ACUPUNCTURE, GENERAL USE, 0.20MM DIAMETER BY 30MM LENGTH, STAINLESS STEEL NEEDLE WITH SPRING STYLE METAL HANDLE AND GUIDE TUBE (L-TYPE) / 29400 5.14� NEEDLE ACUPUNCTURE, GENERAL USE, 0.25MM DIAMETER BY 30MM LENGTH, STAINLESS STEEL NEEDLE WITH SPRING STYLE METAL HANDLE AND GUIDE TUBE (L-TYPE) / 31000 5.15� NEEDLE ACUPUNCTURE, GENERAL USE, 0.25MM DIAMETER BY 40MM LENGTH, STAINLESS STEEL NEEDLE WITH SPRING STYLE METAL HANDLE AND GUIDE TUBE (L-TYPE) / 157600 5.16� NEEDLE ACUPUNCTURE, GENERAL USE, 0.25MM DIAMETER BY 60MM LENGTH, STAINLESS STEEL NEEDLE WITH SPRING STYLE METAL HANDLE AND GUIDE TUBE (L-TYPE) / 61000 5.17� NEEDLE ACUPUNCTURE, GENERAL USE, 0.30MM DIAMETER BY 60MM LENGTH, STAINLESS STEEL NEEDLE WITH SPRING STYLE METAL HANDLE AND GUIDE TUBE (L-TYPE) / 131100 Vendor must provide Needle Acupuncture products that are not made with natural rubber latex. Vendor must also provide submittal documentation establishing that the offered products are not made with natural rubber latex. The vendor must meet this requirement in one of three ways: 1) demonstrating that the labeling or product information for the offered products contains the FDA recommended statement ""Not made with natural rubber latex,"" 2) demonstrating that the ISO BS EN 15223-1:2021 symbol [reference number 5.4.5 with Annex B.2 Negation Symbol] is on the labeling or product information for the offered products, or 3) if the labeling or product information do not contain the FDA recommended statement or the ISO BS EN 15223-1:2021 symbol [reference number 5.4.5 with Annex B.2 Negation Symbol], the vendor must provide a signed letter stating that the offered products are ""not made with natural rubber latex."" Vendor must provide Needle Acupuncture products whose packaged contents are sterile. The vendor must meet this requirement in one of two ways:� 1) indicated as such on the individual product packaging; whether in printed language or by an accepted ISO BS EN 15223-1:2021 sterile symbol [reference number 5.2.1, or 2,3,4, 5] if the labeling or product information do not contain the ISO BS EN 15223-1:2021 symbol [reference number 5.2.1, or 2,3,4, 5], the vendor must provide a signed letter stating that the offered products are sterile. Vendor must provide Needle Acupuncture products that are single-use items. The vendor must meet this requirement in one of three ways: 1) demonstrating that the labeling or product information for the offered products contains the recommended statement ""single use�, ""use only once�, �do not re-use� or �do not re-sterilize�, 2) demonstrating that the ISO BS EN 15223-1:2021 symbol [reference number 5.4.2] single-use symbol is on the labeling or product information for the offered products, or 3) if the labeling or product information do not contain the ISO BS EN 15223-1:2021 symbol [reference number 5.4.2], the vendor must provide a signed letter stating that the offered products are single-use. Vendor must provide General Use Needle Acupuncture products that are individually packaged unless otherwise noted in product description and provide documentation to support this with initial submittal. Vendor must provide General Use Needle Acupuncture products that are packaged with an overwrap (e.g., peel package/blister pack) and provide supporting documentation with initial submission. Vendor must provide General Use Needle Acupuncture products with a label on the outer box stating length and diameter or gauge of packaged needle and documentation to support this with initial submittal. Vendor must provide General Use Needle Acupuncture products that are packaged with no more than 100 per box/1000 per case unless otherwise noted in product description and provide documentation to support this with initial submittal.� Vendor must provide Auricular Press Needle Acupuncture products that are packaged with hypoallergenic adhesive tape and documentation to support this with initial submittal. Vendor must provide Semi-Permanent Auricular Needle Acupuncture products that are packaged with a magnet and documentation to support this with initial submittal. Vendor MAY provide any or all of the optional items listed below, following the same format as for requirement number 5. Vendor must provide a letter of attestation, INCLUDING a list of part numbers for the submitted optional items, stating that the offered products meet requirements 6-14. Optional Products NEEDLE ACUPUNCTURE, GENERAL USE, 0.25MM DIAMETER BY 40MM LENGTH, STAINLESS STEEL NEEDLE WITH SPRING STYLE METAL HANDLE AND GUIDE TUBE (L-TYPE), 10 NEEDLES WITH 1 GUIDE TUBE PER PACK NEEDLE ACUPUNCTURE, GENERAL USE, 0.25MM DIAMETER BY 30MM LENGTH, STAINLESS STEEL NEEDLE WITH SPRING STYLE METAL HANDLE AND GUIDE TUBE (L-TYPE), 10 NEEDLES WITH 1 GUIDE TUBE PER PACK NEEDLE ACUPUNCTURE, GENERAL USE, 0.20MM DIAMETER BY 30MM LENGTH, STAINLESS STEEL NEEDLE WITH SPRING STYLE METAL HANDLE AND GUIDE TUBE (L-TYPE), 10 NEEDLES WITH 1 GUIDE TUBE PER PACK NEEDLE ACUPUNCTURE, GENERAL USE, 0.30MM DIAMETER BY 60MM LENGTH, STAINLESS STEEL NEEDLE WITH SPRING STYLE METAL HANDLE AND GUIDE TUBE (L-TYPE), 10 NEEDLES WITH 1 GUIDE TUBE PER PACK NEEDLE ACUPUNCTURE, GENERAL USE, 0.25MM DIAMETER BY 60MM LENGTH, STAINLESS STEEL NEEDLE WITH SPRING STYLE METAL HANDLE AND GUIDE TUBE (L-TYPE), 10 NEEDLES WITH 1 GUIDE TUBE PER PACK Evaluations for this product line will be done by a panel of experts as a technical review to determine which vendors meet the requirements. Vendors who provide all requested information and meet the requirements will be selected for inclusion on the QSL. Vendors will be notified of whether they met or did not meet the QSL requirements by approximately 01 August 2024. RESPONSE INFORMATION: Responses to this QSL Announcement must be submitted via email to the MMESO Clinical Analyst, MMESO Team Lead, and DLA KO listed below. Vendor questions regarding this QSL Announcement are due no later than 5:00 pm local Philadelphia time 2 business days before solicitation closes. Vendor responses to this QSL Announcement are due no later than 5:00 pm local Philadelphia time on 23 May 2024. All vendor correspondence should be emailed to all of the following: Dr. Jim Quinn, Senior Clinical Analyst Lead MMESO DHA Clinical Analyst Contractor MMESO Clinical Analyst james.e.quinn28.ctr@health.mil Mr. Moises Soto Lead MMESO DHA Team Leader Contractor MMESO Team Lead Moises.Soto1.CTR@Health.mil Ms. Tara Perrien DLA Troop Support Medical Contracting Officer tara.perrien@dla.mil The Contracting Officer will address any issues/questions pertaining to Incentive Agreements, TAA questions, and extension requests.
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/58d8e4b9fc0342c385524163cb286f46/view)
 

Place of Performance

Address: Frederick, MD 21702, USA

Zip Code: 21702

Country: USA
 

Record

SN07059116-F 20240511/240509230049 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |