SOURCES SOUGHT
99 -- Indefinite Delivery / Indefinite Quantity (IDIQ) Contract for Architect-Engineer (A-E) Mechanical/Electrical/Plumbing (MEP) Services Primarily Located in the Marine Corps AOR
- Notice Date
- 4/30/2024 1:28:38 PM
- Notice Type
- Sources Sought
- NAICS
- 541330
— Engineering Services
- Contracting Office
- NAVFACSYSCOM MID-ATLANTIC NORFOLK VA 23511-0395 USA
- ZIP Code
- 23511-0395
- Solicitation Number
- N4008524R2674
- Response Due
- 5/14/2024 11:00:00 AM
- Archive Date
- 05/29/2024
- Point of Contact
- Brittany Cristelli, Phone: 7573411978
- E-Mail Address
-
brittany.cristelli@navy.mil
(brittany.cristelli@navy.mil)
- Description
- THIS IS A SOURCES SOUGHT NOTICE FOR MARKET RESEARCH PURPOSES, ONLY. IT IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT COMMIT THE GOVERNMENT TO ISSUE ANY TYPE OF SOLICITATION OR AWARD AN ULTIMATE CONTRACT AND DOES NOT RESTRICT THE GOVERNMENT FROM A PARTICULAR ACQUISITION APPROACH. The Naval Facilities Engineering Command, Mid-Atlantic is seeking eligible small business Architect-Engineer (A-E) Multi-Discipline Engineering firms capable of performing Indefinite Delivery /Indefinite Quantity Architect-Engineer (A-E) Multi-Discipline Engineering Services as required for construction, repair, replacement, demolition, alteration, improvements, and Maintenance Execution Projects. These services will be procured in accordance with 40 United States Code (USC) Chapter 11, Selection of Architects and Engineers, Federal Acquisition Regulation (FAR) Subpart 36.6.� Work under the contract is anticipated to occur primarily in the Marine Corps Area of Responsibility (AOR) including, Marine Corps Air Station (MCAS) Cherry Point, MCAS New River, Marine Corps Base (MCB) Camp Lejeune, MCAS Beaufort, and Marine Corps Recruit Depot (MCRD) Parris Island. Most projects will be new, repair, replacement, upgrade, maintenance, energy savings and/or sustainability projects covering the full range of the field of architecture and engineering for a wide variety of new and existing facilities and/or systems, utilities, and infrastructure. The projects will include delivery of both Design-Build and Design-Bid-Build project design as well as AE-specific study/evaluation work.� Prospective A-E firms, will primarily perform mechanical, and electrical design services under the contract, however, the following types of A-E services, that require multiple engineering design disciplines, may be required under this contract: � Planning Services, including the development of project programming document ����� (DD 1391), evaluations, site investigations, and cost estimation such as: 1)�� Facility planning services, including: Project programming and requirements development Conceptual pricing development Development of Alternatives including Economic Analysis�������� 2)�� Facility analysis, including: General condition assessment including code compliance Energy utilization studies Facility life safety code analysis Hazardous material surveys and analysis 3)�� Site investigation services, including: Geotechnical investigation Utility location/identification Site topographic and property boundary studies, including flood zones and wetlands Environmental soil and ground water sampling and analysis Storm Drainage analysis/studies B)� Facility Analysis, including:� General condition including code compliance. Energy utilization studies. Concept and site sketches. Recommendations on potential utilities impact. Identification of sustainable features. Facility Life Safety Code Analysis. Studies, evaluations and testing with associated work. Site Utility surveys. C)� Design Services & Deliverables, including all supporting activities such as site investigation, surveys (to include hazardous material testing), design charrettes, cost estimates, etc.: 1)�� Development of design-build RFP packages including schematic concept drawings and environmental studies 2)�� Development of comprehensive design-bid-build packages that include full plans and specifications 3)�� Construction Cost Estimates 4)�� Calculations D)�� Mechanical / Electrical Design Services in the following areas: Energy Supply (oil, gas, steam, hot or chilled water supply. Heat generating systems (boilers, primary pumps, auxiliary equipment, etc.). Cooling generating systems (chillers, cooling towers, primary pumps, condensing units,���������� split system heat pump-outdoor units, etc.) Distribution Systems (AHUs, FCUs, VAV systems, fans exhaust fans, supply fans, heat exchangers, pumps, convectors, duct heaters, etc.) Terminal and Package Units (PTACs, PTHPs, WSHPs, Package/Rooftop Air Conditioners and Heat Pumps, Furnaces, etc.) Controls (DDC, stand-alone controllers, etc.) System Testing & Balancing (piping and air system testing and balancing). High voltage and low voltage electrical systems. Specialized services for telecommunications (telephone, television, fiber optics, cyber security, � ���������� Supervisory Control and Data Acquisition (SCADA) control system, and Local Area Network ���������� (LAN)), physical security, audio-visual and collateral equipment may be required ��� E)���� Construction Services such as the following services: 1)�� Contractor submittal reviews 2)�� Field consultation and special inspections 3)�� Electronic Operation and Maintenance Support Information (eOMSI) 4)�� Obtaining environmental permits and regulatory approvals 5)�� As-built and Record Document preparation AE firms are required to prepare cost estimates utilizing the MCACES MII estimating system, specifications in the SPECSINTACT program, design-build RFPs utilizing NAVFAC Design-Build Masters, and drawings in AutoCAD (2020 or higher) or Revit (2020 or higher) utilizing the National CADD Standards format with NAVFAC specified modifications.� 3D renderings and BIM modeling may also be required.� A-E firms or others under contract or providing services to NAVFAC may request software installation packages from NAVFAC Atlantic CI Cost.� The firm is to send an email to NAVFAC-CI-Cost@navy.mil with the following in the Subject Section ""MII License Request"". Software is generally distributed to design firms free of charge; however, accompanying database licenses must be purchased and licensed as appropriate by the user. Asbestos and or lead-based paint assessments will be required on this contract to determine the presence of hazardous material in existing facilities or at utility points of connections.� When asbestos or lead is found, comprehensive asbestos or lead surveys, to include sampling and testing, and the preparation of plans and specifications showing the location of asbestos and lead and specifying the procedure to be followed during construction and/or demolition for removal or abatement, will be required. AE firms must be able to accept work that involves asbestos, lead paint, PCBs, contaminated groundwater/soil and other hazardous materials, work on airfields, and in confined spaces.�� All design services shall comply with the most current edition of FC 1-300-09N Navy & Marine Corps Design Procedures, and other requirements as indicated on the Whole Building Design Guide Web Site (www.wbdg.org).� �� The target award for this IDIQ contract is anticipated to be $60,000,000.� All service-disabled Veteran-owed small businesses, certified HUB-Zone small businesses, and certified 8(a) small businesses are encouraged to respond.� Upon review of industry response to the Sources Sought Synopsis, the Government will determine whether a set-aside acquisition in lieu of full and open competition is in the Government's best interest.� This office anticipates award of a contract for these services to be August 2024. The appropriate NAICS Code is 541330, Engineering Services, and the small business size classification for this procurement is $25,500,000.�� THIS IS NOT A REQUEST FOR PROPOSALS. This Sources Sought notice is a market research tool used to determine the availability and adequacy of potential small business sources prior to determining the method of acquisition and issuance of an award. The Government is not obligated to and will not pay for any information received from potential sources as a result of this Sources Sought notice. �� It is requested that interested small businesses submit to the Contracting Office a brief capabilities statement package (no more than 25 pages in length, single-spaced, 12-point font minimum including document searchable bookmarks) demonstrating your ability to perform the requested services.� Please use the attached Project Information Form for each project submitted demonstrating the requisite experience.� The Sources Sought Project Information Form shall be used to document a minimum of three (3) and up to a maximum of five (5) relevant design projects completed in the past seven (7) years that best demonstrate your experience on projects that are similar in size, scope and complexity to the projects proposed for this IDIQ.� This documentation shall address, at a minimum, the following: 1.��� Relevant Experience:� Relevant Experience to include experience in performing efforts of similar scope and complexity within the last five years, including contract number, indication of whether a prime or subcontractor, contract value, Government/Agency point of contact and current telephone number, and a brief description of how the contract referenced relates to the technical services described herein.� The relevant experience project submitted is defined as and shall include the following attributes: ����� A. Size:� Design of a construction projects with an estimated construction costs ranging from $500,000 to $5,000,000. ���� �B. Scope/Complexity:� Projects, cumulatively and collectively, shall demonstrate design experience with the following: Planning, project programming and requirements development. Conceptual pricing development, and development of alternatives including economic analysis. Facility analysis, such as general condition assessment including code compliance, energy utilization studies and facility life safety code analysis. Hazardous material surveys and analysis. � Design services and deliverables, including development of comprehensive contract packages such as Design-Build RFPs and Design-Bid-Build drawings, specifications, and construction cost estimates. Construction services such as contractor submittal reviews, field consultation and special inspections, electronic operation, and maintenance support information (eOMSI), obtaining environmental permits and regulatory approvals, and preparation of as-built documents. C. Characteristics:� Additionally, submitted relevant design projects shall demonstrate the following characteristics: Offerors shall have acted as the Designer of Record (DOR) on submitted projects. Experience with design of both new construction (at least one (1) project) and renovation (at least one (1) project) Experience with the preparation of a solicitation package for design-build request for proposal (at least one (1) project). Experience with the preparation of a solicitation package for design-bid-build/full design (at least one (1) project). Offeror�s experience performing as a subcontractor will not be considered, nor will experience of companies proposed to work as subcontractors on the resulting solicitation/contract. Ensure that the project description clearly identifies whether or not the project is new construction or renovation, provides the final construction cost, and addresses how the project meets the scope/complexity requirements. Please provide a company profile utilizing the attached Contractor Information Form. Respondents to this Sources Sought are asked to populate this form with the number of employees, office locations(s), UEI # (Unique Entity ID), CAGE Code, and statement regarding small business designation and status.�� RESPONSES ARE DUE NOT LATER THAN 14 MAY 2024 AT 2:00 PM EDT. LATE RESPONSES WILL NOT BE ACCEPTED.�� The package shall be sent by email to the Contract Specialist, Ms. Brittany Cristelli, at brittany.n.cristelli.civ@us.navy.mil All questions or comments regarding this notice must be e-mailed to the Contract Specialist, otherwise the government will not respond. ��
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/c6ab1682daa9401e8318c3605e0fc82d/view)
- Place of Performance
- Address: Cherry Point, NC, USA
- Country: USA
- Country: USA
- Record
- SN07047574-F 20240502/240430230102 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |