SOURCES SOUGHT
J -- Stanley/Allegion Door Inspection & Repair
- Notice Date
- 4/17/2024 11:01:34 AM
- Notice Type
- Sources Sought
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- 246-NETWORK CONTRACTING OFFICE 6 (36C246) HAMPTON VA 23667 USA
- ZIP Code
- 23667
- Solicitation Number
- 36C24624Q0731
- Response Due
- 4/19/2024 9:00:00 AM
- Archive Date
- 04/24/2024
- Point of Contact
- Satasha Stewart, Contract Specialist, Phone: 757-251-4136
- E-Mail Address
-
Satasha.Stewart@va.gov
(Satasha.Stewart@va.gov)
- Awardee
- null
- Description
- The Central VA Health Care System in Richmond, VA, is seeking potential sources to provide Stanley/Allegion Door Inspection and Repair services. Scope: Inspect equipment for any visible damage or wear determine cause and record. Check and Inspect hanger wheels, track/cap. Adjust or replace as necessary Check all locking systems security clips, solenoid lock, key cylinders. Lubricate, adjust/ replace. Inspect floor track, clean, and sweep out as required. Note excessive wear and determine reason Check and Inspect bottom guides. If excessive wear, determine reason Inspect safety decals. Must meet ANSI codes. Install/Replace as necessary. Check breakout force. Adjust as required to meet ANSI codes as applicable. Check door closing force. Adjust and lubricate ball detents and SO panel pivots as necessary. Check drive belt. Clean and adjust tension as necessary. Inspect wiring tie wrap if loose Check motor/gearbox for wear/excessive noise. Replace as needed Check and adjust operational speeds not to exceed ANSI 156.10 or applicable code. Check and adjust threshold sensors/safety beams must meet ANSI 156.10 or applicable code. Check and adjust motion sensor range to meet ANSI code. Verify time delay note any problems. Collect current cycle counts. Also covers emergency service when there s a life safety or security issue that must be addressed immediately. Warranty for life of contract to cover equipment is required and must meet specifics for the automatic doors. Qty Manufacturer Coverage 9.0 Stanley Swing Operator LE - Single Parts and Labor (SATPMPL) 33.0 Stanley Swing Operator LE - Dual Parts and Labor (SATPMPL) 1.0 Stanley Swing Operator - Single Parts and Labor (SATPMPL) 17.0 Stanley Swing Operator - Dual Parts and Labor (SATPMPL) 45.0 Stanley Slider Dual (Bi-Part) Parts and Labor (SATPMPL) The NAICS code for this procurement is 811310 Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance and the Size Standard is $12.5 Million. Period of Performance is One base year and four option years (five years total). Responses to this Sources Sought notice should include the following: name and address of company, business size (large or small): Please identify your company s socioeconomic categories-8(a), HUBZone, Services Disabled Veteran-Owned/Veteran-Owned Small Business, Other Small, Small, or Large. If you are an SDVOSB, VOSB or small business and plan on subcontracting, please provide a plan to show how your company will provide 51% of the work being performed. Also, provide a brief description of qualifications and any other pertinent information which demonstrates the ability to meet the above requirement. Subject line must reflect: Stanley/Allegion Door Inspection and Maintenance All capability statements shall be submitted in writing no later than 12:00 PM, 4/19/24, to the attention of: Satasha Stewart Satasha.Stewart@va.gov Please do not reply if your company is not capable or interested. Thank you.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/877f38b9ff56493d8c19f39f0a01d9f1/view)
- Record
- SN07034225-F 20240419/240417230104 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |