SOURCES SOUGHT
65 -- DEPUY SYNTHES CANNULATED SCREWS (VALLHS)
- Notice Date
- 3/25/2024 9:05:32 AM
- Notice Type
- Sources Sought
- NAICS
- 339112
— Surgical and Medical Instrument Manufacturing
- Contracting Office
- 262-NETWORK CONTRACT OFFICE 22 (36C262) Gilbert AZ 85297 USA
- ZIP Code
- 85297
- Solicitation Number
- 36C26224Q0882
- Response Due
- 4/1/2024 9:00:00 AM
- Archive Date
- 05/01/2024
- Point of Contact
- Jonathan C. Ford, Contract Specialist, Phone: -
- E-Mail Address
-
Jonathan.Ford1@va.gov
(Jonathan.Ford1@va.gov)
- Awardee
- null
- Description
- SOURCES SOUGHT SYNOPSIS ONLY This request for information (RFI) and sources sought is issued solely for information and planning purposes only and does not constitute a solicitation. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. The submission of pricing, capabilities for planning purposes, and other market information is highly encouraged and allowed under this RFI in accordance with FAR 15.201(e). The purpose of this sources sought/RFI is to gain knowledge of potential qualified sources, their socioeconomic status, and their size classification relative to NAICS 339112 Surgical and Medical Instrument Manufacturing, size standard of 1000 employees. Responses to this sources sought will be used by the Government to make appropriate acquisition decisions. This synopsis is neither a request for competitive proposal nor a solicitation of offers. This synopsis is to assist the VA in determining sources only and a solicitation is not currently available. If a solicitation is issued it shall be announced at a later date, and all interested parties must respond to that solicitation announcement separately from responses to this RFI and sources sought. The Department of Veterans Affairs Veterans Integrated Service Network (VISN) 22 is seeking potential sources capable of supplying Depuy Synthes Cannulated Screws at the VA Loma Linda. They are part of Orthopedic implant tray an all-in-one implant system to correct hip and lower extremity fractures These procedures help restore the function of Veterans mobility and activities of daily living. Additionally, Depuy 13MM Washers also are needed. The proposed action is for a fixed price, short-term contract. The Government contemplates issuing one (1) solicitation for these services to be provided to the following facilities: VA Loma Linda Healthcare System 11201 Benton Street Loma Linda, CA 92357 Contractor shall provide the following information: Vendor: Address: Telephone Number: Business Size: Socioeconomic Category (i.e. SDVOSB, 8a, VOSB, etc.): Duns Number: Responses to this sources sought are not request to be added to a prospective bidders list or to receive a copy of the solicitation. Information received as a result of this notice will normally be considered solely for the purpose of determining whether conduct a competitive procurement. This notice does not represent a commitment by the Government to pay for cost incurred in the preparation and submission of information or any other cost incurred as a response to this announcement. Inquiries will only be accepted in writing via email to Jonathan.Ford1@va.gov telephone responses shall not be accepted. Please respond by April 1, 2024 at 9:00am PT. Note* The Non-Manufacturer Rule (NMR) in accordance with 13 CFR ยง 121.406, September 4, 2019 applies to this acquisition. a) For small business set-asides other than construction or service contracts the prime contractor that s supplying products to the government is required to cover at least 50 percent of the cost of manufacturing those products. The non-manufacturer rule is an exception to that requirement. The rule allows a small business to supply products it did not manufacture as long as those products come from another small business. b) A manufacturer is defined as a business that, with its own facilities, performs primary activities in transforming inorganic or organic substances, including the assembly of parts and components, into the end product being acquired. In other words, a manufacturer makes or produces products. Businesses may qualify as a non-manufacturer if it meets the following criteria: Does not exceed 500 employees Is primarily engaged in the retail or wholesale trade and normally sells the type of products being supplied Will supply the end products of a small business manufacturer or processor made in the United States, or obtains a waiver of such requirement See Title 13 Part 121.406 of the Code of Federal Regulations (CFR) for detailed information about the non-manufacturer rule. The Following below is a description of type of the Brand Name Cannulated Screws from Depuy Synthesis and Additionally a 13.00MM Washer: 6.5MM CANNULATED SCREW 16MM THREAD 30MM 150MM 7.3MM CANNULATED SCREW 16MM THREAD/30MM 150MM DEPUY SYNTHESIS WASHER 13.0MM
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/9cea42f2858c467483a8d9841d624d5a/view)
- Place of Performance
- Address: VA Loma Linda Healthcare System 11201 Benton Street, Loma Linda 92357, USA
- Zip Code: 92357
- Country: USA
- Zip Code: 92357
- Record
- SN07008388-F 20240327/240325230056 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |