SOLICITATION NOTICE
36 -- Water Jet Cutter
- Notice Date
- 3/11/2024 1:15:55 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333248
—
- Contracting Office
- FA4419 97 CONF CC ALTUS AFB OK 73523-5002 USA
- ZIP Code
- 73523-5002
- Solicitation Number
- FA441924Q0028
- Response Due
- 3/22/2024 11:00:00 AM
- Archive Date
- 04/06/2024
- Point of Contact
- Andres Lugo, Phone: 5804815829, Joshua Dunrud, Phone: 5804817234
- E-Mail Address
-
andres.lugo@us.af.mil, joshua.dunrud@us.af.mil
(andres.lugo@us.af.mil, joshua.dunrud@us.af.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This requirement is to purchase a device to cut steel, aluminum, plexiglass, honeycomb, foam, composites etc. with a maximum thickness of 12 inches. The current methods of cutting thick materials are limited to a hand held circular saw which only has 3 inch capacity. � The water jet must have the following features: � - Must be 480 VAC/3 Phase system - Cutting pressure output of 60,000 PSI (Pounds per Square inch) - Maximum 50 Horsepower direct drive pump motor - Optimum .016� cutting orifice/1.20 GPM flow rate - Maximum foot print area of 15� 2� x 8� 10� - Cutting bed area 8�3� x 4�6� minimum - Maximum table load 400 Lbs. sq ft. - Maximum 180 in/min cutting speed - Noise level less than 80 dba at 1 meter for submerged cutting - Linear positional accuracy must be less than 0.0015� - Repeatability must be less than 0.0015� - Ballbar Circularity must be less than 0.003� - Minimum X and Y travel must be 8� 4� x 4� 7� - Minimum 7.5� Z axis travel - Must be capable of cutting alum, stainless steel, carbon steel, copper, titanium, tool steel, brass, carbon fiber, fiberglass, Kevlar, phenolic. - Five (5) Day Training included - The factory technician will start the machine to assure it's operation, immediately following start-up the technician will provide 3 Days on-site Training. - Installation of electrical components - Installation of plumbing services for the waterline�
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/7e3e683ba26c4db193757a84000962d2/view)
- Place of Performance
- Address: Altus AFB, OK 73523, USA
- Zip Code: 73523
- Country: USA
- Zip Code: 73523
- Record
- SN06992594-F 20240313/240311230041 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |