SOURCES SOUGHT
J -- Layshaft Laser Alignment for Dredge McFarland
- Notice Date
- 12/21/2023 8:28:33 AM
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- W2SD ENDIST PHILADELPHIA PHILADELPHIA PA 19103-0000 USA
- ZIP Code
- 19103-0000
- Solicitation Number
- W912BU-24-R-0012
- Response Due
- 1/12/2024 12:00:00 PM
- Archive Date
- 01/27/2024
- Point of Contact
- Amanda Bellnier, Gregory C. Keaton, Phone: 2156563826
- E-Mail Address
-
amanda.bellnier@usace.army.mil, gregory.c.keaton@usace.army.mil
(amanda.bellnier@usace.army.mil, gregory.c.keaton@usace.army.mil)
- Description
- Sources Sought Announcement: Solicitation:� �#W912BU-24-R-0012 Procurement Type: Sources Sought Title:� Layshaft Laser Alignment Readings Classification Code: J020 � Maintenance, Repair, and Rebuilding of Equipment � Ship and Marine Equipment NAICS Code: 336611 � Ship Building and Repairing Response Date:���������������������������������������������������������������������� ����������� Primary Point of Contact: 12 January 2024 �������������������������������������������������������� ����������� ����������� Amanda Bellnier Description: This is a Sources Sought Notice and is for INFORMATION PURPOSES ONLY.� This IS NOT a REQUEST for PROPOSALS, QUOTATIONS, or BIDS.� Responses to this request will not be returned.� Not responding to this sources sought does not preclude participation in any future and potential solicitation.� It is the intent of the Contracting Office to use this information for market research purposes only.� The survey is being conducted to determine the interest of industry within NAICS code #336611, and establish that there are adequate Large and/or Small Business (HUBZONE 8(a) or Service Disabled Veteran Owned Small Business) contractors for providing Layshaft Laser Alignment Readings on the Dredge McFarland.� The Government WILL NOT pay for the provision of any information, nor will it compensate any respondents for the development of any such information.� If a formal solicitation is released, it will be via the Federal Business Opportunities (http:www.fbo.gov). The Philadelphia District of the Corps of Engineers intends to procure Layshaft Laser Alignment Readings on the Dredge McFarland during Fiscal Year 2024. The Government is issuing this Request for Information (RFI) to identify resources available to complete the required work.� INTENT The intent of this scope of work is to provide laser alignment readings of both the port and starboard side layshaft bearings, layshaft, drum bearings, motor driven gearbox, and drum shafts.� Physical bearing alignment and movement will not be performed under this contract.� HISTORY The starboard and port layshafts and drum shafts were aligned using a laser alignment procedure in May 2020.� The starboard and port final alignment reports from May 2020 will be made available with the solicitation. SCOPE OF WORK The contractor shall provide all necessary labor, material, services (including rigging), parts, tools, material and equipment to perform and complete the work in accordance with the following specifications in both the port and starboard winch rooms, forward and aft.� The Government will provide forklift and crane service as required. Laser alignment readings shall be taken while the vessel is moored at the Mooring Barge 2 located in Mifflin Range near the mouth of the Schuylkill River.� The Government will provide launch services to/from the Mooring Barge 2. � On each of the port side and stbd side winch rooms, there is one winch layshaft (comprised of 5 sections), 19 bearings, a motor driven gearbox, and three drum shafts. The port and starboard winch rooms are located on upper levels of the voids, outboard of the hopper.� The dragarm winch extends from approximately Frame 49 to Frame 87 (approximately 75 feet), and contains equipment servicing the trunnion elbow, ball joint, and draghead. Laser Alignment Readings Using laser alignment, verify the alignment of the entire port and starboard layshaft system (from trunnion to draghead), the three drum shafts, the gearbox and motor, and nineteen bearings, using the attached alignment reports from May 2020 as reference.� Verify the parallel and angular alignment of layshaft to drum shafts (both vertically and horizontally).� This procedure may require the removal of existing bearings caps. Any laser reading results requiring realignment of the drum shafts, and subsequent bull gear to the pinion gear, shall be reported to achieve maximum gear efficiency (95% is optimal). The requested period of performance is 14 days from the date of award. Longer lead times will be considered. The vendor shall identify earliest availability in their submission. All interested Large Business, Small Businesses, certified HUBZONE, 8A, Women-Owned Small Businesses, or Service-Disabled Veteran Owned Business contractors should respond to this survey by email on or before 12 January 2024 at 3:00pm EST. Responses should include: Identification of the company�s small business status. Contractor�s Unique Identifier Number and CAGE Code(s). Descriptions of Experience � Interested vendors must provide no more than (3) example projects completed in the past 5 years where the interested firm demonstrated capability of performing the required work.� Example projects must be of similar size and scope. Based on the information above, for each project submitted, include: Current percentage of project completion and the date it was or will be completed. Scope of the project. Size and dollar value of the project. Small Businesses are reminded under FAR 52.219-14, Limitations on Subcontracting; they must perform at least 50% of the cost of the contract with the firm�s own employees for a supply-type procurement.� Include the percentage of work that will be self-performed on this project, and how it will be accomplished. NOTE: Total submittal package shall be no longer than 5 pages.� Please only include a narrative of the requested information; additional information will not be reviewed. Responses should be submitted electronically via e-mail to: Amanda Bellnier Contract Specialist Amanda.bellnier@usace.army.mil
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/23ea227b819941548d603b05ca50a4b4/view)
- Record
- SN06920335-F 20231223/231221230051 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |