SOLICITATION NOTICE
10 -- Synopsis: IDC for CL23177001
- Notice Date
- 12/6/2023 12:58:37 PM
- Notice Type
- Presolicitation
- NAICS
- 332994
— Small Arms, Ordnance, and Ordnance Accessories Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7LX24RX014
- Response Due
- 1/10/2024 2:00:00 PM
- Archive Date
- 01/25/2024
- Point of Contact
- SARAH SCHAFF, Phone: 3802457698
- E-Mail Address
-
SARAH.SCHAFF@DLA.MIL
(SARAH.SCHAFF@DLA.MIL)
- Description
- Quotes are due prior to the Closing Date and Time specified on page 1 of the Solicitation / Request for Quote (RFQ). The solicitation will be available in DIBBS (http://www.dibbs.bsm.dla.mil) on or about its estimated issue date of 12/08/2023. Due to system constraints, it may take as long as three business days from the stated issue date for the solicitation to post to DIBBS. Solicitation is for a long term (up to 5 years) Indefinite Delivery Contract (IDC) issued under FAT Part 13.5 Simplified Procedures for Certain Commercial Items. Description:� NSN: 1005011346737 Item Description: Piston, Gun Gas Cyli. Unit of Issue: EACH Drawing Number: CAGE 19200, Part Number 9348405 Drawings/Specifications will be available through the DIBBS solicitation link on the solicitation issue date. Qualification Requirements:� Interested parties may obtain copies of Military and Federal Specifications and Standards, Qualified Product Lists, Military Handbooks, and other standardization documents from the DoD Single Stock Point (DODSSP), in Philadelphia, PA. Most documents are available in Adobe PDF format from the ASSIST database via the Internet at http://assist.daps.dla.mil/. Users may search for documents using the ASSIST-Quick Search and, in most cases, download the documents directly via the Internet using standard browser software. � � Documents not available for downloading from ASSIST can be ordered from the DODSSP using the ASSIST Shopping Wizard, after establishing a DODSSP Customer Account by following the registration procedures or by phoning the DoDSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257). Users not having access to the Internet may contact the DODSSP Special Assistance Desk at (215) 697-6396/6257 (DSN: 442-6396/6257) or mail requests to the DODSSP, Bldg. 4/D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Patterns, Drawings, Deviations Lists, Purchase Descriptions, etc., are not stocked at the DODSSP. � �� � � �REFERENCE NUMBER RQ016 � � �RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS � � �LISTS (QML). �THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A � � �SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR � � �QUALIFIED MANUFACTURERS LIST (QML). �QUALIFICATION REQUIREMENTS IN � � �PROCUREMENT NOTE H02 ""COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED � � �MANUFACTURERS LIST (QML)"" APPLY. Award will be made only if the offeror, the product, or the manufacturer meets qualification requirements at time of award, in accordance with FAR clause 52.209-1 or 52.209-2. The solicitation identifies the office where additional information can be obtained concerning qualification requirements and is cited in each individual solicitation. Exception Data:� _______________EXCEPTION DATA____________________ � � �IF DRAWING NOTE GIVES OPTION FOR ZINC OR MANGANESE COATING THEN � � �MANGANESE IS REQUIRED. � � �ALL DRAWINGS: � � �THE REVISIONS OF THE SPECIFICATIONS LISTED IN NOTE 1 ARE REQUIRED TO � � �PROPERLY INTERPRET THE DRAWING REQUIREMENTS. THE USE OF OTHER OR MORE � � �CURRENT REVISIONS FOR THESE IS NOT AUTHORIZED. � � �DWGS 12556960, 9348407: � � �IN NOTE 2: CHANGE FROM �DIN 17 222� TO �DIN EN 10132�. � � �DWG 9348406: � � �IN NOTE 2: CHANGE �A331� TO �A108�. � � �DWG 9348408: � � �IN NOTE 6B: DRAWING 12479550, GROUND COMBET VEHICLE WELD CODE APPLIES AS � � �REPLACEMENTS DO NOT ADEQUATELY ADDRESS REQUIREMENTS OF WELDS IN THIS � � �APPLICATION. � � �TDPL 9348405: � � �DELETE: � � �MIL-DTL-13924 � � �MIL-DTL-53072 � � �MIL-STD-3040 � � �ASME-Y14.5 � � �ASTM-B633 � � �SAE-AMS-QQ-P-416 � � �SAE-AMS2175 � � �13027484 � � �ADD: � � �ASME-Y14.5M � � �______________END OF EXCEPTIONS__________________ Critical Application Item:� CRITICAL APPLICATION ITEM � � �IAW BASIC DRAWING NR 19200 9348405 � � �REVISION NR E � DTD 11/10/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 12579607 � � �REVISION NR C � DTD 08/04/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE SPEC NR MIL-DTL-16232H(1) � � �REVISION NR 1 � DTD 03/26/2021 � � �PART PIECE NUMBER: � � �IAW REFERENCE UNK DI-NDTI-80809B NOT 2 � � �REVISION NR B � DTD 12/11/2019 � � �PART PIECE NUMBER: � � �IAW REFERENCE UNK QPL-3150-34 NOT 1 � � �REVISION NR 34 �DTD 03/15/2007 � � �PART PIECE NUMBER: � � �IAW REFERENCE UNK QPL-16173-84 NOT 1 � � �REVISION NR 84 �DTD 10/29/2008 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 13027484 � � �REVISION NR C � DTD 03/31/2020 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 12556960 � � �REVISION NR E � DTD 11/10/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 9348406 � � �REVISION NR J � DTD 06/04/2012 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 9348407 � � �REVISION NR F � DTD 11/10/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 9348408 � � �REVISION NR N � DTD 04/08/2022 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 9348409 � � �REVISION NR K � DTD 01/19/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 9348410 � � �REVISION NR F � DTD 12/30/2008 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 9348411 � � �REVISION NR G � DTD 10/07/2019 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 9348405 � � �REVISION NR � � DTD 06/27/2023 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 9348405 � � �REVISION NR D � DTD 08/09/2023 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 9348405 � � �REVISION NR E � DTD 11/10/2009 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19200 12993884 � � �REVISION NR K � DTD 04/23/2020 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 19207 12479550 � � �REVISION NR C � DTD 05/17/2017 � � �PART PIECE NUMBER: First Article Test (FAT) will be required:� THE ITEM BEING PROCURED IS A CRITICAL GUN PART ITEM WITH UNIQUE � � ��� �REQUIREMENTS. � � ��� �CONTRACTOR FAT APPLIES. Indefinite Quantities for Delivery Orders: Estimate Annual Quantity is 1,503 EA. Destination information: Various DLA Stock Locations. Delivery Schedule: 270 Days. All responsible sources may submit a quote which shall be considered. The solicitation document contains information that has been designated as �Militarily Critical Technical Data.� Only businesses that have been certified by the Department of Defense, United States / Canada Joint Certification Office, and have a valid requirement may have a copy of the solicitation document. All request for copies of the solicitation document must include a certified copy of DD Form 2345, Militarily Critical Technical Data Agreement. To obtain certification, contact: Commander, Defense Logistics Information Service (DLIS), ATTN: U.S./Canada Joint Certification Office, 74 Washington Avenue North, Battle Creed, MI 49017-3084 or call the DLIS at (800)352-3572. The DLIS United States/Canada Joint Certification Lookup Service is available via the Internet at http://www.dlis.dla/mil/ccal/. �� � �� �RQ032: EXPORT CONTROL OF TECHNICAL DATA �� � �� �This item has technical data some or all of which is subject to export-control of either the� International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR)� and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. The Small Business Size Standard is 1,000 employees. The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government. The total duration (base plus option years) shall not exceed 5 years. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, and other evaluation factors as described in the solicitation. �
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/5a8964c99a2a47ed8def7423f2ad65f2/view)
- Record
- SN06904258-F 20231208/231206230046 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |