SOLICITATION NOTICE
Y -- Webster, New Hampshire � Blackwater Dam Concrete Repairs
- Notice Date
- 12/6/2023 8:09:35 AM
- Notice Type
- Presolicitation
- NAICS
- 237990
— Other Heavy and Civil Engineering Construction
- Contracting Office
- W2SD ENDIST NEW ENGLAND CONCORD MA 01742-2751 USA
- ZIP Code
- 01742-2751
- Solicitation Number
- W912WJ24B0003
- Response Due
- 1/31/2024 10:00:00 AM
- Archive Date
- 02/15/2024
- Point of Contact
- Natalie Allen, Phone: 9783188269, Erin E. Bradley, Phone: 9783188195
- E-Mail Address
-
natalie.m.allen@usace.army.mil, erin.e.bradley@usace.army.mil
(natalie.m.allen@usace.army.mil, erin.e.bradley@usace.army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The U.S. Army Corps of Engineers, New England District is issuing a set aside for certified small business contractors to Blackwater Dam Concrete Repairs project at Blackwater Dam, Webster, NH. The NAICS code for the work described below is 237990. The project is planned to be issued in January 2024 and will be set aside for Small Businesses.� The period of performance will be approximately 270 days.� The estimated magnitude of this project is between $500,000-$1,000,000. Blackwater Dam is located in the Town of Webster, New Hampshire, on the Blackwater River, 10 miles upstream of the confluence of the Blackwater River and Contoocook River.� It is located in central New Hampshire, about 15 miles north of the Town of Penacook, New Hampshire.� The dam consists of a rolled earth fill embankment and concrete non-overflow section, outlet works and an uncontrolled concrete ogee weir spillway.� Construction of the project began in the spring of 1940 and was completed in November 1941. Fiber Reinforced Plastic (FRP) liner was placed in 1964 which provided lining for the conduits, conduit entrances and discharge apron with a fiberglass cloth and epoxy resin. This lining was installed to provide a smooth surface in the conduits and to prevent further erosion and spalling of the concrete.� At various locations around and inside the conduits, this FRP liner has delaminated and broken off, some taking away the concrete surface that it adhered to since installed.� Scope of the repairs for Blackwater Dam includes: Inlet nosing at conduit entrances:� Remove deteriorated FRP liner, remove existing concrete to sound concrete (4� deep nominal), install rebar anchors and welded wire fabric reinforcing, and apply polymer modified concrete thick patch (4 nosing total). Flow control conduits (3 conduits): Remove deteriorated FRP surface liner on all surfaces of the conduits.� Apply 2� thick polymer concrete patch upon removal of existing concrete on all walls and floor surfaces.� As needed, patch only on spalled areas concrete at the ceiling surface upon removal of the liner. Spillway apron downstream of the conduit: Remove deteriorated FRP liners and apply, as needed, patch to spalled concrete surfaces. Work in the conduit area will require a phased temporary flow diversion structure to direct stream flow to a single open conduit while working on two that are kept dry during the low flow construction window.� Based on the construction window with historically the low water season for the year, the Government anticipates concrete removal for repair works inside the conduits by hydro-demolition with associated pumping and waste treatment self-contained mechanical units. At the non-overflow sections of the dam, work consists of removal of previously patched areas that are deteriorating and applying new polymer concrete patches to be followed by the application of penetrating sealer to the exposed concrete area.� In-water works will be conducted during low flow water period of Summer of 2024. Please note that this solicitation is set aside for certified small businesses. This is not a request for bids at this time; the solicitation requirements and contract documents which will include instructions for submission and the response date will be available on or about January 2024. Neither telephonic, mailed, nor faxed requests for hard copies of this solicitation will be accepted. The solicitation will only be available online; in order to view the solicitation, bidders must access the System for Award Management website (www.sam.gov). In order to respond to the solicitation, bidders must access the Procurement Integrated Enterprise Environment (https://piee.eb.mil/). All responsible sources may submit a bid which shall be considered by the USACE New England District. Additional questions may be emailed to the Contract Specialist at natalie.m.allen@usace.army.mil.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/11411cc98ce7401abcbd42f810bfa858/view)
- Place of Performance
- Address: Webster, NH 03303, USA
- Zip Code: 03303
- Country: USA
- Zip Code: 03303
- Record
- SN06904220-F 20231208/231206230045 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |