Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
SAMDAILY.US - ISSUE OF NOVEMBER 26, 2023 SAM #8034
SOLICITATION NOTICE

99 -- 99--CUSHION ASSY, LID

Notice Date
11/24/2023 3:49:32 AM
 
Notice Type
Solicitation
 
NAICS
333998 —
 
Contracting Office
NAVSUP WEAPON SYSTEMS SUPPORT PHILADELPHIA PA 19111-5098 USA
 
ZIP Code
19111-5098
 
Solicitation Number
N0038324QF160
 
Response Due
12/26/2023 12:30:00 PM
 
Archive Date
01/10/2024
 
Point of Contact
Telephone: 2156976566
 
E-Mail Address
DANIELLE.CUTRERA@NAVY.MIL
(DANIELLE.CUTRERA@NAVY.MIL)
 
Description
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and Receiving Report combo||HQ0337|N00383|S0701A|SW3113|See Schedule|TBD||||||||| This is a sole source requirement. The Government physically does not have in its possession sufficient, accurate, or legible data to contract with other than the current source. These items require Government Source Approval prior to award. If you are not an approved source, you must submit, together with your proposal, the information detailed in the NAVSUP WSS Source Approval Brochure which can be obtained on the internet at https://www.navsup.navy.mil/navsup/ourteam/navsupwss/business_opps . Offers received which fail to provide all data required by the source approval brochure will not be considered for award under this solicitation. For information or questions regarding this notice, please contact Danielle Cutrera at the email address: Danielle.cutrera@navy.mil. This contract/delivery order/purchase order/modification is issued by the Government when deposited in the mail, transmitted by facsimile or sent by any electronic commerce method, including email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to issue this contract/delivery order/purchase order/modification. \ 1. SCOPE 1.1 Container shell material is ;Polyethylene Cross-linked 2# PCF; . 1.2 When discrepancies exist between these requirements and those on current manufacturer's drawings,contact code ;Buyer on Page One; or code N241.10 1.3 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;Hardigg-Pelican; drawing number ( ;11214; ) ;9683-24A; , Revision ;latest; and all details and specifications referenced therein. 1.4 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.5 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C. 2. APPLICABLE DOCUMENTS DRAWING DATA=9683-24A |11214| | |D| | | | 3. REQUIREMENTS Cuchions Shall be Bagged and Labeled with part number IAW MIL-STD-130. Lid cushion is an assembly per drawing 4. QUALITY ASSURANCE Cushions to be manufactured and inspected in accordance with the drawings. Inspection and acceptance is IAW drawings and sub-drawings for 9683-24A. 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES - NOT APPLICABLE 1. SCOPE 1.1 Container shell material is ;polyethylene cross-linked 2pcf foam; . 1.2 When discrepancies exist between these requirements and those on current manufacturer's drawings,contact code ;Buyer on Page One; or code N241.10 1.3 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;Hardigg-Pelican; drawing number ( ;11214; ) ;9683-13A; , Revision ;latest; and all details and specifications referenced therein. 1.4 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.5 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C. 2. APPLICABLE DOCUMENTS DRAWING DATA=9683-13A |11214| | |D| | | | 3. REQUIREMENTS Cushions to be bagged and labeled IAW MIL-STD-130. Cushion to be manufactured and inspected in accordance with the drawings. 4. QUALITY ASSURANCE Inspection and acceptance is IAW drawings and subdrawings for 9683-13A 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES - NOT APPLICABLE
 
Web Link
SAM.gov Permalink
(https://sam.gov/opp/c3d157159e1f4cb18e52567c26d0ed5e/view)
 
Record
SN06893791-F 20231126/231124230042 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.