Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF NOVEMBER 11, 2023 SAM #8019
MODIFICATION

47 -- HOSE ASSEMBLY, STEAM, 2""

Notice Date

11/9/2023 6:12:09 AM
 

Notice Type

Solicitation
 

NAICS

326220 — Rubber and Plastics Hoses and Belting Manufacturing
 

Contracting Office

DLA MARITIME - NORFOLK PORTSMOUTH VA 23709-5000 USA
 

ZIP Code

23709-5000
 

Solicitation Number

N4215832766032
 

Response Due

11/21/2023 10:00:00 AM
 

Archive Date

12/06/2023
 

Point of Contact

Sheree McDonnell, Phone: 7573759313
 

E-Mail Address

sheree.mcdonnell@dla.mil
(sheree.mcdonnell@dla.mil)
 

Small Business Set-Aside

SBA Total Small Business Set-Aside (FAR 19.5)
 

Description

HOSE ASSEMBLY, STEAM, 2"" 2"" INSIDE DIAMETER x 2.625"" OUTSIDE DIAMETER x 25 FEET LONG* (+/- 12"" length tolerance prior to attachment of end fittings) � TEMPERATURE RATING TO BE 450 DEGREE FAHRENHEIT � MINIMUM OPERATING PRESSURE TO BE 250.0 POUNDS PER SQ. INCH � BURST TEST PRESSURE TO BE 2500.0 POUNDS PER SQ. INCH � INNER CONVEYING TUBE MATERIAL TO BE EITHER BUTYL, CHLOROBUTYL, BROMOBUTYL, OR ETHYLENE-PROPYLENE-DIENE-TERPOLYMER. � INSIDE SURFACE CONDITION TO BE SMOOTH � OUTER COVERING ENVIRONMENTAL PROTECTION TO BE ABRASION, OZONE AND STEAM RESISTANT � FIRST LAYER TO BE BRAIDED STEEL WIRE � SECOND LAYER TO BE MOLDED RUBBER � THIRD LAYER TO BE BRAIDED STEEL WIRE � OUTER LAYER TO BE MOLDED RUBBER 2 � STAINLESS STEEL LINER TO BE 1.75"" INSIDE DIAMETER x 0.015"" THICK. THE METAL LINER SHALL BE TYPE 302, 304, 316, OR 321 STAINLESS STEEL. � STAINLESS STEEL LINER TO BE PERMINENTLY/MECHANICALLY ATTACHED TO HOSE END FITTINGS � EACH ASSEMBLY TO BE COUPLED, MALE x FEMALE BOSS AND SPUD WITH POLYMER SEAT. MALE BOSS AND POLYMER SPUD TO BE PERMANENTLY ASSEMBLED AND READY FOR USE. MALE END WILL BE A MNPT X HOSE STEM WITH A FEMALE SPUD ON THE END (DIXON MS26 AND B28). THE FEMALE END WILL BE A STEM WITH WING NUT (DIXON GB26 AND B27) � EACH COMPLETED HOSE ASSEMBLY SHALL BE HYDROSTATICALLY TESTED TO 250 PSI AND HELD FOR 10 MINUTES WITH ZERO LEAKS AND/OR BULGES ALLOWED. � SUPPLIER MUST PROVIDE WRITTEN CERTIFICATION THAT HOSE ASSEMBLIES (HOSE AND FITTINGS) HAVE BEEN HYDROSTATICALLY TESTED TO 250 P.S.I. FOR 10 MINUTES WITH ZERO LEAKS AND/OR BULGES. A COPY OF THIS CERTIFICATION IS TO BE SENT TO CODE 135, BUILDING 276, AND A COPY IS TO BE SENT TO CODE 532 TO BE FILED WITH THE CONTRACT. � AT NO COST TO THE GOVERNMENT, NORFOLK NAVAL SHIPYARD RESERVES THE RIGHT TO REQUEST A SAMPLE ASSEMBLY FOR TESTING AND EVALUATION PURPOSES FROM ANY OR ALL OFFERORS DURING THE EVALUATION PROCESS. � EACH HOSE ASSEMBLY SHALL BE PERMANENTLY MARKED, AT A MINIMUM, WITH REQUISITION NUMBER, WORKING PRESSURE AND MANUFACTURER'S NAME. ATTACHING TAGS ARE NOT ACCEPTABLE � HOSES MUST BE PALLETIZED
 

Web Link

SAM.gov Permalink
(https://sam.gov/opp/265fe3fb6b0947d6be7cc9b1bdba64a1/view)
 

Place of Performance

Address: Portsmouth, VA 23709, USA

Zip Code: 23709

Country: USA
 

Record

SN06880526-F 20231111/231109230317 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |