SOURCES SOUGHT
61 -- 2 NSN SOURCES SOUGHT
- Notice Date
- 7/12/2023 10:44:37 AM
- Notice Type
- Sources Sought
- NAICS
- 335910
—
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7LX23RX077
- Response Due
- 7/24/2023 8:59:00 AM
- Archive Date
- 08/08/2023
- Point of Contact
- Scott D. Knowles, Phone: 6146920639
- E-Mail Address
-
scott.knowles@dla.mil
(scott.knowles@dla.mil)
- Description
- ***Sources Sought*** This is not a request for either a quote or proposal. This announcement is considered market research in accordance with FAR Part 10.� **** NO SOLICITATION IS BEING ISSUED AT THIS TIME **** The purpose of this synopsis is to identify qualified vendors capable of manufacturing items in accordance with the requirements listed below. �Please review the below NSNs and provide us with any additional sources that can manufacture these items. �Please provide the company name, city and state OR country if applicable, and POCs with telephone, fax and/or email information. �All this information can be submitted to Scott Knowles at Scott.Knowles@dla.mil. �Phone 614 692-0639. We thank you in advance for your assistance. NSN�� ��� ��� �NAME�� ��� ��� ��� � 6135014134747�� ��� �BATTERY ASSEMBLY 6135014904422�� ��� �BATTERY NON-RECHARGABLE �� � --------------------------------------------------------------- Responses to this Request for Information (RFI) are not considered offers and cannot be accepted by the Government to form a binding contract. This RFI is for market research purposes only. Any information submitted is at the company's own expense. The Government will not reimburse respondents for any costs associated with submission of capability statements in connection with the market survey. Any information provided is voluntary. **** NO SOLICITATION IS BEING ISSUED AT THIS TIME**** **ITEM DESCRIPTIONS ** NSN: 6135-01-413-4747 BATTERY ASSEMBLY RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ZD080: SAMPLING: � � �THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ � � �H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE � � �SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, � � �STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR � � �AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF � � �VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED � � �ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE � � �SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER � � �MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR � � �PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT � � �SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT � � �UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL � � �REQUEST FOR VARIANCE (DEVIATION OR WAIVER) CS120: NOTE: �THE CITED DRAWING IS A SOURCE CONTROLLED � � �DRAWING AND AS OF THE DATE OF THIS SOLICITATION � � �ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE � � �BEEN APPROVED. �EVEN THOUGH SOURCES AND APPROVED � � �PART NUMBERS ARE PROVIDED, THE ITEMS � � �FURNISHED MUST MEET THE REQUIREMENTS OF THE � � �CITED DRAWING. �OFFERORS WHO ARE INTERESTED IN � � �QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE � � �ACQUISITION MUST CONTACT THE COGNIZANT DESIGN � � �ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED � � �DRAWING. � � �ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES � � �THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT � � �THIS TIME. ZD072: Hazard Communication Standard Notice: � � �Effective June 1, 2015, Federal Standard No. 313-E, Material Safety � � �Data, Transportation Data and Disposal Data for Hazardous Materials � � �Furnished to Government Activities, establishes the requirement for � � �preparation and submission of Safety Data Sheets (SDS) in lieu of � � �Material Safety Data Sheets (MSDS) by suppliers who provide hazardous � � �materials to government activities. � � �The Occupational Safety and Health Administration (OSHA) has modified � � �its Hazard Communication Standard (HCS) to conform to the United Nations � � �Globally Harmonized System of Classification and Labeling of Chemicals. � � � As a result of this change, GSA revised Federal Standard No. 313-E � � �requiring Safety Data Sheets for classifying chemicals and communicating � � �the applicable information on labels. � � �In accordance with the revised standard after June 1, 2015: � � �1. Suppliers will be required to submit, to the contracting officer for � � �review and approval prior to award, safety data sheets consistent with � � �the requirements found at 29 C.F.R. �1910.1200 for hazardous materials � � �delivered to the Government. � � �2. Suppliers will also be required to submit, to the contracting officer � � �for review and approval prior to award, Hazardous Communication Standard � � �(HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or � � �current Consumer Product Safety Act (CPSA), Federal Hazardous Substance � � �Act (FHSA) labels when subject to labeling requirements under those � � �statutes. This product labeling is required for hazardous materials � � �delivered to the Government. � � �3. Finally, suppliers must train their employees on the new safety data � � �sheets, hazardous communication labels, and requirements of 29 C.F.R. � � �1910.1200. � � �For more information on SDS, refer to OSHAs website, available at: � � �https://www.osha.gov/law-regs.html � � �For information on 29 C.F.R. 1910.1200, refer to the below link: � � �https://www.osha.gov/dsg/hazcom/index.html ZD025: MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL � � �NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT � � �CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED � � �UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY � � �USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED � � �INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; � � �AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. � � �PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS � � �CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN � � �A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR � � �MERCURY COMPOUND. (IAW NAVSEA 5100-003D). RQ032: EXPORT CONTROL OF TECHNICAL DATA � � �This item has technical data some or all of which is subject to � � �export-control of either the International Traffic in Arms regulations � � �(ITAR) or the Export Administration Regulations (EAR), and cannot be � � �exported without prior authorization from either the Department of State � � �or the Department of Commerce. Export includes disclosure of technical � � �data to foreign persons and nationals whether located in the United � � �States or abroad. This requirement applies equally to foreign national � � �employees and U.S. companies and their foreign subsidiaries. DFARS � � �252.225-7048 is applicable to this data. � � �The Defense Logistics Agency (DLA) limits distribution of export-control � � �technical data to DLA contractors that have an approved US/Canada Joint � � �Certification Program (JCP) certification, have completed the � � �Introduction to Proper Handling of DOD Export-Controlled Technical Data � � �Training and the DLA Export-Controlled Technical Data Questionnaire � � �(both are available at the web address given below), and have been � � �approved by the DLA controlling authority to access the � � �export-controlled data. Instructions for obtaining access to the � � �export-controlled data can be found at: � � �https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ � � �To be eligible for award, offerors and any sources of supply proposed � � �for use are required to have an approved JCP certification and have � � �been approved by the DLA controlling authority to access � � �export-controlled data managed by DLA. DLA will not delay award in � � �order for an offeror or its supplier to apply for and receive approval � � �by the DLA controlling authority to access the export-controlled data. RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) �item with a � � �shelf life of 60 months (non-extendable) applies to this item. � � �Engineering Exceptions: Acceptance Test Procedure to be conducted on � � �100% of batteries at the time of manufacturing. End Exceptions. � � �CRITICAL APPLICATION ITEM � � �MATHEWS ASSOCIATES INC 4U927 P/N 7022097 � � �IAW BASIC DRAWING NR 53711 7022097 � � �REVISION NR A � DTD 04/23/2002 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 53711 7022097 � � �REVISION NR A � DTD 08/02/2011 � � �PART PIECE NUMBER: � � �IAW REFERENCE DRAWING NR 53711 7022097 � � �REVISION NR A � DTD 08/02/2011 � � �PART PIECE NUMBER: PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 �PRES MTHD:HM �CLNG/DRY:Z �PRESV MAT:ZZ WRAP MAT:ZZ �CUSH/DUNN MAT:ZZ �CUSH/DUNN THKNESS:Z UNIT CONT:ZZ �OPI:M INTRMDTE CONT:ZZ �INTRMDTE CONT QTY:ZZZ PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PACKING CODE: 6 with ACCEPTANCE CRITERIA 3. ZZ = special marking requirements: �02 - ARROW UP; �ATTENTION: READ PRODUCT WARNING LABEL. --------------------------------------------------------------- NSN: 6135-01-490-4422 BATTERY,NONRECHARGEABLE RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS � � �(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE � � �DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB � � �AT: � � �http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � � �FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE � � �SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. �FOR LARGE � � �ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE � � �APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON � � �REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ALKALINE ZD025: MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL � � �NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT � � �CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED � � �UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY � � �USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED � � �INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; � � �AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. � � �PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS � � �CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN � � �A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR � � �MERCURY COMPOUND. (IAW NAVSEA 5100-003D). ZD072: Hazard Communication Standard Notice: � � �Effective June 1, 2015, Federal Standard No. 313-E, Material Safety � � �Data, Transportation Data and Disposal Data for Hazardous Materials � � �Furnished to Government Activities, establishes the requirement for � � �preparation and submission of Safety Data Sheets (SDS) in lieu of � � �Material Safety Data Sheets (MSDS) by suppliers who provide hazardous � � �materials to government activities. � � �The Occupational Safety and Health Administration (OSHA) has modified � � �its Hazard Communication Standard (HCS) to conform to the United Nations � � �Globally Harmonized System of Classification and Labeling of Chemicals. � � � As a result of this change, GSA revised Federal Standard No. 313-E � � �requiring Safety Data Sheets for classifying chemicals and communicating � � �the applicable information on labels. � � �In accordance with the revised standard after June 1, 2015: � � �1. Suppliers will be required to submit, to the contracting officer for � � �review and approval prior to award, safety data sheets consistent with � � �the requirements found at 29 C.F.R. �1910.1200 for hazardous materials � � �delivered to the Government. � � �2. Suppliers will also be required to submit, to the contracting officer � � �for review and approval prior to award, Hazardous Communication Standard � � �(HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or � � �current Consumer Product Safety Act (CPSA), Federal Hazardous Substance � � �Act (FHSA) labels when subject to labeling requirements under those � � �statutes. This product labeling is required for hazardous materials � � �delivered to the Government. � � �3. Finally, suppliers must train their employees on the new safety data � � �sheets, hazardous communication labels, and requirements of 29 C.F.R. � � �1910.1200. � � �For more information on SDS, refer to OSHAs website, available at: � � �https://www.osha.gov/law-regs.html � � �For information on 29 C.F.R. 1910.1200, refer to the below link: � � �https://www.osha.gov/dsg/hazcom/index.html A1079: ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE � � �OFFERS IS NOT AVAILABLE AT THE PROCUREMENT � � �AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE � � �DATA PACKAGE INCLUDING DATA FOR THE APPROVED � � �AND ALTERNATE PART FOR EVALUATION. A0003: MIL-STD-130N(1) DATED 16 NOV 2012. � � �IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY � MSDS/PSDS REQUIRED PER FED-STD-313 RS020: Shelf-life requirement RS001 for a TYPE I (CODE Q) �item with a � � �shelf life of 36 months (non-extendable) applies to this item. CRITICAL APPLICATION ITEM MATHEWS ASSOCIATES INC 4U927 P/N MAI-150718 PREP FOR DELIVERY PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001 �PRES MTHD:ZZ �CLNG/DRY:1 �PRESV MAT:00 WRAP MAT:ZZ �CUSH/DUNN MAT:ZZ �CUSH/DUNN THKNESS:Z UNIT CONT:BD �OPI:M INTRMDTE CONT:ZZ �INTRMDTE CONT QTY:ZZZ PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:32 -32 Type I, shelf life PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT � � �Land Transport (ADR/RID) # The product fulfills the requirements of � � �Special Provision 188 of ADR/RID and is therefore, keeping within the � � �prescribed quantity limits, excepted from the application of the � � �Dangerous Goods regulations. � � �Sea Transport (IMDG) - The product fulfills the requirements of Special � � �Provision 188 of IMDG-Code and is therefore, keeping within the � � �prescribed quantity limits, excepted from the application of the � � �Dangerous Goods regulations. � � �Air Transport (IATA) - The product fulfills the requirements of Special � � �Provision A45 of IATA-DGR and is therefore, keeping within the � � �prescribed quantity limits, excepted from the application of the � � �Dangerous Goods regulations. � � �""Per U.S. DOT: � � �If battery meets non-spillable criteria listed in 49 CFR � 173.159(f) � � �and 173.159a(d)(1). � � �Non-spillable batteries are excepted from 49 CFR Subchapter C � � �requirements, provided that the following criteria are met: � � �1. The batteries must be securely packed in strong outer packaging and � � �meet the requirements of 49 CFR � 173.159a. � � �2. The batteries' terminals must be protected against short circuit. � � �3. Each battery and their outer packaging must be plainly and durably � � �marked """"NON-SPILLABLE"""" or """"NON-SPILLABLE BATTERY"""". � � �The exception from 49 CFR, Subchapter C means shipping papers need not � � �show proper shipping name, hazard class, UN number, and packing group � � �and hazardous labels are not required when transporting a non-spillable � � �battery."" IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS ---------------------------------------------------------------------------------------------------------------------- NO SOLICITATION IS BEING ISSUED AT THIS TIME
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/124d072d7ffb42ef855593e5f68cc74f/view)
- Place of Performance
- Address: Columbus, OH 43218, USA
- Zip Code: 43218
- Country: USA
- Zip Code: 43218
- Record
- SN06746540-F 20230714/230712230049 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |