SOLICITATION NOTICE
53 -- TOOLS
- Notice Date
- 6/30/2023 8:37:33 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332510
— Hardware Manufacturing
- Contracting Office
- DLA MARITIME - NORFOLK PORTSMOUTH VA 23709-5000 USA
- ZIP Code
- 23709-5000
- Solicitation Number
- SPMYM123Q0073
- Response Due
- 7/5/2023 8:59:00 PM
- Archive Date
- 07/20/2023
- Point of Contact
- JORGE ARCELAY, Phone: 614-867-4844
- E-Mail Address
-
JORGE.ARCELAY@DLA.MIL
(JORGE.ARCELAY@DLA.MIL)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- SYNOPSIS: The Defense Logistics Agency (DLA) Maritime Norfolk at Norfolk Naval Shipyard (NNSY) intends to award a Firm Fixed Price (FFP) Single Award Contract as Brand Name Specific with Lowest Price Technically Acceptable (LPTA) Evaluation Factors for the item listed below. The required item is for commercial item prepared in accordance with the information in FAR Part 13 and FAR Subpart 12.6, as supplemented with the additional information included in this notice.�� The Contract Line Item (CLIN) is as follows:� -CLIN 0001 �QTY = 1 EA MATERIAL: SHELL MILL HOLDER� DESCRIPTION: BCV40-SMC1 .000-2 1 0 SHELL MILL HOLDER, BIG-PLUS CAT40X01XL2.0 -CLIN 0002 �QTY = 2 EA MATERIAL: HI-POWER MILL CHUCK� DESCRIPTION: BIG BCV40-HMC.500J-2.5 HI-POWER MILL CHUCK FOR HEAVY DUTY END MILLING -CLIN 0003 �QTY = 1 EA MATERIAL: FK WRENCH DESCRIPTION: FK31-33 FK WRENCH, 031-33MM -CLIN 0004 �QTY = 11 EA MATERIAL: MILLING CHUCKS - MEG� DESCRIPTION: BCV40-MEGA 13E-3NL CLAMPING RANGE: 0.125""-.500"" (03-12MM) EXCLUSIVELY FOR HIGH SPEED FINISH END MILLING MEGA E NUT IS INCLUDED, COLLET, WRENCH AND ADJUSTING SCREW MUST BE ORDERED SEPARATELY -CLIN 0005 �QTY = 1 EA MATERIAL: WRENCH 42MM� DESCRIPTION: MGR42 THE ONE-DIRECTION CLUTCH SYSTEM ALLOWS NUTS TO BE TIGHTENED UNIFORMLY AROUND THE WHOLE CIRCUMFERENCE. IT ELIMINATES THE RISK OF THE WRENCH COMING OFF DURING WORK. �-CLIN 0006 �QTY = 11 EA MATERIAL: ADJUSTING SCREW� DESCRIPTION: NBA13B USE TO ADJUST THE PROJECTION LENGTH OF TOOLS. / USE TO ADJUST THE PROJECTION LENGTH OF ENDMILLS. �-CLIN 0007 �QTY = 2 EA MATERIAL: MEGA E COLLET .125� DESCRIPTION: MEC13-1/8AA USE THE GRIP SHANK FOR ITEMS WITHIN H7 TOLERANCE. -CLIN 0008 �QTY = 1 EA MATERIAL: MEGA E COLLET .137� DESCRIPTION: MEC13-3/16AA USE THE GRIP SHANK FOR ITEMS WITHIN H7 TOLERANCE. -CLIN 0009 �QTY = 2 EA MATERIAL: MEGA E COLLET .250� DESCRIPTION: MEC13-1/4AA USE THE GRIP SHANK FOR ITEMS WITHIN H7 TOLERANCE. �-CLIN 0010 �QTY = 3 EA MATERIAL: MEGA E COLLET .375� DESCRIPTION: MEC13-3/8AA USE THE GRIP SHANK FOR ITEMS WITHIN H7 TOLERANCE. -CLIN 0011 �QTY = 3 EA MATERIAL: MEGA E COLLET .500� DESCRIPTION: MEC13-1/2AA USE THE GRIP SHANK FOR ITEMS WITHIN H7 TOLERANCE. -CLIN 0012 �QTY = 2 EA MATERIAL: MEGA E PERFECT SEAL� DESCRIPTION: EPS13-04 A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0013 �QTY = 1 EA MATERIAL: MEGA E PERFECT SEAL� DESCRIPTION: EPS13-05 MEGA E PERFECT SEAL, EPS (EPS13-05) A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0014 �QTY = 2 EA MATERIAL: MEGA E PERFECT SEAL� DESCRIPTION: EPS13-07 MEGA E PERFECT SEAL, EPS (EPS13-07) A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0015 �QTY = 3 EA MATERIAL: MEGA E PERFECT SEAL� DESCRIPTION: EPS13-10 MEGA E PERFECT SEAL, EPS (EPS13-10) A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0016 �QTY = 3 EA MATERIAL: MEGA E PERFECT SEAL� DESCRIPTION: EPS13-13 MEGA E PERFECT SEAL, EPS (EPS13-13) A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE -CLIN 0017 �QTY = 10 EA MATERIAL: MILLING CHUCKS - MEG� DESCRIPTION: BCV40-MEGA 16N-2.5 MILLING CHUCKS - MEGA NEW BABY CHUCK AND NUT SET, ADJUSTABLE SCREW (BCV40-MEGA16N-2.5) CLAMPING RANGE: 0.010""-1.000"" FOR DRILLS, REAMERS, TAPS & FINISHING END MILLS MEGA NEW BABY NUT IS INCLUDED, COLLET, WRENCH AND ADJUSTING SCREW MUST BE ORDERED SEPARATELY -CLIN 0018 �QTY = 10 EA MATERIAL: ADJUSTMENT SCREW, NB� DESCRIPTION: NBA16B USE TO ADJUST THE PROJECTION LENGTH OF TOOLS. / USE TO ADJUST THE PROJECTION LENGTH OF ENDMILLS. -CLIN 0019 �QTY = 1 EA MATERIAL: BABY CHUCK AND NUT� DESCRIPTION: BCV40-MEGA20N-2.5 MEGA NEW BABY CHUCK AND NUT SET, ADJUSTABLE SCREW (BCV40-MEGA20N-2.5) CLAMPING RANGE: 0.010""-1.000"" FOR DRILLS, REAMERS, TAPS & FINISHING END MILLS -CLIN 0020 �QTY = 1 EA MATERIAL: ADJUSTMENT SCREW � DESCRIPTION: NBA20B ADJUSTMENT SCREW (NBA20B) TO BE USED FOR ADJUSTING PROTRUSION LENGTH -CLIN 0021 �QTY = 1 EA MATERIAL: MEGA WRENCH � DESCRIPTION: MGR46 MEGA WRENCH (MEGA CHUCK SERIES) (MGR46) THE ONE-DIRECTION CLUTCH SYSTEM ALLOWS NUTS TO BE TIGHTENED UNIFORMLY AROUND THE WHOLE CIRCUMFERENCE. IT ELIMINATES THE RISK OF THE WRENCH COMING OFF DURING WORK. -CLIN 0022 �QTY = 1 EA MATERIAL: TOOL HOLDER STARTER �� DESCRIPTION: SNBC16 COLLET CHUCKS, MILLING CHUCK & INDEXABLE END MILL -CLIN 0023 �QTY = 1 EA MATERIAL: HIGH PRECISION, MEGA �� DESCRIPTION: NBC20-19AA HIGH PRECISION, MEGA13N/16N/20N (NBC20-19.0-AA) THE WORLD-CLASS RUNOUT ACCURACY OF 1 lM AT THE NOSE DEMONSTRATES AN OUTSTANDING POWER EVEN AT SUPER HIGH SPEED ROTATION. -CLIN 0024 �QTY = 2 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS16-03035 MEGA PERFECT SEAL, MPS (MPS16-03035) NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0025 �QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS16-0304 MEGA PERFECT SEAL, MPS MPS16-0304 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0026 �QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS16-0405 MEGA PERFECT SEAL, MPS MPS16-0405 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0027 �QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS16-0506 MEGA PERFECT SEAL, MPS MPS16-0506 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0028 �QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS16-06065 MEGA PERFECT SEAL, MPS MPS16-06065 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0029 �QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS16-0708 MEGA PERFECT SEAL, MPS MPS16-0708 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0030 �QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS16-09095 MEGA PERFECT SEAL, MPS MPS16-09095 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0031 �QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS16-1011 MEGA PERFECT SEAL, MPS MPS16-1011 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0032 �QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS16-11115 MEGA PERFECT SEAL, MPS MPS16-11115 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0033 �QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS16-1213 MEGA PERFECT SEAL, MPS MPS16-1213 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0034 �QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS16-1415 MEGA PERFECT SEAL, MPS MPS16-1415 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0035 �QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS16-1516 MEGA PERFECT SEAL, MPS MPS16-1516 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0036 �QTY = 1 EA MATERIAL: MEGA PERFECT SEAL, M �� DESCRIPTION: MPS20-1819 MEGA PERFECT SEAL, MPS MPS20-1819 NO COOLANT COLLET REQUIRED. A NEW TYPE OF SEALING FUNCTION WHERE THE HIGHER THE COOLANT PRESSURE, THE CLOSER THE PS RING ADHERES TO THE SHANK OF THE CUTTING TOOL TO ENHANCE THE SEALING PERFORMANCE. -CLIN 0037 �QTY = 1 EA MATERIAL: SYNCH RO SHANK ��� DESCRIPTION: BCV40-MGT6-3.25 MEGA SYNCHRO TAPPING HOLDER BCV40XMGT6XL3.25 -CLIN 0038 �QTY = 1 EA MATERIAL: SYNCHRO TAPPING HOLD ���� DESCRIPTION: BCV40-MGT12-3.25 MEGA SYNCHRO TAPPING HOLDER BCV40XMGT12XL3.25 -CLIN 0039 �QTY = 1 EA MATERIAL: SYNCHRO TAPPING ADAP ����� DESCRIPTION: MGT6-NO.6-3 SYNCHRO TAPPING ADAPTER -CLIN 0040 �QTY = 1 EA MATERIAL: SYNCHRO TAPPING ADAP ����� DESCRIPTION: MGT6-NO.8-3 SYNCHRO TAPPING ADAPTER -CLIN 0041 �QTY = 1 EA MATERIAL: SYNCHRO TAPPING ADAP ����� DESCRIPTION: MGT6-NO.10-3 SYNCHRO TAPPING ADAPTER -CLIN 0042 �QTY = 1 EA MATERIAL: SYNCHRO TAPPING ADAP ����� DESCRIPTION: MGT12-AU1/4-3 SYNCHRO TAPPING ADAPTER -CLIN 0043 �QTY = 1 EA MATERIAL: TORQUE FIT BASE ����� DESCRIPTION: TF-40 TORQUE FIT BASE -CLIN 0044 �QTY = 1 EA MATERIAL: TOOLING MATE ADAPTER ������ DESCRIPTION: TMA40-40 AN ADAPTER FOR TOOLING MATE The requirement will be solicited as a total small business set aside. The NAICS code applicable to this procurement is 332510 Hardware Manufacturing with a size standard of 750 employees. The Product Service Code is 5340. The solicitation document incorporates provisions and clauses in effect through FAC 2023-01 and DFARS Change Notice 10/28/2022.� The anticipated delivery date for this acquisition is 31 JULY 2023. The solicitation, any documents related to this procurement, and all amendments issued will be in electronic form only. THE SOLICITATION IS NOT YET AVAILABLE.� Quotes will be due by�12:00 PM EST�on�14 FEB 2023. Responses to the solicitation notice shall be emailed to the attention of�Jorge Arcelay at Jorge.Arcelay@dla.mil. Please make sure that the solicitation number (SPMYM123Q0073) is included in the subject line of any email correspondence. Emails without subject lines will not be read because of security issues.� Potential offerors are hereby notified that the solicitation and any subsequent amendments will only be available by downloading the documents at www.SAM.gov (Contracting Opportunities). The Government is not responsible for inability of the Offeror's to access solicitation documents posted. Prospective Offeror's should also register at on the interested vendor list under�SPMYM123Q0073. No telephone or FAX requests will be accepted, and no hardcopy solicitation/amendment will be mailed or faxed.� All responsible sources may submit a proposal which may be considered by the Government. By submitting a quote, the offeror will be self-certifying that neither the principal corporate officials nor owners are currently suspended, debarred, or otherwise ineligible to receive contracts from any federal agency. Failure to do so may represent grounds for refusing to accept the proposal. By submission of a proposal, the offeror acknowledges the requirement that a prospective awardee must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment of any contract resulting from the solicitation, except for awards to foreign vendors for work to be performed outside the United States. Lack of registration in the SAM database will make an offeror ineligible for award. Offerors may obtain information on registration and annual confirmation requirements by calling 1-866-606-8220, or via the Internet at https://www.sam.gov. All questions shall be submitted in accordance with the solicitation, dates and procedures. Please direct all questions regarding this requirement to�Jorge Arcelay at Jorge.Arcelay@dla.mil.��
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/e676f3f9756241a89a9b4645e52bf805/view)
- Place of Performance
- Address: Portsmouth, VA 23709, USA
- Zip Code: 23709
- Country: USA
- Zip Code: 23709
- Record
- SN06734448-F 20230702/230630230046 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |