SAMDaily.us | PRESOL | 56 | 56--Fence Perimeter Detection

SAMDAILY.US - ISSUE OF JUNE 24, 2023 SAM #7879
SOLICITATION NOTICE

56 -- 56--Fence Perimeter Detection

Notice Date: 6/22/2023 11:00:45 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 423390 — Other Construction Material Merchant Wholesalers
Contracting Office: FCI TALLAHASSEE TALLAHASSEE FL 32301 USA
ZIP Code: 32301
Solicitation Number: 1142466
Response Due: 6/28/2023 8:00:00 AM
Archive Date: 12/25/2023
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 1142466 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-04. The associated North American Industrial Classification System (NAICS) code for this procurement is 423390 with a small business size standard of 100.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2023-06-28 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be TALLAHASSEE, FL 32301 The DOJ BOP Field Offices-FCI TALLAHASSEE requires the following items, Meet or Exceed, to the following: LI 001: FiberPatrol, Ultrawave Equipment PART #: FP115005U FP1150 Sensor Unit for fence, wall, buried perimeter, and TPI applications. Hardware capable of providing up to 5 km (3.10 mi.) of detection processing on each of its two sensor channels, up to 10 km (6.21 mi.) in total. Price includes a baseline 1000 meters of activation license, the activationlicense defaults to FP-PML-05 (fence and wall applications). The detection capabilities of the Sensor Unit can be extended with additional separately- purchased activation licenses - either FP-PML-05 for fence/wall, FP-PML-05B for buried detection, or a mix of the two. These commodities, technologies,or software are regulated under the U.S.A. Export Administration ECCN 6A999a. Diversion contrary to U.S.A. law is prohibited., 1, EA; LI 002: FiberPatrol, Ultrawave Equipment PART #: FP-PML-05 Per-meter activation license applicable to FP115005U and FP115005H Sensor Unit for fence-mounted applications. The number of meters licensed needs to cover all cable beyond the initial lead-in section (max 500 meters) including all service loops, isolation loops, gate bypasses, etc. Initial lead-in in excess of 500 meters needs to be added to the licensed section. Each meter licensed activates both sensor channels., 300, EA; LI 003: FiberPatrol, Ultrawave Equipment PART #: FPMA0922-001 FiberPatrol fiber connection module for FP1150 systems. Includes two patch cords, two end modules, associated splice trays, and 1U rack-mount splice enclosure., 1, EA; LI 004: FiberPatrol, Ultrawave Equipment PART #: GB0296-17 17 in 1U Rackmount KVM. Supports VGA video connection and USB for keyboard and mouse. Includes KVM cable., 1, EA; LI 005: FiberPatrol, Ultrawave Equipment PART #: FPSP1624-001 Fiberoptic sensor/lead cable for fence, wall and buried applications, 24 fibers, corrugated steel tape armor, single polyethylene jacket. Priced per meter (1 meter = 3.28 ft). Preferred reel lengths can be specified at the time of order. For reels of less than 2,000 meters an additional per-reel handling charge will apply., 1300, EA; LI 006: FiberPatrol, Ultrawave Equipment PART #: GH1080-08 Stainless steel cable ties, 100 pieces, 200 x 4.6 x 0.26 mm (8 x 0.18 x 0.01 inch), 22, EA; LI 007: FiberPatrol, Ultrawave Equipment PART #: GX0310 Tool - manual tension and cut-off tool for stainless steel cable ties, 2, EA; LI 008: FiberPatrol, Ultrawave Equipment PART #: FPKT0201-001 Field splice enclosure, 4 cable ports, in-line. Includes grommet kit and splicing supplies for 24 splices., 6, EA; LI 009: FiberPatrol, Ultrawave Equipment PART #: FPKT0500-001 Sensor cable management kit for gates. One meter (3 ft.) of 5 cm. (2 in.) diameter split conduit, 2.3 meters (7.5 ft.) of split cable loom, two (2) hose clamps, 4, EA; LI 010: FiberPatrol, Ultrawave Equipment PART #: E4FG0101-001 UltraWave transmitter and receiver pair, includes two mounting kits and four cable glands., 3, EA; LI 011: FiberPatrol, Ultrawave Equipment PART #: 00BA2101-001 Comm card, single-mode fiber optic (SMFO), G2 Silver, 3, EA; LI 012: FiberPatrol, Ultrawave Equipment PART #: GP0160-185 185W Indoor/Outdoor AC/DC Power Supply (48V) IP65, 1, EA; LI 013: FiberPatrol, Ultrawave Equipment PART #: GE0444 Interface Cable - 3m USB Male Type A to USB Male Type B. For use with Universal Configuration Module (UCM) software, 1, EA; LI 014: FiberPatrol, Ultrawave Equipment PART #: 00CD0100-001 Universal documentation package on USB - includes Universal Configuration Manager (UCM) software, 1, EA; LI 015: FiberPatrol, Ultrawave Equipment PART #: FP-WEB-1 FiberPatrol Technical Training Certification Course - Web Session. To cover system design, installation planning, setup and calibration. Price per attendee, 1, EA; LI 016: Ultralink I/O for RANS and Dopplers PART #: 00EM1400-001 UltraLink processor module. Provides 8 relay outputs and 8 dry-contact inputs. Controls up to 8 UltraLink expansion modules. Accepts G2 Silver comm card. DIN-rail mount, 1, EA; LI 017: Ultralink I/O for RANS and Dopplers PART #: 00EM1600-001 UltraLink expansion module, 32 relay outputs. DIN-rail mount Includes link cable for side-by-side modules, 1, EA; LI 018: Ultralink I/O for RANS and Dopplers PART #: 00BA2101-001 Comm card, single-mode fiber optic (SMFO), G2 Silver, 1, EA; LI 019: Ultralink I/O for RANS and Dopplers PART #: GP0151-48 DIN rail DC power supply for UltraLink I/O modules. 48 VDC, 40W, 85 264 VAC 47 64 Hz input, DC OK relay, 1, EA; LI 020: Ultralink I/O for RANS and Dopplers PART #: 00EM1302-001 Mini Silver Network Interface Unit. USB to RS-422 and single-mode fiber optic (SMFO) interfaces. DIN-rail mount., 2, EA; LI 021: Ultralink I/O for RANS and Dopplers PART #: 00MA0100-001 UltraLink rack-mount swing-out DIN rail, 4U, 1, EA; LI 022: Ultralink I/O for RANS and Dopplers PART #: GE0444 Interface Cable - 3m USB Male Type A to USB Male Type B. For use with Universal Configuration Module (UCM) software, 2, EA; LI 023: Ultralink I/O for RANS and Dopplers PART #: 00CA0103-001 UltraLink link cable, 58 cm (23 in), for linking back to back modules or those on different rails, 1, EA; LI 024: Starnet 2 for Silver Network PART #: S2FG0102-001 StarNet 2 hardware & software 2-station bundle includes:- two (2) industrial small form-factor mini-tower computers, each with Windows 10 Pro installed and activated, comes with desktop mouse and keyboard. Minimum specifications: i5 processor, 16 GB memory, 2 x 256 GB SSD in RAID 1 configuration, two DisplayPort video ports with HDMI adapters, two GB E'net ports- StarNet 2 USB key, includes executable software, documentation, and licenses one (1) server instance and two (2) workstation instances (S2SW0102)- Network Manager software on USB (00FG0220)- Network Manager software and StarNet 2 server software pre-installed- SQL Standard Edition installed and licensed., 1, LOT; LI 025: Starnet 2 for Silver Network PART #: S2KT0200-001 StarNet 2 site-specific database creation, includes up to 5 maps and 100 mapped control points (alarm zones and outputs)., 1, EA; LI 026: Starnet 2 for Silver Network PART #: SN2-WEB-1 StarNet 2 Technical Training Course - Web Session. This should cover system design, installation planning, setup nad calibration. Price per attendee., 1, EA; LI 027: PART #: TSASPEC-3 On-site Technical Support Assistance - Specialist, FiberPatrol, OmniTrax, VMS, XField and other specialized products, 2, EA; LI 028: Shipping and Handling to be included in all line items., 1, LOT; LI 029: PART #: E4FG0101-001 UltraWave transmitter and receiver pair, includes two mounting kits and four cable glands., 1, EA; LI 030: PART #: FPFG0201-001 Replacement blank solid-state drive for FP1150 processor unit. Provided in hot-swap tray, 1, EA; LI 031: PART #: GB0390 Replacement power supply module for FiberPatrol FP1150 Sensor Units, and FPEM0101-002, FPEM0102-002, and FPEM0112-002 FiberPatrol processors, 1, EA; LI 032: PART #: 00BA2101-001 Comm card, single-mode fiber optic (SMFO), G2 Silver, 1, EA; LI 033: PART #: 00EM1400-001 UltraLink processor module. Provides 8 relay outputs and 8 dry-contact inputs. Controls up to 8 UltraLink expansion modules. Accepts G2 Silver comm card. DIN-rail mount, 1, EA; LI 034: PART #: 00EM1600-001 UltraLink expansion module, 32 relay outputs. DIN-rail mount Includes link cable for side-by-side modules, 1, EA; LI 035: PART #: GP0160-185 185W Indoor/Outdoor AC/DC Power Supply (48V) IP65, 1, EA; LI 036: PART #: GP0151-48 DIN rail DC power supply for UltraLink I/O modules. 48 VDC, 40W, 85 264 VAC 47 64 Hz input, DC OK relay, 1, EA; LI 037: PN RA-1000S RANS Universal Controller, 1, EA; LI 038: PN RA-520 Voice Modules, 14, EA; LI 039: PN RA-550 Radio Paging Interface Module, 1, EA; LI 040: PN RA-505 Channel Alert (Monitoring Function), 1, EA; LI 041: Transmitter PN RA-660 UHF (450-470 MHz), 1, EA; LI 042: PN RA-651-C Channel Alert (Interface/Ability), 1, EA; LI 043: PN RA-683 Transmitters (UHF 450-470MHz), 1, EA; LI 044: PN RA-655 Transmitter cable Assy, 1, EA; LI 045: PN RG-8 Low loss cable per foot, 40, EA; LI 046: PN MP900 Lightning Arrestor, 1, EA; LI 047: RA-555U UHF (450-470 MHz), 2, EA; LI 048: PN RA-556 Leather Holster for Receiver, 2, EA; LI 049: PN RA-560 Battery Charger for Receiver, 2, EA; LI 050: Shipping and handling to be included on all line items, 1, LOT; Solicitation and Buy Attachments ***Question Submission: Interested Sellers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOJ BOP Field Offices-FCI TALLAHASSEE intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOJ BOP Field Offices-FCI TALLAHASSEE is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com.Sellers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Sellers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Sellers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Sellers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com. Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. As defined in the Federal Acquisition Regulation (FAR) 2.101, the terms offer and offeror refer to a response to a solicitation that, if accepted, would bind the submitter to perform the resultant contract. The terms bid and bidder refer to an offer submitted in response to an Invitation for Bid (IFB). The term proposal refers to an offer submitted in response to a Request for Proposal (RFP). The terms quotation, quote, and quoter refer to a non-binding submission in response to a Request for Quotation (RFQ) which is not an offer. Unless the Buyer indicates otherwise within a particular line item description, each Seller shall include in its online Bid/Proposal/Quotation individual pricing for all required line items in order to be considered for award (i.e., Do not use the Included in another line item function when pricing each line item). If a line item cannot be separately priced, you must notify the buyer through the FedBid Submit a Question feature regarding which line item(s) should be included in which other line item(s) and request reposting. Failure to comply with this term may result in the Bid/Proposal/Quotation being determined to be unacceptable. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. Bid/Offer MUST be good for 60 calendar days after close of Buy, unless otherwise indicated. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. No partial shipments are permitted unless specifically authorized at the time of award. Q&A -Please submit all questions by using the 'Submit a Question' button. This buy will then be reposted with Q&A based on the questions that come in (if applicable). The Contracting Officer will indicate elsewhere in this Buy as to whether responses will be evaluated for award based either upon (a) price and pricing factors only (Bids/Quotes) or (b) price and other factors (Proposals/Quotes). All Bids/Proposals/Quotations must conform to the listed specifications or the Statement of Work. If award criteria are based upon (b) price and other factors, the Contracting Officer shall clearly indicate the criteria to be applied elsewhere in this Buy. In addition to providing pricing at www.unisonmarketplace.com for this solicitation, each Bidder/Offeror/Quoter must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this Buy. Submissions can be sent to marketplacesupport@unisonglobal.com For Exact Match Only Commodity Buys- NO SUBSTITUTIONS, EXACT MATCH ONLY. The Bidder/Offeror/Quoter may not substitute any item/service listed on this order without prior written approval from the BOP Contracting Officer. No other individual is authorized, either verbally or in writing to change part numbers, manufacturer, quantity, delivery dates, or any other specifications of this Buy. Items/services that do not conform to descriptions and part numbers found in this Buy will be rejected at the time of delivery causing a return at the contractor's expense. For all buys other than Exact Match Sellers MUST document what they are bidding for evaluation for award. Sellers must include, extended specs and/or manufacturer name and part numbers (if applicable). Failure to do this may result in non-consideration of the Bid/Proposal/Quotation. This information is REQUIRED in order for a sellers Bid/Proposal/Quotation to be evaluated for award. FAR 52.211-6.
Web Link: SAM.gov Permalink
(https://sam.gov/opp/430d3d9bc4b8427ab3ae8a9abcb6f1e4/view)
Place of Performance: Address: 501 Capital Circle NE , Tallahassee, FL 32301, USA; Zip Code: 32301; Country: USA
Record: SN06725014-F 20230624/230622230117 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

56 -- 56--Fence Perimeter Detection