SOURCES SOUGHT
73 -- Sources Sought - DFAC Equipment
- Notice Date
- 5/8/2023 11:08:16 AM
- Notice Type
- Sources Sought
- NAICS
- 335220
— Major Household Appliance Manufacturing
- Contracting Office
- W7NN USPFO ACTIVITY NHANG 157 PORTSMOUTH NH 03801-2886 USA
- ZIP Code
- 03801-2886
- Solicitation Number
- W50S8A23Q0009
- Response Due
- 5/22/2023 1:00:00 PM
- Point of Contact
- Richard Trafton, Phone: 6037153669, Matthew Lapointe, Phone: 6032251220
- E-Mail Address
-
Richard.C.Trafton.Civ@army.mil, matthew.r.lapointe.civ@army.mil
(Richard.C.Trafton.Civ@army.mil, matthew.r.lapointe.civ@army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- THIS IS NOT A SOLICITATION ANNOUNCEMENT. This is a SOURCES SOUGHT only. The purpose of the synopsis is to gain knowledge of potential qualified sources and their business size classification relative to NAICS 335220 - Major Household Appliance Manufacturing, a small business size standard of 1,500 employees. Responses to this synopsis will be utilized by the Government to determine the appropriate procurement methodology. After review of the responses to this sources sought synopsis, a solicitation announcement may be published to the general public on contract opportunities at https:// sam.gov. Responses to this sources sought synopsis shall not be considered a response to a solicitation. All interested offerors will respond as an interested party to this sources sought. THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. The New Hampshire Air National Guard requires Dining Facility Equipment as described in the CLINS below: CUN 0001: Commercial Display Refrigerator (QTY= 1 EA) Electrical: 115V/60Hz/1Phase Size: Not to exceed W55� X D34� X H79� Capacity: 49 Cubic Feet or greater Construction material: Stainless Steel, Aluminum & Vinyl Door Style: Sliding Glass Doors Minimum of 8 PVC coated adjustable shelves CLIN 0002: Dual Temp Refrigerator and Freezer Electrical: 115V/60Hz/1Phase Size: Not to exceed W50� X D34� X H75� Construction material: Stainless Steel Door Style: Swing General Requirements: Two (2) doors, two (2) sections, one refrigerated section one freezer section Temperature ranges: refrigerator 33-54F, freezer -10-54F. CLIN 0003: Pass-Thru Refrigerator Electrical: 115V/60Hz/1Phase Size: Not to exceed W28� X D40� X H85� Construction material: Stainless Steel Door Style: Swing, Stainless Steel Minimum of 4 PVC coated adjustable shelves CLIN 0004: Pass-Thru Warming Cabinet Electrical: 208-240V/60Hz/1Phase Size: Not to exceed W28� X D40� X H85� Construction material: Stainless Steel Door Style: Swing, Stainless Steel Minimum of 3 stainless steel adjustable shelves If you are interested, please provide the requested information as well as the information indicated below. Responses to this notice should include company name, address, points of contact, and business size according to the following: 1.����������� Estimated amount for each CLIN. 2.����������� Please indicate the size status and representations of your business, such as but not limited to: Service Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), 8(a), Large Business, etc.)? 3.����������� Is your company considered small under the NAICS code identified under this RFI? 4.����������� Are you the manufacturer, distributor, or an equivalent solution to the items being referenced above? 5.����������� If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, point of Contact and size status (if available). 6.����������� If you are a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? 7.����������� Is your company a GSA contract holder? If so, please provide the contract number. 8.����������� If you are a GSA contract holder, are the items/solution you are providing information for available on your schedule/contract? 9.����������� Please provide detailed technical product descriptions or brochures. 10.��������� Please submit your capabilities regarding the salient characteristics being provided and any information pertaining to equal to items to establish capabilities for planning purposes? 11.��������� Please provide your UEI number and CAGE code. The information above is intended to be descriptive and not restrictive in order to describe the nature of the services requested. Interested parties are responsible for demonstrating to the Government their ability to provide the services as indicated. If your organization has the potential capacity to provide these supplies, please provide the following information: Organization name, address, email address, Website, telephone number, size standard with social economic status and type of ownership for the organization, cage code, TIN number, NAICS codes (with business size) and GSA Schedule number (if applicable). To respond, you must email your information to the Contracting Officer (KO) and Contracting Specialist (CS) via email prior to 1600hrs EST on 22 May 2023. CS: Richard Trafton, Richard.C.Trafton.civ@army.mil KO: Matt Lapointe, Matthew.R.Lapointe.civ@army.mil
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/2a800a1466da454ab4e5f9e138ea2176/view)
- Place of Performance
- Address: Newington, NH 03801, USA
- Zip Code: 03801
- Country: USA
- Zip Code: 03801
- Record
- SN06675608-F 20230510/230509121210 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |