SOLICITATION NOTICE
70 -- Plasma Booth Upgrade and Repair
- Notice Date
- 5/1/2023 10:55:54 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334118
— Computer Terminal and Other Computer Peripheral Equipment Manufacturing
- Contracting Office
- FA8132 AFSC PZIMC TINKER AFB OK 73145-3303 USA
- ZIP Code
- 73145-3303
- Solicitation Number
- FA813223Q0034
- Response Due
- 5/15/2023 10:00:00 AM
- Archive Date
- 05/30/2023
- Point of Contact
- Michael Acree, Phone: 4052819718, ELIZABETH C. FANNING, Phone: 4057395197
- E-Mail Address
-
michael.acree.8@us.af.mil, elizabeth.fanning@us.af.mil
(michael.acree.8@us.af.mil, elizabeth.fanning@us.af.mil)
- Description
- 76 PMXG Request for the purchase of Upgrades and Repair for one (1) Plasma Booth. The Upgrade and Repair shall include the following: ? The Contractor shall install a new MultiCoat OPDesk (1075594) and processor (1008089) that will integrate into Booth 15 (Multi-Coat). ? The Contractor shall ensure all recipes and previous data shall be transferred over to the new system. ? The Contractor shall ensure the booth and its components shall not lose any previous functionality when converting over to Windows 10. ? The Contractor shall install the TriStar power supply (1064635). It shall have an interface (2318963) that allows it to integrate with the existing components. ? The Contractor shall repair all damaged paneling on the booth. This includes the removal of the damaged interior perforated acoustical wall and sheathing, which is approximately 8� x 9� in area. ? The Contractor shall ensure the new #6/3ft density acoustical rock wool insulation that is 4� thick shall be installed. It shall be within the manufacturer�s specification and be fire retardant. ? The Contractor shall ensure the new G-90 galvanized perforated interior sheathing that is 3/32� x 5/32� that has staggered holes on 60 degree center with 23% open free area shall be installed. ? The Contractor shall ensure the new fire stops shall be installed that are 20 gauge galvanized and be horizontal in orientation. The fire stops shall be Z channels. ? The Contractor shall ensure the 48� x 30� damaged exterior panel shall also be replaced with 12 gauge galvanized panel. ? The Contractor shall ensure the All HAZMAT tasks and permits in 29 CFR 1910 shall be obtained by Tinker AFB. ? The Contractor shall demonstrate and start-up the entire system to ensure that equipment is operational after the work has been performed by a part run-off and out-of-cycle calibration. ? The Contractor shall provide a spare MultiCoat OPDesk (1075594) and processor (1008089) with training on how to upgrade similar model booths. ? Contractor shall provide installation ? Contractor shall provide Training ? The contractor shall provide Performance Verification. ? The Contractor must meet all requirements outlined in the Statement of Work (SOW.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/a86799716bc84f6f8cbf478d12f6223c/view)
- Place of Performance
- Address: Tinker AFB, OK 73145, USA
- Zip Code: 73145
- Country: USA
- Zip Code: 73145
- Record
- SN06667774-F 20230503/230501230114 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |