SOLICITATION NOTICE
34 -- 34--Haas ST30Y
- Notice Date
- 3/27/2023 2:34:13 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333519
— Rolling Mill and Other Metalworking Machinery Manufacturing
- Contracting Office
- W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
- ZIP Code
- 13602-5220
- Solicitation Number
- DPGCTDTS230327a
- Response Due
- 4/4/2023 8:00:00 AM
- Archive Date
- 10/01/2023
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is DPGCTDTS230327a and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-02. The associated North American Industrial Classification System (NAICS) code for this procurement is 333519 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2023-04-04 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Dugway Proving Ground , UT 84022 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: MFR: HAAS Part Number: ST-30Y Description: TO BE INLCUDED STANDARD PROGRAM MEMORY, 1 GB Standard Program Memory; 1 GB of onboard memory for program storage and backup. 3400-RPM SPINDLE � BELT DRIVE 3400-rpm Spindle, 30 hp (22.4 kW), A2-6 spindle nose, 3.0"" (76 mm) bar capacity, belt drive 55-GALLON COOLANT TANK 55-Gallon (208 liter) Coolant Tank with 1 hp (0.75 kW) pump; flows 12 gpm @ 30 psi (45 L/min @ 2 bar) @ 60 Hz, and features a multi-section labyrinth design that prevents chips from reaching the coolant pump. BMT65 DRIVEN TOOLHOLDER KIT Driven Toolholder Kit for the BMT65 Turret, includes 1 each 90-degree driven toolholder and 1 each straight driven toolholder. BMT65 STANDARD TOOLHOLDER KIT Standard BMT65 toolholder kit included with the machine; includes 3 each 1"" OD Toolholders, 1 each 1"" ID Boring Bar Holder, 1 each 1.5"" ID Boring Bar Holder, and 1 each 1.5"" ID Split Boring Bar Holder.\r\n\r\n 10"" HYDRAULIC CHUCK, A2-6 10"" (254 mm) Hydraulic Chuck, A2-6 spindle nose EARLY POWER-FAILURE DETECTION MODULE Early Power-Failure Detection Module; senses a power failure or severe drop in incoming line voltage and quickly brings all axis motion to a safe and controlled stop. ETHERNET INTERFACE Ethernet Interface; allows you to easily transfer files to and from the machine over a local wired network HAASCONNECT: REMOTE MONITORING HaasConnect: Remote monitoring of your Haas machine. Requires the machine to be connected to the Internet. HAASDROP HaasDrop Wireless File Transfer is a fast and convenient method for sending images, videos, and even program files from a mobile device directly to the Next-Generation Control on a Haas CNC machine. Available for Android and iOS devices. MEDIA DISPLAY M-CODE; M130 Media Display M-Code; M130 is used within an NC program to call up media files (images, videos, PDF files) from memory and display them on the control screen as the program runs. NextGen Control only. RIGID TAPPING Rigid Tapping; synchronized tapping, with built-in tap cycles and up to 8X retract speed. SPINDLE ORIENTATION Spindle Orientation allows the spindle to be positioned to a specific, programmed angle, using the spindle motor and spindle encoder for feedback. This option provides inexpensive and repeatable spindle positioning accurate to 0.5 degree 1-YEAR STANDARD WARRANTY 1-Year Standard Warranty. Haas products carry a full 1-year warranty on the entire machine, including the control � that�s 365 days x 24 hours. CONTROL TOUCH SCREEN Touch Screen interface for the Haas control; allows screen navigation, data entry, and other control functions onscreen, without using the keypad. WIFI CONNECTION FOR THE HAAS CONTROL WiFi Connection for the Haas Control; provides wireless connectivity between the Haas control and a local area, User-Definable Macros; allows you to create custom subroutines for canned cycles, probing routines, special functions, and more. Visual Part Programming System; a proprietary conversational programming system to quickly write Gcode for simple milling routines. Includes User Definable Macros. SHIPPING TO BE INCLUDED, 1, EA; LI 002: MFR: Part Number: Description: *A2-5 FINISHING SUB-SPINDLE, 6.5"" CHUCK 4100-rpm Sub-Spindle, A2-5 spindle Nose, 6.5"" Chuck; for finishing the 2nd-op side of the part. Includes part ejector. Not compatible with the BOT turret, or the tailstock option. Compatible with the APL; however, the APL can only load/unload parts from the main spindle. SHIPPING TO BE INCLUDED, 1, EA; LI 003: MFR: Part Number: Description: 6000-RPM SPEED UPGRADE FOR LIVE TOOLING 6000-rpm Live Tooling Speed Upgrade SHIPPING TO BE INCLUDED, 1, EA; LI 004: MFR: Part Number: Description: Belt-Type Chip Conveyor; quick, high-volume chip removal for increased productivity. Discharges chips at standard 55-gallon barrel height. SHIPPING TO BE INCLUDED, 1, EA; LI 005: MFR: Part Number: Description: High-Intensity Lighting; externally mounted LED lights that turn on/off automatically with the machine doors, or manually via switch. SHIPPING TO BE INCLUDED, 1, EA; LI 006: MFR: Part Number: Description: Auto Jet Air Blast for the main spindle keeps the workpiece and workholding clear of chips, without having to open the operator door. NOTE: Main spindle only. SHIPPING TO BE INCLUDED, 1, EA; LI 007: MFR: Part Number: Description: Jet Air Blast, Sub-Spindle; keeps the workpiece and sub-spindle clear of chips, without having to open the operator door. SHIPPING TO BE INCLUDED, 1, EA; LI 008: MFR: Part Number: Description: Parts Catcher System; rotates into position to catch a finished part as it is cut off; allows for unattended machining. NOTE: Two-stage parts catcher currently not available on the DS-30Y SHIPPING TO BE INCLUDED, 1, EA; LI 009: MFR: Part Number: Description: Programmable Chuck Pressure; allows you to adjust your chuck gripping pressure via the part program, or directly from the Haas control. Main spindle only. SHIPPING TO BE INCLUDED, 1, EA; LI 010: MFR: Part Number: Description: Wireless Intuitive Probing System, Lathe; a complete probing system for locating and measuring workpieces. Includes the Haas Visual Programming System, macros, and spindle orientation. Note: Requires the purchase of a 25 mm ID toolholder. SHIPPING TO BE INCLUDED, 1, EA; LI 011: MFR: Part Number: Description: 64 GB Expanded Memory; allows you to store large programs and media files on the machine, eliminating the need for an external storage device. SHIPPING TO BE INCLUDED, 1, EA; LI 012: MFR: Part Number: Description: Remote Jog Handle with extra-large touchscreen display; lets you to get up-close to the machine�s work area for part setup, changeover, and inspection, while still having control of the machine. SHIPPING TO BE INCLUDED, 1, EA; LI 013: MFR: Part Number: Description: Machine Anchoring Kit; anchoring straps, hardware, tube brush, 5/8"" hammer drill bit, and machine anchoring template. SHIPPING TO BE INCLUDED, 1, EA; LI 014: MFR: Part Number: Description: Chip Tray Filter Kit; supplemental chip strainer kit keeps chips from entering the coolant system. Includes a 200-micron filter and metal chip tray basket. SHIPPING TO BE INCLUDED, 1, EA; LI 015: MFR: Part Number: Description: Coolant Tank Oil Skimmer; an integrated solution for keeping your coolant tank free of tramp oils. SHIPPING TO BE INCLUDED, 1, EA; LI 016: MFR: Part Number: Description: 1"" ID Boring Bar Static Toolholder for BMT65 Turret SHIPPING TO BE INCLUDED, 1, EA; LI 017: MFR: Part Number: Description: 1.5"" ID Boring Bar Static Toolholder for BMT65 Turret SHIPPING TO BE INCLUDED, 1, EA; LI 018: MFR: Part Number: Description: 1"" ID Split Boring Bar Static Toolholder for BMT65 Turret SHIPPING TO BE INCLUDED, 1, EA; LI 019: MFR: Part Number: Description: 1"" Half-Index ID Boring Bar Static Toolholder w/3 holes, for BMT65 Turret SHIPPING TO BE INCLUDED, 1, EA; LI 020: MFR: Part Number: Description: Inch Toolholder Kit, BMT65; includes 3 each 1"" OD Toolholders, 1 each 1"" ID Boring Bar Holder, 1 each 1.5"" ID Boring Bar Holder, and 1 each 1.5"" ID Split Boring Bar Holder SHIPPING TO BE INCLUDED, 1, EA; LI 021: MFR: Part Number: Description: Inch 24-Station (Half-Index) Toolholder Kit, BMT65; includes 1 each 1"" & 3/4"" OD 1/2 Index Static Toolholder, 1 each 1"" ID 1/2 Index Boring Holder w/3 holes. SHIPPING TO BE INCLUDED, 1, EA; LI 022: MFR: Description:1"" OD Turning Stick Static Toolholder for BMT65 Turret SHIPPING TO BE INCLUDED, 1, EA; LI 023: MFR: Part Number: Description: 1"" and 3/4"" Half-Index OD Turning Stick Static Toolholder for BMT65 Turret SHIPPING TO BE INCLUDED, 1, EA; LI 024: MFR: Part Number: Description: Inch Sub-Spindle Toolholder Kit, BMT65; includes 3 each 1"" Twin OD Toolholders, 2 each 1.25"" Twin ID Boring Holder, 1 each 1.5"" ID Split Boring Bar Holder. SHIPPING TO BE INCLUDED, 1, EA; LI 025: MFR: Part Number: Description: Inch Sub-Spindle 24-Station (Half-Index) Toolholder Kit, BMT65; includes 1 each 1"" & 3/4"" Twin OD 1/2 Index Toolholder, 1 each 1"" Twin ID 1/2 Index Boring Bar Holder w/3 holes. SHIPPING TO BE INCLUDED, 1, EA; LI 026: MFR: Part Number: Description: 08-0285 BMT65, Inch Split-Body Toolholding Kit ? 1 SHIPPING TO BE INCLUDED, 1, EA; LI 027: MFR: Part Number: Description: BMT65, Inch Toolholding Kit ? 1 SHIPPING TO BE INCLUDED, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Reporting During Contract Performance Equal Opportunity
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/48e3d5822016456e89d13d325240355f/view)
- Place of Performance
- Address: 4223 2nd Street , Dugway Proving Ground , UT 84022, USA
- Zip Code: 84022
- Country: USA
- Zip Code: 84022
- Record
- SN06631187-F 20230329/230327230107 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |