SOLICITATION NOTICE
J -- FY23: Repair to Main Steam Header New Contract West Palm Beach VA Medical Center
- Notice Date
- 3/17/2023 5:37:39 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 238220
— Plumbing, Heating, and Air-Conditioning Contractors
- Contracting Office
- 248-NETWORK CONTRACT OFFICE 8 (36C248) TAMPA FL 33637 USA
- ZIP Code
- 33637
- Solicitation Number
- 36C24823Q0464
- Response Due
- 3/31/2023 1:00:00 PM
- Archive Date
- 06/29/2023
- Point of Contact
- Scott.Frankel@va.gov, Scott Frankel, Phone: (561) 422-8262
- E-Mail Address
-
scott.frankel@va.gov
(scott.frankel@va.gov)
- Small Business Set-Aside
- SDVOSBC Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)
- Awardee
- null
- Description
- RFQ #: 36C24823Q0464 PROJECT TITLE: Repair to Main Steam Header WEST PALM BEACH VA MEDICAL CENTER (WPBVAMC) Page 1 of 1 Page 1 of Page 3 of 26 Page 1 of 1 Page 1 of This is a combined synopsis/solicitation for commercial services/items prepared in accordance with the format in FAR Subpart 12.6 in conjunction with FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. This combined synopsis/solicitation is issued as a Request for Quote (RFQ) 36C24823Q0464. Submit written quotes in accordance with Addendum to FAR 52.212-1, Instruction to Offerors. Oral quotes will not be accepted. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC-2023-01/ 12-1-2022. North American Industrial Classification Standard (NAICS) 238220, Plumbing, Heating, and Air Conditioning Contractors, with a Size Standard of $19 Million. Please use Service Contract Act WD# 2015-4543 Revision #23 12/27/2022. West Palm Beach VA Medical Center intends to award a single Firm Fixed Price (FFP) contract for Repair to Main Steam Header. Project timing and hours are only estimates and subject to change due to changes in VA and WPBVAMC priorities. This procurement is a 100% Total Service-Disabled Veteran Owned Small Business (SDVOSB) Set-Aside and all eligible quoters are encouraged to submit quotes. To be eligible for award quoter must be Verified in the Vendor Information Pages (VIP) (https://www.vip.vetbiz.gov) and be registered with the System for Award Management (SAM) at the time of the close of the RFQ and at the time of award. Quote shall be valid 90 days from the close of this solicitation. Questions are due No Later Than Friday March 24, 2023, at 4:00 PM ET. Only email questions will be excepted. Email questions to Contracting Officer Scott Frankel Scott.Frankel@va.gov. Quotes are due no later than Friday March 31, 2023, at 4:00 PM ET. Quotes will only be accepted in Microsoft Word or .pdf format by email to: Contracting Officer Scott Frankel Scott.Frankel@va.gov. Please insert RFQ# in subject line and Business Size/ Socio-Economic Category. Table of Contents SECTION B 3 B.1 CONTRACT ADMINISTRATION DATA 3 B.2 PRICE/COST SCHEDULE 4 ITEM INFORMATION 4 B.3 DELIVERY SCHEDULE 7 B.4 STATEMENT OF WORK 9 SECTION C - CONTRACT CLAUSES 13 C.1 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) 13 C.2 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999) 13 C.3 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000) 13 C.4 VAAR 852.219-10 VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (JUL 2019) (DEVIATION) 14 C.5 VAAR 852.219-74 LIMITATIONS ON SUBCONTRACTING MONITORING AND COMPLIANCE (JUL 2018) (DEVIATION) 16 SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR ATTACHMENTS 17 SECTION E - SOLICITATION PROVISIONS 18 E.1 ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS COMMERCIAL ITEMS 18 E.2 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) 21 E.3 52.212-2 EVALUATION OF QUOTES 21 Page 1 of 1 Page 1 of Page 20 of 26 Page 1 of 1 Page 1 of SECTION B B.1 CONTRACT ADMINISTRATION DATA 1. Contract Administration: All contract administration matters will be handled by the following individuals: CONTRACTOR: (Company Name) (Address) (City-State-Zip) POINT OF CONTACT: PHONE NUMBER: E-MAIL ADDRESS: UEI #: TAX ID (TIN) #: FSS #: GOVERNMENT: Scott Frankel, Contracting Officer (E): Scott. Frankel@va.gov Network Contracting Office 8 (NCO 8) West Palm Beach Services Team 7305 North Military Trail Palm Beach Gardens, FL 33410 2. CONTRACTOR REMITTANCE ADDRESS: All payments by the Government to the contractor will be made in accordance with: [[X] 52.232-33 Payment by Electronic Funds Transfer - System for Award Management (OCT 2018) 3. INVOICES/PAYMENT: Invoices shall be submitted electronically the following month services were performed in accordance with: 852.232-72 Electronic Submission of Payment Requests (NOV 2018) Upon acceptance of services. Payments shall be made in arrears upon receipt of a properly prepared invoice. In order to comply with the Improper Payment Elimination and Recovery Act of 2012 (IPERA), the VA has mandated electronic invoice submission to the Veterans Affairs Financial Services Center (VAFSC). VAFSC has partnered with Tungsten Corporation e-Invoicing network, for submissions of all electronic invoices to VA. Tungsten Network electronic invoicing is free to all VA vendors. In order to submit electronic invoices, all VA vendors must register with Tungsten Network by submitting an email to Tungsten Network VA.Registration@tungsten-network.com or calling 1-877-752-0900 option 2 for Enrollment. VA s Electronic Invoice (e-Invoice) system uses a third-party contractor (Tungsten Network) for submission of electronic invoices. Go to this website to begin submitting electronic invoices, free of charge: http://www.tungsten-network.com/customer-campaigns/veteransaffairs-us/ For assistance setting up e-Invoice, the below information is provided: Tungsten Network e-Invoice Registration: VA.Registration@tungsten-network.com Tungsten Network e-Invoice Setup Information: (877)752-0900 (Option 2 - Enrollment) Tungsten Network Customer Service: (877)489-6135 OB10 Portal to submit electronic invoices: VA.Registration@ob10.com VAFSC for Invoice receipt or payment questions, call: (877)353-9791 or VAFSC Email: vafsccshd@va.gov FACSIMILE, E-MAIL, AND SCANNED DOCUMENTS ARE NOT ACCEPTABLE FORMS OF SUBMISSION FOR PAYMENT REQUESTS ACKNOWLEDGMENT OF AMENDMENTS: The offeror acknowledges receipt of amendments to the solicitation numbered and dated as follows: AMENDMENT NO DATE ___________ __________ ___________ __________ ___________ __________ CONTRACT ADMINISTRATION The Contracting Officer is the only person authorized to approve changes or modify any of the requirements under this contract. The Contractor shall communicate with the Contracting Officer on all matters pertaining to contract administration. Only the Contracting Officer is authorized to make commitment or issue changes that will affect price, quantity or quality of performance of this contract. In the event the Contractor effects any such change at the direction of any person other than the Contracting Officer, the change shall be considered to have been made without authority and no adjustment will be made in the contract price to cover any increase in cost incurred thereof. B.2 PRICE/COST SCHEDULE ITEM INFORMATION Project timing and hours are only estimates and subject to change due to changes in VA and WPBVAMC priorities. Please use Service Contract Act WD# 2015-4543 Revision #23 12/27/2022. ITEM NUMBER DESCRIPTION OF SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 1.00 JB NSP Please itemized the quote below Contractor will be required to furnish all labor, tools and materials required to replace the main steam header located in the Energy Center of the West Palm Beach VA Healthcare system, 7305 N Military Trail, West Palm Beach, Fla. Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 0001AA 1.00 JB _______________ _______________ Contractor will be required to furnish all labor Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 0001AB 1.00 JB _______________ _______________ Steam Piping: Steel, ASTM A53/A53M, Grade B, seamless or ERW; ASTM A106/A106M Grade B, seamless; Schedule 80. Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 0001AC 1.00 JB _______________ _______________ Steam Condensate and Pumped Condensate Piping: Steel, ASTM A53/A53M, Grade B, seamless or ERW; or ASTM A106/A106M Grade B, seamless, Schedule 80. Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 0001AD 1.00 JB _______________ _______________ Vent Piping: Steel, ASTM A53/A53M, Grade B, seamless or ERW; ASTM A106/A106M Grade B, seamless; Schedule 80, galvanized. Cast iron fittings or piping is not acceptable for steam and steam condensate piping. Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 0001AE 1.00 JB _______________ _______________ Butt welding fittings: ASME B16.9 with same wall thickness as connecting piping. Elbows will be long radius type, unless otherwise noted. Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 0001AF 1.00 JB _______________ _______________ Welding flanges and bolting: ASME B16.5: Steam service: Weld neck or slip-on, raised face, with non-asbestos gasket. Non-asbestos gasket will either be stainless steel spiral wound strip with flexible graphite filler or compressed inorganic fiber with nitrile binder rated for saturated and superheated steam service 400 degrees C (750 degrees F) and 10,342 kPa (1500 psig). Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 0001AG 1.00 JB _______________ _______________ Flange bolting: Carbon steel machine bolts or studs and nuts, ASTM A307, Grade B. Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 0001AH 1.00 JB _______________ _______________ Welded Branch and Tap Connections: Forged steel weldolets, or branchlets and threadolets may be used for branch connections up to one pipe size smaller than the main. Forged steel half-couplings, ASME B16.11 may be used for drain, vent and gauge connections. Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 0001AI 1.00 JB _______________ _______________ Valves Asbestos packing is not acceptable. All valves of the same type will be products of a single manufacturer. Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 0001AJ 1.00 JB _______________ _______________ Gate Valves: 50 mm (2 inches) and smaller: Forged steel body, rated for 1380 kPa (200 psig) saturated steam, 2758 kPa (400 psig) WOG, bronze wedges and Monel or stainless-steel seats, threaded ends, rising stem, and union bonnet. 65 mm (2-1/2 inches) and larger: Flanged, outside screw and yoke. High pressure steam 110 kPa (16 psig) and above system): Cast steel body, ASTM A216/A216M grade WCB, 1035 kPa (150 psig) at 260 degrees C (500 degrees F), 11- 1/2 to 13 percent chrome stainless steel solid disc and seats. Provide 25 mm (1 inch) factory installed bypass with globe valve on valves 100 mm (4 inches) and larger. Valves will be fitted with grease fittings. All other services: Forged steel body, Class B, rated for 850 kPa (123 psig) saturated steam, 1380 kPa (200 psig) WOG, bronze or bronze face wedge and seats, 850 kPa (123 psig) ASME flanged ends, OS&Y, rising stem, bolted bonnet, and renewable seat rings. Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 0001AK 1.00 JB _______________ _______________ Steam Trap: Each type of trap will be the product of a single manufacturer. Provide trap sets at all low points. Trap bodies: Steel, constructed to permit ease of removal and servicing working parts without disturbing connecting piping. The use of raised face flange is required on pipe sizes 1½ inch and above. The use of unions is acceptable for pipe sizes below 1½ inches. Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 0001AL 1.00 JB _______________ _______________ Guides: Provide factory-built guides along the pipeline to permit axial movement only and to restrain lateral and angular movement. Guides must be designed to withstand a minimum of 15 percent of the axial force which will be imposed on the expansion joints and anchors. Contract Period: Base POP Begin: 04-10-2023 POP End: 03-09-2024 GRAND TOTAL _______________ B.3 DELIVERY SCHEDULE ITEM NUMBER QUANTITY DELIVERY DATE 0001 1.00 04-10-2023 - 03-09-2024 0001AA 1.00 04-10-2023 - 03-09-2024 0001AB 1.00 04-10-2023 - 03-09-2024 0001AC 1.00 04-10-2023 - 03-09-2024 0001AD 1.00 04-10-2023 - 03-09-2024 0001AE 1.00 04-10-2023 - 03-09-2024 0001AF 1.00 04-10-2023 - 03-09-2024 0001AG 1.00 04-10-2023 - 03-09-2024 0001AH 1.00 04-10-2023 - 03-09-2024 0001AI 1.00 04-10-2023 - 03-09-2024 0001AJ 1.00 04-10-2023 - 03-09-2024 0001AK 1.00 04-10-2023 - 03-09-2024 0001AL 1.00 04-10-2023 - 03-09-2024 B.4 STATEMENT OF WORK West Palm Beach Veterans Affairs Medical Center 7305 N Military Trail, West Palm Beach, FL 33410 561-422-8262 Statement of Work for Replacement of Boiler Plant Main Steam Header Introduction and Scope of Work Contractor will be required to furnish all labor, tools and materials required to replace the main steam header located in the Energy Center of the West Palm Beach VA Healthcare system, 7305 N Military Trail, West Palm Beach, Fla. All work will be performed IAW the VA steam design manual, the current editions of VA design guides, VA design and construction procedures, and the VA master specifications. Work shall also comply with the provisions of the current edition of ASME B31.1 Code for Pressure Piping. Requirements Overview Contractor shall fabricate and install a new main steam header adjacent to the existing steam header. Existing steam and condensate lines will be rerouted to the new header. Some work will require shut down of the existing boiler plant. This work will need to be done outside normal working hours and should be considered by the contractor when submitting a proposal. Due to the emergency nature of the repairs, all work will need to be completed within 90 days from notice to proceed. Deviation from this deadline will require approval from the Contracting Officer and COR. Contractor will provide submittals for all materials used to the COR for approval. Materials used will meet the following requirements: Steam Piping: Steel, ASTM A53/A53M, Grade B, seamless or ERW; ASTM A106/A106M Grade B, seamless; Schedule 80. Steam Condensate and Pumped Condensate Piping: Steel, ASTM A53/A53M, Grade B, seamless or ERW; or ASTM A106/A106M Grade B, seamless, Schedule 80. Vent Piping: Steel, ASTM A53/A53M, Grade B, seamless or ERW; ASTM A106/A106M Grade B, seamless; Schedule 80, galvanized. Cast iron fittings or piping is not acceptable for steam and steam condensate piping. Butt welding fittings: ASME B16.9 with same wall thickness as connecting piping. Elbows will be long radius type, unless otherwise noted. Welding flanges and bolting: ASME B16.5: Steam service: Weld neck or slip-on, raised face, with non-asbestos gasket. Non-asbestos gasket will either be stainless steel spiral wound strip with flexible graphite filler or compressed inorganic fiber with nitrile binder rated for saturated and superheated steam service 400 degrees C (750 degrees F) and 10,342 kPa (1500 psig). Flange bolting: Carbon steel machine bolts or studs and nuts, ASTM A307, Grade B. Welded Branch and Tap Connections: Forged steel weldolets, or branchlets and threadolets may be used for branch connections up to one pipe size smaller than the main. Forged steel half-couplings, ASME B16.11 may be used for drain, vent and gauge connections. Valves Asbestos packing is not acceptable. All valves of the same type will be products of a single manufacturer. Gate Valves: 50 mm (2 inches) and smaller: Forged steel body, rated for 1380 kPa (200 psig) saturated steam, 2758 kPa (400 psig) WOG, bronze wedges and Monel or stainless-steel seats, threaded ends, rising stem, and union bonnet. 65 mm (2-1/2 inches) and larger: Flanged, outside screw and yoke. High pressure steam 110 kPa (16 psig) and above system): Cast steel body, ASTM A216/A216M grade WCB, 1035 kPa (150 psig) at 260 degrees C (500 degrees F), 11-1/2 to 13 percent chrome stainless steel solid disc and seats. Provide 25 mm (1 inch) factory installed bypass with globe valve on valves 100 mm (4 inches) and larger. Valves will be fitted with grease fittings. All other services: Forged steel body, Class B, rated for 850 kPa (123 psig) saturated steam, 1380 kPa (200 psig) WOG, bronze or bronze face wedge and seats, 850 kPa (123 psig) ASME flanged ends, OS&Y, rising stem, bolted bonnet, and renewable seat rings. Steam Trap: Each type of trap will be the product of a single manufacturer. Provide trap sets at all low points. Trap bodies: Steel, constructed to permit ease of removal and servicing working parts without disturbing connecting piping. The use of raised face flange is required on pipe sizes 1½ inch and above. The use of unions is acceptable for pipe sizes below 1½ inches. Guides: Provide factory-built guides along the pipe line to permit axial movement only and to restrain lateral and angular movement. Guides must be designed to withstand a minimum of 15 percent of the axial force which will be imposed on the expansion joints and anchors. Welding Qualifications: Before any welding is performed, contractor will submit a certificate certifying that welders comply with the following requirements: Qualify welding processes and operators for piping according to ASME BPVC Section IX, AWS Z49.1 and AWS B2.1/B2.1M. Comply with provisions in //ASME B31.9// //ASME B31.1//. Certify that each welder and welding operator has passed AWS qualification tests for welding processes involved and that certification is current and recent. Submit documentation to the COR. All welds will be stamped according to the provisions of the American Welding Society. Fabrication The new steam header piping connections shall match up to the existing steam header. Materials and techniques used for fabrication of new steam header shall comply with VA Master Specifications, the provisions of the current edition of ASME B31.1 Code for Pressure Piping Installation Contractor shall install appropriate piping support and foundation pads as needed to properly support the new steam header and associated piping. Supports shall installed in accordance with VA Master Specifications, and the provisions of the current edition of ASME B31.1 Code for Pressure Piping Contractor shall reroute all existing steam and condensate piping from the old header to the new header. All piping connections shall be made with new valves, gaskets, and associated hardware. New steam vent muffler/silencer with gaskets and associated hardware will be installed. Existing roof penetration can be used but contractor will be responsible for properly sealing around the piping to prevent water intrusion. New warm up / bypass valves with gaskets, and associated hardware will also be installed. New condensate drain piping and valves will be installed to include new steam traps. Relocate the existing steam pressure transmitters to a height and location that allows for readability and provides serviceability. Steam pressure transmitter piping will be installed per the manufacture s installation requirements. Contractor will perform calibration on the relocated steam pressure transmitters. The temporary boiler supply line will be rerouted from boiler 3 to the new supply header and be provided with a new valve, gaskets and associated hardware. Contractor shall install new pipe insulation in all areas where the insulation was disturbed along with all newly installed piping. Pre-formed pipe Insulation: ASTM C533, Type I and Type II with indicator denoting asbestos-free material. Pre-molded Pipe Fitting Insulation: ASTM C533, Type I and Type II with indicator denoting asbestos-free material. Equipment Insulation: ASTM C533, Type I and Type II Demolition Upon successful migration to new steam header, contractor will remove and dispose of old steam header, associated piping, piping supports and foundation pads. Startup and Testing Contractor shall perform a startup operational test in accordance with the VA Boiler Plant operating procedures. Contractor shall perform testing of all operational controls and safety devices related to the work to ensure proper operation. Contractor shall provide COR with documentation of all testing. Additional Contractor requirements Contractor is responsible to maintain the work area in a neat and orderly condition. Contactor shall provide a dumpster for disposal of old materials and any debris generated during the work. Contractor shall ensure the work area is broom clean at the end of each shift. Recommend potential bidders participate in the site visit. Only West Palm Beach VAHCS Personnel are authorized to turn On or Off any electrical circuits or to Open or Shut any valves. SECTION C - CONTRACT CLAUSES C.1 52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): (End of Clause) FAR Number Title Date 52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS DEC 2014 52.212-4 CONTRACT TERMS AND CONDITIONS COMMERCIAL ITEMS OCT 2018 52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS DEC 2013 852.203-70 COMMERCIAL ADVERTISING MAY 2018 852.270-1 REPRESENTATIVES OF CONTRACTING OFFICERS JAN 2008 852.232-72 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS NOV 2018 C.2 52.217-8 OPTION TO EXTEND SERVICES (NOV 1999) The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 15 days of the expiration of this contract. Except when it is determined in accordance with FAR 17.206(b) not to be in the Government s best interests, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. This includes options under FAR 52.217-8, Option to Extend Services, which applies to this solicitation. Evaluation of options under FAR 52.217-8 will be accomplished by using the prices offered for the last option period to determine the price for a 6-month option period, which will be added to the base and other option years to arrive at the total price. Evaluation of options will not obligate the Government to exercise the option(s). NOTE: The specified rates under this clause will be those rates in effect under the contract each time an option is exercised under this clause. (End of Clause) C.3 52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000) (a) The Government may extend the term of this contract by written notice to the Contractor within 5 days; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 7 days before the contract expires. The preliminary notice does not commit the Government to an extension. (b) If the Government exercises this option, the extended contract shall be considered to include this option clause. (c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 4 years. (End of Clause) C.4 VAAR 852.219-10 VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (JUL 2019) (DEVIATION) (a) Definition. For the Department of Veterans Affairs, Service-disabled veteran owned small business concern or SDVOSB : (1) Means a small business concern: (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled Veterans or eligible surviving spouses (see VAAR 802.101, Surviving Spouse definition); (ii) The management and daily business operations of which are controlled by one or more service-disabled Veterans (or eligible surviving spouses) or, in the case of a service-disabled Veteran with permanent and severe disability, the spouse or permanent caregiver of such Veteran; (iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; (iv) The business has been verified for ownership and control pursuant to 38 CFR part 74 and is so listed in the Vendor Information Pages (VIP) database (https://www.vip.vetbiz.va.gov); and (v) The business will comply with VAAR subpart 819.70 and Small Business Administration (SBA) regulations regarding small business size and government contracting programs at 13 CFR part 121 and 125, including the nonmanufacturer rule and limitations on subcontracting requirements in 13 CFR 121.406 and 125.6, provided that any reference therein to a service-disabled veteran-owned small business concern (SDVO SBC), is to be construed to apply to a VA verified and VIP-listed SDVOSB. The nonmanufacturer rule and the limitations on subcontracting apply to all SDVOSB and VOSB set-asides and sole source contracts. (2) Service-disabled Veteran means a Veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). (b) General. (1) Offers are solicited only from eligible service-disabled veteran-owned small business concerns. Only VIP-listed service-disabled veteran-owned small business concerns (SDVOSBs) may submit offers in response to this solicitation. Offers received from concerns that are not VIP-listed service-disabled veteran-owned small business concerns shall not be considered. (2) Any award resulting from this solicitation shall be made to a VIP-listed service-disabled veteran-owned small business concern that meets the size standard for the applicable NAICS code. (c) Representation. By submitting an offer, the prospective contractor represents that it is an eligible SDVOSB as defined in this clause, 38 CFR part 74, and VAAR subpart 819.70. Pursuant to 38 U.S.C. 8127(e), only VIP-listed SDVOSBs are considered eligible. Therefore, any reference in 13 CFR part 121 and 125 to a service disabled veteran-owned small business concern (SDVO SBC), is to be construed to apply to a VA verified and VIP-listed SDVOSB and only such concern(s) qualify as similarly situated. The offeror must also be eligible at the time of award. (d) Agreement. Agreement. When awarded a contract (see FAR 2.101, Definitions), including orders under multiple-award contracts, or a subcontract, an SDVOSB agrees that in the performance of the contract, the SDVOSB shall comply with requirements in VAAR subpart 819.70 and SBA regulations on small business size and government contracting programs at 13 CFR part 121 and 125, including the nonmanufacturer rule and limitations on subcontracting requirements in 13 CFR part 121.406 and 125.6, provided that for purposes of the limitations on subcontracting, only VIP-listed SDVOSBs shall be considered eligible and/or similarly situated (i.e., a firm that has the same small business program status as the prime contractor). An independent contractor shall be considered a subcontractor. An otherwise eligible firm further agrees to the following: (1) Services. In the case of a contract for services (except construction), it will not pay more than 50% of the amount paid by the government to it to firms that are not VIP-listed SDVOSBs. (2) Supplies or products. (i) In the case of a contract for supplies or products (other than from a nonmanufacturer of such supplies), it will not pay more than 50% of the amount paid by the government to it to firms that are not VIP-listed SDVOSBs. (ii) In the case of a contract for supplies from a nonmanufacturer, it will supply the product of a domestic small business manufacturer or processor, unless a waiver as described in 13 CFR 121.406(b)(5) is granted. (3) General construction. In the case of a contract for general construction, it will not pay more than 85% of the amount paid by the government to it to firms that are not VIP-listed SDVOSBs. (4) Special trade contractors. In the case of a contract for special trade contractors, it will not pay more than 75% of the amount paid by the government to it to firms that are not VIP-listed SDVOSBs. (5) Subcontracting. Any work that a VIP-listed SDVOSB subcontractor further subcontracts will count towards the percent of subcontract amount that cannot be exceeded. For supply or construction contracts, cost of materials is excluded and not considered to be subcontracted. For mixed contracts and additional limitations, refer to 13 CFR 125.6. (e) Joint ventures. A joint venture may be considered an SDVOSB if the joint venture is listed in VIP and complies with the requirements in 13 CFR 125.18(b), provided that any reference therein to service-disabled veteran-owned small business concern or SDVO SBC, is to be construed to mean a VIP-listed SDVOSB. A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (d) of this clause will be performed by the aggregate of the joint venture participants. (f) Precedence. For any inconsistencies between the requirements of the SBA program for service-disabled veteran-owned small business concerns and the VA Veterans First Contracting Program, as defined in VAAR subpart 819.70 and this clause, the VA Veterans First Contracting Program requirements have precedence. (End of Clause) C.5 VAAR 852.219-74 LIMITATIONS ON SUBCONTRACTING MONITORING AND COMPLIANCE (JUL 2018) (DEVIATION) (a) This solicitation includes VAAR 852.219-10 VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE (JUL 2019) (DEVIATION) (b) Accordingly, any contract resulting from this solicitation is subject to the limitation on subcontracting requirements in 13 CFR 125.6. The Contractor is advised that in performing contract administration functions, the Contracting Officer may use the services of a support contractor(s) retained by VA to assist in assessing the Contractor's compliance with the limitations on subcontracting or percentage of work performance requirements specified in the clause. To that end, the support contractor(s) may require access to Contractor's offices where the Contractor's business records, or other proprietary data are retained and to review such business records regarding the Contractor's compliance with this requirement. (c) All support contractors conducting this review on behalf of VA will be required to sign an Information Protection and Non-Disclosure and Disclosure of Conflicts of Interest Agreement to ensure the Contractor's business records or other proprietary data reviewed or obtained in the course of assisting the Contracting Officer in assessing the Contractor for compliance are protected to ensure information or data is not improperly disclosed or other impropriety occurs. (d) Furthermore, if VA determines any services the support contractor(s) will perform in assessing compliance are advisory and assistance services as defined in FAR 2.101, Definitions, the support contractor(s) must also enter into an agreement with the Contractor to protect proprietary information as required by FAR 9.505-4, Obtaining access to proprietary information, paragraph (b). The Contractor is required to cooperate fully and make available any records as may be required to enable the Contracting Officer to assess the Contractor's compliance with the limitations on subcontracting or percentage of work performance requirement. (End of clause) 36C24823Q0247 Page 1 of 1 Page 1 of Page 26 of 26 Page 1 of 1 Page 1 of SECTION D - CONTRACT DOCUMENTS, EXHIBITS, OR ATTACHMENTS SECTION E - SOLICITATION PROVISIONS E.1 ADDENDUM to FAR 52.212-1 INSTRUCTIONS TO OFFERORS COMMERCIAL ITEMS Provisions that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The following provisions ar...
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/08545288bec0472ba7dfa3fcaff90e14/view)
- Place of Performance
- Address: West Palm Beach VA Medical Center 7305 North Military Trail Palm Beach Gardens FL 33410-6400, USA
- Zip Code: 33410-6400
- Country: USA
- Zip Code: 33410-6400
- Record
- SN06622307-F 20230319/230317230111 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |