SOLICITATION NOTICE
17 -- Improved Low Loss Launch Valve Left Hand (LH) and Right Hand (RH) Plugs
- Notice Date
- 3/13/2023 1:56:15 PM
- Notice Type
- Presolicitation
- NAICS
- 333998
—
- Contracting Office
- NAVAIR WARFARE CTR AIRCRAFT DIV JOINT BASE MDL NJ 08733 USA
- ZIP Code
- 08733
- Solicitation Number
- N68335-23-R-0163
- Response Due
- 3/30/2023 1:00:00 PM
- Point of Contact
- Jeff Chelston, Phone: 2405775754
- E-Mail Address
-
jeffrey.m.chelston.civ@us.navy.mil
(jeffrey.m.chelston.civ@us.navy.mil)
- Description
- The Naval Air Warfare Center Aircraft Division (NAWCAD), Lakehurst in support of the Prototype, Manufacturing, and Test Department intends to solicit, negotiate, and award, on a sole source basis a total of (7) Improved Low Loss Launch Valve (ILLLV) Left Hand (LH) Plugs, P/N 626727-6, and seven (7) Improved Low Loss Launch Valve (ILLLV) Right Hand (RH) Plugs, P/N 626725-6. The ILLLV Plug is a designated Aircraft Launch and Recovery Equipment Critical Safety Item.� DFARS 209.270-3(a) states, �The head of the contracting activity responsible for procuring an aviation or ship critical safety item may enter into a contract for the procurement, modification, repair, or overhaul of such an item only with a source approved by the head of the design control activity."" Technical Data Requirements (TDR) 21-17032 regarding the procurement of the ILLLV RH Plugs and TDR 21-17033 regarding the procurement of ILLLV LH Plugs identifies only one approved source, Pre-Mach Inc. in York, PA (CAGE: 5S946).� In order to award to any other company than Pre-Mach Inc., an engineering and quality assurance audit would need to be performed on an interested company.� The audit process generally takes twelve (12) months, which is an unacceptable delay to contract award and delivery. All responsible sources shall meet all technical and quality assurance requirements detailed in the drawings listed below as well as the Technical Data Requirements (TDR) 21-17032 and 21-17033, and (Quality Management 1006) QM1006. Drawing 629303 Revision A: Plug, Weldment & Rough Machining (for P/N 626727-6 and 626725-6) Drawing 626725-6 Revision D: Plug, RH Thread Drawing 626727-6 Revision D: Plug, LH Thread For companies interested in becoming an approved source, a Source Approval Request (SAR) is necessary, which involves the submission of a SAR package.� Please contact Jeff Chelston at the e-mail address identified in this post for more information about the SAR package and approval process. The referenced drawings contain technical data whose export is restricted by the Arms Export Control Act.� In order for companies who are interested in becoming a qualified source to obtain the technical drawings, interested vendors must forward a current, approved DD Form 2345 ""Military Critical Technical Data Agreement"" to Jeff Chelston, Contract Specialist, via the e-mail specified in this notice. �A submitted DD Form 2345 will be validated as being current with the Defense Logistics Agency's Logistics Information Service � Joint Certification Program. �Drawings will be only provided to the individual identified as the data custodian on the approved form. THIS IS NOT A REQUEST FOR PROPOSALS.� The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under the authority of 10 USC 3204(a)(1), Only one responsible source and no other supplies or services will satisfy agency requirements. �A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. �Responses must be received by the response date and time of this notice. �RESPONSES BY PHONE OR FAX WILL NOT BE ACCEPTED
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/97601dcc46f84d2680c69c7a37d9605c/view)
- Record
- SN06616196-F 20230315/230313230109 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |