SOLICITATION NOTICE
T -- U.S. Coast Guard Recruiting Vehicle Branding
- Notice Date
- 12/28/2022 10:15:15 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 323111
— Commercial Printing (except Screen and Books)
- Contracting Office
- Customer Services Washington DC 20401 USA
- ZIP Code
- 20401
- Solicitation Number
- 647-362(2023)
- Response Due
- 1/17/2023 11:00:00 AM
- Archive Date
- 02/01/2023
- Point of Contact
- James Hunt, Phone: 214-767-0451 x5, Beth Rich, Phone: 404-605-9160 x2
- E-Mail Address
-
jhunt@gpo.gov, erich@gpo.gov
(jhunt@gpo.gov, erich@gpo.gov)
- Description
- U.S. Coast Guard Recruiting Vehicle Branding PRODUCT: Complete vinyl/laminate wraps for the U.S. Coast� Guard Recruiting Command vehicle fleet. QUANTITY: 75 total vehicles located in 24 states within the continental United States. There are no graphic removal requirements. See DESCRIPTION for breakdown. DESCRIPTION: USCG Recruiting Office full vehicle wraps to include front, sides, back of vehicle plus all windows excluding driver/passenger side windows and front windshield. Only the tops of the sedans (29) will be wrapped. The tops the remaining vehicles (See below) �will not be wrapped; however, the side wrap may extend above each door to complete the image. Vehicles are broken down into the five (5) general vehicle types (based on vehicle size) used by the agency. There are actually nine (9) different vehicles types. Minivans, 31 (Dodge Caravan and Ford Transit); Sedans, 29 (Ford Fusion and Hyundai Sonata); SUVs, 12 �(Ford Escape and Ford Explorer); Pickups, 2� (Dodge 1500 and Chevy 1500); and Full size van, 1 (Chevy GS3500). Contractor will determine the total cost of preparing, printing both body and window wraps for each vehicle based on the provided vehicle descriptions, types and vin numbers. See Atch B-E, pages 11-14. PRINTING: All graphics print face only in four color process. Copy is text, reverses, solids, gradients, line art illustrations, photographs with 90-100% coverage and full bleeds. The graphics will cover the entire vehicle excluding the windshield, driver�s and passenger side window areas. Side and rear window wraps will be viewed from the outside with a clear view of the outside from inside. Body wraps will be opaque. Contractor MUST use UV inks for this contract (Fade Resistance: The inks used must not show any appreciable change in color after exposure in an Atlas Fadeometer for 680 standard fading hours or its equivalent). After printing, and prior to installation, all graphics will be covered with a clear protective, fade resistant OPTICALLY CLEAR over laminate with a minimum thickness of 2 mil, per printed material manufacturer's recommendations. Products will be produced via inkjet wide format digital printing provided that Quality Level 3 standards are maintained. Final output must be wet ink, pigment-based with an output minimum resolution of 1440 x 720 dpi plus a RIP that provides an option for high quality color matching such as Device Links Technology and/or ICC Profiles. Dry ink/toner printing is not acceptable.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/aa0b39d7443b4a7d8637d5aa4c9ba0e1/view)
- Record
- SN06552800-F 20221230/221228230106 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |