SAMDaily.us | PRESOL | 51 | 51--Recce Kit

SAMDAILY.US - ISSUE OF DECEMBER 11, 2022 SAM #7687
SOLICITATION NOTICE

51 -- 51--Recce Kit

Notice Date: 12/9/2022 12:45:33 PM
Notice Type: Combined Synopsis/Solicitation
NAICS: 339999 — All Other Miscellaneous Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: FBNC23AML0055
Response Due: 12/15/2022 10:30:00 AM
Archive Date: 06/13/2023
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is FBNC23AML0055 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 339999 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-12-15 13:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Fort Bragg, NC 28310 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Badger Ordnance Slick-H for Hensoldt Spotter 45, or equal. The Badger Ordnance SLICK-H or Snipers Lightweight Integrator Combat Kit fits Hensoldt (or Zeiss) Spotter 45/60 spotting scopes. It provides 4 picatinny rails hard-mounted directly to the 3, 6, 9, and 12 o'clock positions as well as an additional 3 mounting positions at 45� angles of the objective ring. The S.L.I.C.K.-H. is also equipped with a removable, folding UNS/Thermal rail that can be adjusted for either left hand or right hand fold. The UNS/Thermal rail features a positive mechanical lock that can be quickly disengaged by simply pulling out on the rail and rotating to either the deployed or stowed position. The S.L.I.C.K.-H. also include a rapidly adjustable rail grabber with a 1/4-20 threaded hole as well as an included Arca-Swiss adapter plate., 3, EA; LI 002: Badger Ordnance S.L.I.C.K. Mount, or equal. The Badger Ordnance SLICK-H or equal. Snipers Lightweight Integrator Combat Kit fits Hensoldt (or Zeiss) Spotter 45/60 spotting scopes. It provides 4 picatinny rails hard-mounted directly to the 3, 6, 9, and 12 o'clock positions as well as an additional 3 mounting positions at 45� angles of the objective ring. The S.L.I.C.K.-H. is also equipped with a removable, folding UNS/Thermal rail that can be adjusted for either left hand or right hand fold. The UNS/Thermal rail features a positive mechanical lock that can be quickly disengaged by simply pulling out on the the rail and rotating to either the deployed or stowed position. The S.L.I.C.K.-H. also include a rapidly adjustable rail grabber with a 1/4-20 threaded hole as well as an included Arca-Swiss adapter plate., 6, EA; LI 003: RRS TFCT Mk2-Really Right Stuff: TFCT MK2 Tripod 34L w/ Anvil-30 ARC Head Or equal. Number of Leg Sections: 4 Load Capacity 1st Position Fully Extended: 80lbs/ 36kg Load Capacity 2nd Position Fully Extended: 45lbs/ 20kg Load Capacity 3rd Position Fully Collapsed: 65lbs/ 29kg 1st Position Maximum Height: 71.1""/ 181cm 1st Position Minimum Height: 24.6""/ 62cm 1st Position 3/4 Segments Extended: 54.4""/ 138cm 2nd Position Maximum Height: 49.7""/ 126cm 2nd Position Minimum Height: 18.1""/ 46cm 3rd Position Minimum Height: 6.7""/ 17cm Folded Length: 26.6""/ 68cm Folded Diameter: 4.1""/ 10.4cm Weight: 5.50lbs/ 2495g, 6, EA; LI 004: RRS Anvil-30, or equal. -Lock R-LOCK (short for Rapid-Lock) System adds unique safety-stop features which are built in to both a mounting rail and quick-release clamp that adhere to the RRS 1.5� Standard. The advantage of the System is the user has multiple �hard-stop� positions along the rail while retaining smooth edges and corners for maximum ergonomics and a snag-free interface that is inherently resistant to wearing down. The ""hard-stop"" feature is comprised of a 5mm diameter steel pin that engages 5.5mm diameter holes in the rail. In addition to supplementing the traditional friction-based clamping mechanism, the interface prevents unintentional repositioning of the rail within the clamp when the R-LOCK is engaged. � Adjustable clamp jaw allows compatibility with many other arca-type rails that are not in spec with the RRS 1.5"" Dovetail Standard � Patent Pending Dual lever-release clamp for fast and easy mounting on RRS Dovetail and Picatinny sections � Ergonomic design gives superior handling and unsurpassed reliability � Stronger, lighter, faster than anything we have seen on the market � Re-positional lever-release for a variety of situations � Highly visible level embedded in both front and back sides of the main ball body for left and right-handed users � Laser-engraved millimeter scale offers precise centering and positioning within the clamp jaw � All components are of the finest RRS quality, machined from solid aircraft aluminum or stainless steel for maximum durability and minimum weight Load Capacity: 35 ft-lbs/kg Height: 2.67""/ 6.78cm Width: 2.51""/ 6.37cm Length: 2.85""/ 7.23cm Ball Diameter: 30mm Tripod Mount: 3/8""-16 Weight: 15.2oz/ 433g, 6, EA; LI 005: Ascend 14, or equal. The Ascend-14 tripod is a compact, all-in-one support package available in two sizes: 14�which favors a minimum stowed profile, ideal for packing in a carry-on bag, and 14L�which provides an extended working height while still being compact enough when collapsed to easily fit in a backpack. For an all-in-one package, look to the integrated ball head that nests into the apex. If you already own one of our ball heads, or any other head with a 3/8"" mounting socket, a platform version of the Ascend-14 is offered as well. Instead of the integrated ball head, there is a general use traditional platform with mounting-stud. Triangular center column for an overall smaller package Integrated 22mm ball head Independent panning clamp Repositionable drop notch Integrated hex key storage Spirit levels on the clamp and apex A more durable magnetic pulltab mechanism 4 angle stop positions Lever controlled center column Removable and reversible center column Quick, tool-less detachable center column Indexable column safety stop Weight hanging hook Weight hanging loop within column (for use in lightweight mode) Column safety stop within column (for use in lightweight mode) 1/4-20 accessory socket on apex Integrated QD socket on apex High strength to weight ratio Made from CNC-machined 6061-T6 Aluminum Mark II improved twist locks, 6, EA; LI 006: Eclipse NVG, or equal. The Tarsier Eclipse � is the most advanced Night Vision Goggle (NVG) accessory on the market, allowing the operator to see objects from 3"" to infinity at the same time and without loss of clarity. It incorporates a smooth action, high performance optical iris that can quickly be adjusted depending on the amount of ambient light. Additionally, the Tarsier Eclipse � offers a high-quality Corning Glass sacrificial lens that can quickly be replaced without tools. The sacrificial lens serves as a critical piece of protection for your NVG lenses, shielding them from dust, dirt or scratching that may cause expensive repairs and potential downtime. Provides the ability to see objects at all distances without adjusting the focus on Night Vision Goggles. Infinitely variable from open to close to allow the optimal amount of light into the NVGs and maintain auto-focus capability. Clear front sacrificial lens to protect lens of NVGs and prevent dust and debris from entering apparatus. Rapid adaptation to ambient light by turning the adjustment ring, opening or closing the iris. Easy and secure attachment to end of NVGs. Material: Harden Rubber Total Weight: 1.1oz (31 grams) Dimensions: 1"" x 2"" x 2"" 33mm Outer diameter needs Part Number: 880021-2 or 880021-GROUND, 24, EA; LI 007: Sticky Game Changer, standard, or equal. The Sticky Game Changer� is born and here to take your stability up a notch or two. Derived from the superior stability offered from our exclusive waxed canvas shell, we applied our new sticky textile to strategic areas of the Game Changer� including the gusset, top, and a single side. The sticky textile provides shooters an unparalleled coefficient of friction to areas that contact shooting props, however the textile is not plagued with the ultraviolet light sensitivity that breaks down common non-slip fabrics over time. Offered in both OG and Pint-sized configurations, the underlying waxed canvas shell is reinforced on specific panels with this indescribably sticky textile to provide a new perspective on what a shooting bag can do for you. Specifications: � Waxed Canvas fabric shell comprises the main body in Tan color Licensed Sticky fabric panels integrated in Graphite color Pint-Sized Sticky Game Changer� Attributes: Dimensions: 7�L x 4.5�w x 5�T Weight: 5 lbs. Handle: Single 1� Tan Wedding Handle Fill Type: Micro silica � Sticky Game Changer� OG Attributes: Dimensions: 10""L x 7""T x 6""W Weight: 6+ lbs. Handle: Double 1.5� Tan Wedding Handles Fill Type: Polypropylene or the new Git Lite lightweight fill. Zippered access to adjust fill to user desired ratio �, 10, EA; LI 008: Fat Bag, milticam, medium, or equal. Armageddon Gear�Fat Bags are an ultralight and versatile solution to a rifleman's need for weapon and body support in the field and on the range. The Fat Bags feature a Cordura nylon outer shell filled with airweight beads. Medium and Large sizes feature dual elastic straps with Milspec Velcro for attachment to yourself or your equipment and include a Bungee Gear Lanyard and ITW Nexus Tac Link to allow easy attachment to belt loops or equipment and easy use in a variety of positions without the need to remove the tether. No other support bag offers the combination of light weight, convenience, security and speed of the Fat Bags from Armageddon Gear! Available in three sizes; a rectangular medium Fat Bag, a tapered-rectangle large Fat Bag, and a tapered-rectangle ""BIG ASS"" size The Big-Ass size is pictured with 5rd and 10rd AICS mags (not included) for perspective. Big Ass Fat Bag does not come with a bungee lanyard or ITW Nexus Tac Link, but does include a shoulder strap (see image of Multicam bag). Medium Fat Bag weighs only 7.4 oz Large Fat Bag weighs only 11oz Big-Ass Fat Bag weighs only 21oz Medium is 9""w x 10""l x 4.5thick, 10, EA; LI 009: Squishy Bag, Multicam, medium or equal. Armageddon Gear�Fat Bags are an ultralight and versatile solution to a rifleman's need for weapon and body support in the field and on the range. The Fat Bags feature a Cordura nylon outer shell filled with airweight beads. Medium and Large sizes feature dual elastic straps with Milspec Velcro for attachment to yourself or your equipment and include a Bungee Gear Lanyard and ITW Nexus Tac Link to allow easy attachment to belt loops or equipment and easy use in a variety of positions without the need to remove the tether. No other support bag offers the combination of light weight, convenience, security and speed of the Fat Bags from Armageddon Gear! Available in three sizes; a rectangular medium Fat Bag, a tapered-rectangle large Fat Bag, and a tapered-rectangle ""BIG ASS"" size The Big-Ass size is pictured with 5rd and 10rd AICS mags (not included) for perspective. Big Ass Fat Bag does not come with a bungee lanyard or ITW Nexus Tac Link, but does include a shoulder strap (see image of Multicam bag). Medium Fat Bag weighs only 7.4 oz Large Fat Bag weighs only 11oz Big-Ass Fat Bag weighs only 21oz Medium is 9""w x 10""l x 4.5thick Large is 9""w x 11""l and tapered from 4""-7"" thick Big Ass is tapered from 13"" to 10"" tall x 13""w x 8.5"" thick, 24, EA; LI 010: Garmin Foretrex� 701 Ballistic Edition, or equal. Durable, constructed to military standards (MIL-STD-810G); night vision goggle compatible Works with GPS, GLONASS and Galileo satellite systems to provide accurate positioning Know where you are with navigation sensors, including 3-axis accelerometer, 3-axis compass and a barometric altimeter; smart notifications� allow your device to receive emails, texts and alerts Foretrex 701 adds Applied Ballistics Elite� software that calculates aiming solutions for long-range shooting Battery life exceeds 48 hours in navigation mode, up to 1 week in UltraTrac� mode and up to 1 month in watch mode DIMENSION 2.9"" x 1.7"" x 0.9"" DISPLAY SIZE 2.0"" diagonal DISPLAY RESOLUTION 200 x 128 pixels DISPLAY TYPE high-resolution 4-color gray WEIGHT 3.1 oz with batteries WATERPROOF IPX7 BATTERY TYPE 2 AAA batteries (not included) BATTERY LIFE Exceeds 48 hours in GPS mode Up to 1 week in UltraTrac� mode Up to 1 month in watch mode MIL-STD-810 yes (thermal, shock, water) INTERFACE micro USB Maps & Memory WAYPOINTS/FAVORITES/LOCATIONS 500 TRACKS 100 NAVIGATION TRACK LOG 10000 NAVIGATION ROUTES 50 Sensors HIGH-SENSITIVITY RECEIVER GPS GLONASS GALILEO BAROMETRIC ALTIMETER COMPASS Yes (tilt-compensated 3-axis) GPS COMPASS (WHILE MOVING) Daily Smart Features SMART NOTIFICATIONS ON HANDHELD VIRB� REMOTE PAIRS WITH GARMIN CONNECT� MOBILE Outdoor Recreation POINT-TO-POINT NAVIGATION TRACBACK� AREA CALCULATION HUNT/FISH CALENDAR SUN AND MOON INFORMATION BALLISTICS CALCULATOR Connections CONNECTIONS WIRELESS CONNECTIVITY yes (BLUETOOTH�, ANT+�), 24, EA; LI 011: MDT CKYE-POD Triple Pull, or equal. Single-handed adjustment Provides ultimate traction with spiked feet (Compatible/interchangeable with other brands of feet in the Standard and PRS Short legs) Crafted from hard anodized aluminum 170 degrees of cant - Now with tension adjustment knob 360 degrees of pan (on most models) - Now lockable Quick release push button Picatinny mount OR Quick adjust ARCA / RRS dovetail mount RRS mount requires the purchase of a compatible clamp from Really Right Stuff, like the SC-LR Separate tension adjustments for pan and cant features Built-in barricade stop Tumble deburred for a smooth tactile feel Four leg length options: PRS Short (approx. 7.5"" collapsed, 13"" extended) Standard (approx. 9"" collapsed, 15"" extended) Double Pull (approx. 9"" collapsed, 18.5"" extended) Triple Pull (approx. 14.5"" collapsed, 36"" extended) Weight: starting from 21 oz., 4, EA; LI 012: SC-ARC adaptor, or equal. R-Lock� (short for Rapid-Lock�) System adds unique safety-stop features which are built in to both a mounting rail and quick-release clamp that adhere to the RRS 1.5� Standard. The advantage of the System is the user has multiple �hard-stop� positions along the rail while retaining smooth edges and corners for maximum ergonomics and a snag-free interface that is inherently resistant to wearing down. The �hard-stop� feature is comprised of a 5mm diameter steel pin that engages 5.5mm diameter holes in the rail. In addition to supplementing the traditional friction-based clamping mechanism, the interface prevents unintentional repositioning of the rail within the clamp when the R-LOCK� is engaged. Easy Top-Loading: In one quick action, the clamp can go from closed to fully open, allowing easy top-loading of RRS Dovetail and arca-swiss compatible quick-release plates; no more lost shots while fumbling to feed the plates into the end of the clamp Visual Confirmation of Lock Position: You can readily observe if the lever is locked, half-open or fully open Jaw Length: 1.97""/ 50mm Width: 2.94""/ 74.6mm Height: 0.7""/ 17.4mm Weight: 3.8oz/107g including hardware, 4, EA; LI 013: ARCALOCK rail for Barrett, MK22, or equal. � Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Serrations are not sharp, will not damage bags or your hands. � Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp � Rail is specifically built to run the full length of a new Barrett MRAD forend, stopping right at the end of the handguard. � Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work � No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way. � Designed to attach to the rifle up to 4 places for maximum strength and stability. � Type 3 Hard Coat anodized in FDE for additional durability. � Made from 6061-T6 Aluminum � Made in-house here in the USA from USA sourced Aluminum, 4, EA; LI 014: PELTOR 3M ComTac VI NIB Headset - Dual DL, coyote brown, or equal. The 3M PELTOR ComTac VI NIB Hearing Defender is a reliable, rugged solution you can count on. With noise-canceling microphones, high fidelity speakers, and advanced digital signal processing, the ComTac VI headset provides a premier listening and communicating experience, both in and out of noise.image Two versions of this headset are available for purchase in the United States. This single frequency version is FCC approved and intended for use in the United States and Canada (as the NIB wireless technology operates on the approved 915.5 MHz frequency band). The other version, MT20H682BB-09N GN, can operate on either the 915.5 MHz or the 864 MHz frequency bands but is solely for U.S. Federal Government use in the United States. Natural Interaction Behavior (NIB): Short-range, headset-to-headset communication in high noise environments without the use of an external communications radio. The NIB function allows for 4 team members to speak simultaneously and over 60 people to listen within a 5 meter radius. Audio transmit is activated by either a voice activated switch (VOX) for hands-free operation or by a push-to-talk button. A tactile button on the left ear cup easily allows the user to turn the VOX function on or off. Mission Audio Profiles (MAP): Advanced environmental listening settings that optimize the amplitude and frequency for specific conditions. The Mission Audio Profiles have been designed with a variety of combat and combat support operations in mind. The environmental listening feature, also known as Talk-Through, uses a proprietary digital audio circuit that allows safe audio sounds to bypass the hearing protection while still helping protect against harmful noises. Advanced environmental listening modes (Mission Audio Profiles or MAP) that optimize the auditory experience based on specific external conditions Environmental microphones for level-dependent hearing protection and auditory situational awareness Helps provide hearing protection when exposed to hazardous noise NIB (Natural Interaction Behavior) wireless technology enables peer-to-peer headset communication Protective communication solution for clear communication in noisy environments Rugged 3M PELTOR Design for trusted performance Water and dust-proof noise-cancelling microphone (IP68) for clear speech transmission in noisy and harsh environments, 115, EA; LI 015: PELTOR Accessory Rail Headset Connectors ARC Color: Black, or equal. M PELTOR ARC Adapters, Left & Right Side Attachment Kit, Conversation Kit to fit the FAST Helmet Rail Connection systemimage The 3M PELTOR Brand is a respected global leader in hearing protection and communication solutions. With production facilities in several countries including the US, 3M PELTOR supplies both traditional over the ear and innovative in-ear solutions to industry worldwide as well as elite tactical military teams and law enforcement. The PELTOR brand is built tough for the working professional. eft and right guide arm attachments for mounting the headset onto a helmet rail system Accessory Rail Connector (ARC), 115, EA; LI 016: Shipping and Handling, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerors that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. Reporting During Contract Performance Equal Opportunity
Web Link: SAM.gov Permalink
(https://sam.gov/opp/98d59789ed144fa18f0ce1c5e3a83ea8/view)
Place of Performance: Address: X6066 African Lion Blvd ATTN: PBO/ CW2 Pleitez, Fort Bragg, NC 28310, USA; Zip Code: 28310; Country: USA
Record: SN06540287-F 20221211/221213085134 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

51 -- 51--Recce Kit