SOLICITATION NOTICE
20 -- Repair Kit, Rod and Seal
- Notice Date
- 12/6/2022 5:16:56 AM
- Notice Type
- Solicitation
- NAICS
- 332510
— Hardware Manufacturing
- Contracting Office
- SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
- ZIP Code
- 94501
- Solicitation Number
- 70Z08523QAN026B00
- Response Due
- 12/21/2022 9:00:00 AM
- Archive Date
- 12/22/2022
- Point of Contact
- Jeremy Washington, Phone: 4107626104, Kimberly Borroni, Phone: 4107626696
- E-Mail Address
-
Jeremy.C.Washington@USCG.mil, Kimberly.K.Borroni@uscg.mil
(Jeremy.C.Washington@USCG.mil, Kimberly.K.Borroni@uscg.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- Line No 1. NSN: 2040-01-496-9422 Part No: FL-2605-29 PC37 DESC: REPAIR KIT, ROD AND SEAL QTY 18 EA Line No. 2 NSN: 3040-01-496-9424 Part No: 4.00CC-2HLTS24AC16.00 Desc: CYLINDER ASSY, ACTUATING, LINEAR QTY 10 EA Line No. 3 NSN: 5315-01-515-9868 Part No: FL-2605-13 SHT 5 Desc: PIN,STRAIGHT, HEADLESS QTY: 04 EA Line 1: REPAIR KIT, ROD AND SEAL, MANUFACTURED IN ACCORDANCE WITH SFLC SPECIFICATION P-573-0502 WITH THE FOLLOWING MODIFICATION: THE CONTRACTOR SHALL NOT DRILL THE 3/4 INCH HOLE THROUGH THE EXTENSION ROD AS INDICATED ON DETAIL 51-C OF USCG DRAWING FL-2605-29 REV. L SHEET 7 (ELEVATION ZONE 51D). THIS HOLE WILL BE DRILLED IN THE FIELD AT TIME OF INSTALLATION. SEE SFLC SPEC P-573-0502, CHANGE 3 FOR PACKAGING, MARKING AND BAR CODING REQUIREMENTS. PRESERVATION, PACKING, & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS: SFLC SPECIFICATION P-573-0502 CHANGE 3 DATED: 10/30/17 EACH KIT PACKED IN ITS OWN BOX AND MARKED. Line 2: CYLINDER ASSY, ACTUATING, LINEAR BUILD TO SERIAL # FF346811 B PARKER SERIES 2H, HYDRAULICALLY OPERATED, SIDE LUG MOUNTING STYLE, 4 INCH BORE DIAMETER, 2.5 INCH ROD DIAMETER, 16 INCH STROKE LENGTH, SINGLE ROD END, SYSTEM OPERATING PRESSURE: MAX300 PSI, MIN 200 PSI. END SUPPORT CASE IS FIXED AND RIGIDLY GUIDED, PISTON SEAL TYPE: LIPSEAL CLASS1 NITRILE, POLYURETHANE (STANDARD). INLET AND OUTLET PORTS#12 SEA STRAIGHT THREAD O-RING, PISTON ROD STUD TO HAVE 1 7/8-12 TYPE A UNF STANDARD THREADS, HEAD END AND CAP END TO HAVE PORT IN POSITION 1, CUSHION IN POSITION 2, AND AIR BLEEDS IN POSITION 4. ROD GLAND ASSEMBLY SEAL CONSISTING OF 1 EACH LIPSEAL AND 1 EACH WIPER SEAL. CYLINDER HOUSING-STEEL TUBING: PISTON ROD-CHROME PLATED CARBON STEEL. INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1 E METHOD 10, CUSHIONED IN A DOUBLE LAYER OF 3/4 IN BUBBLE WRAP AND PACKED IN AN APPROPRIATELY SIZED ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX. MARKING IAW MIL-STD-129R. PRESERVATION, PACKING, & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS: SEE DESCRIPTION SPEC DATA DATED: 11/08/22 SEE DESCRIPTION SPEC DATA Line 3: LEVEL WIND PIVOT PIN. MANUFACTURE IAW DRAWING FL-2605-13 REVISION C, SHEETS 1, 5 AND 6. RUNOUT TOLERANCE SHALL BE HELD TO +/-.001"" ON THE 8"", 8 1/4"" DIAMETERS AND FLANGE FACE. QA INSPECTION SHALL CONSIST OF: 100% DIMENSIONAL, SURFACE FINISH AND RUNOUT READINGS. THERE WILL BE NO ACCEPTANCE OUTSIDE OF THE DIMENSIOANL CONFORMANCE AS WE HAVE TRIED THIS IN THE PAST AND HAS CREATED PROBLEMS. END ITEM IDENTIFICATION : BUOY CHAIN WINCH ASSEMBLY, P/N CW1 ABOARD 225 FT WLB, 175 FT WLM, AND 240 FT WLBB GLIB PROJECT COAST GUARD VESSELS NO WAIVERS WILL BE GRANTED FOR THESE ITEMS!!!! PRESERVATION, PACKING, & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS: SEE DESCRIPTION DATED: 11/08/22 PACKAGE AND MARK INDIVIDUALLY. �- NO SUBSTITUTIONS.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/66d27cb1092f4c15be5939dee2c5da8b/view)
- Record
- SN06536152-F 20221208/221206230056 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |