SAMDaily.us | PRESOL | 73 | 73--Field Feeding Kitchen Equipment

SAMDAILY.US - ISSUE OF OCTOBER 30, 2022 SAM #7639
SOLICITATION NOTICE

73 -- 73--Field Feeding Kitchen Equipment

Notice Date: 10/28/2022 8:29:12 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 335220 — Major Household Appliance Manufacturing
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: 99THG4TRANKIT40
Response Due: 11/16/2022 2:00:00 PM
Archive Date: 05/15/2023
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 99THG4TRANKIT40 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-08. The associated North American Industrial Classification System (NAICS) code for this procurement is 335220 with a small business size standard of 1,500.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-11-16 17:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be JMDL, NJ 08640 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Commercial Food Slicer.............electric, medium duty, 8-1/2"" tempered chrome blade, adjustable slice thickness (0-19/32""), tilt-out carriage, belt-driven ventilated motor, cast aluminum base, silver exterior, 3/4 HP, 120/60/1-ph, 1.1 amps, cord with NEMA 5-15P, NSF -A commercially rated 3/4 peak HP* motor is the power behind Waring's WCS220SV medium-duty food slicer. Made in Italy, with an 8.5"" tempered, hard chrome blade that retains its sharp cutting edge and adjusts thickness from 0 to .59 in. to perform a wide range of slicing tasks. The sturdy base and tilt-out carriage design with removable blade make operation and cleanup exceptionally easy, 2, EA; LI 002: Break room refrigerator.............-freezer with stainless steel doors and NIST calibrated alarm/thermometers 67.25"" x 29.63"" x 30"" (H x W x D) 18 cu.ft., 2, EA; LI 003: Aluminum and Stainless Steel Bottom Mount Reach-In Refrigerator........(2) Doors, 49 cu ft, 54""W x 32 7/10""D x 82 7/10""H, (6) Heavy Duty Baked Epoxy Shelves, Solid State Thermostat w/Digital Display, Temp Range 34F to 38F, Self-Closing Door Remains Open Past 90 degrees, EZ Slide Out Condenser, Full Length Integrated Door Handle, Heavy Duty Casters w/(2) Brakes, S/S Front, Sides & Top, Aluminum Back, 115V/60/1, 5.7 Amps, 2, EA; LI 004: KM-350MAJ/B-300SF - 489 LB AIR COOLED CRESCENT CUBE ICE MACHINE W/ 300 LB BIN - Ice machine 28 in (H) x 22 in (W) x 27 3/8 in (Depth) � Crescent cube style � Approximately 489 lb production per 24 hrs � Durable stainless steel exterior � Air cooled � Self contained condenser � Ever Check� alert system � H-GUARD Plus antimicrobial agent � Cycle Saver� design � 300 lb storage bin capacity � Stainless steel exterior � Front opening bin door � R-404a Refrigerant � 115V/60Hz/9.5A/1-Ph � 3 year parts and labor warranty on entire machine � 5 year parts and labor warranty on evaporator � 5 year parts warranty on compressor & air cooled condenser, 3, EA; LI 005: Tilting Kettle........direct steam, 30-gallon capacity, crank tilt, 2/3 jacket, 316 stainless steel liner, tri-leg base, stainless steel construction, flanged feet, 25 PSI (gas), 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. For solicitation with multiple CLINs, each individual CLINs shall be priced and submitted on Unison Marketplace. Pricing for multiple CLINS shall not be lumped into one line item. Doing so will place your quote in the Unacceptable (not to be considered for award) status. CLINs with $0 dollar shall be identified as Not Separately Priced (NSP). This solicitation requires an active registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. This solicitation is being released in Unison Marketplace for competition. In order to submit a quote, you must register, and/or log into Unison Marketplace to submit your quotes in accordance with their guidance. No quotes will be accepted outside of the Unison Marketplace site. Please log onto www.UnisonMarketplace.com to submit your quote. The Government�s selection for award will be made via reverse auction to the Lowest Priced Technically Acceptable (LTPA) BPA holder. The Government anticipates award of a Firm Fixed Price (FFP) purchase order. In addition to providing pricing at www.UnisonMarketplace.com for this solicitation, each BPA Holder shall provide any required, NSP responses (e.g. technical proposals, representations and certifications, etc.). You may attach documents with your offer when submitting a quote. After you begin the quote process the attachment feature is located on the 2nd page �Line Items� or you may submit them to MarketplaceSupport@unisonglobal.com to supplement your quote. Failure to provide any required documents prior to the proposal due date and time will deem your offer non-responsive and ineligible for award. The Government intends to make an award to the BPA Holder who submits the lowest price, technically acceptable quote that meets all minimum Statement of Work and delivery schedule requirements. Quotes must be on all the parts and full quantities identified. Bid MUST be good for 60 calendar days after submission. In addition to providing pricing through the marketplace, BPA Holders must include certain non-pricing information as document(s) attached to their quote, so they are received no later than the closing date and time of this action. Pricing will not be accepted if it is included in the attachment(s). Attachment(s) can total no more than 20 MB, whether multiple files or one file, and may be zipped to decrease their size. A BPA Holder�s failure to comply with these terms may result in its quote being determined to be non-responsive. Note: For Orders that contain Drawings: In order to obtain copies of the Drawing(s) listed in the SOW, please contact Ronny Alzamora at ronny.alzamora.civ@mail.mil. Do not submit quotes directly Ronny Alzamora, all quotes must be submitted directly through the Unison Marketplace in order to be considered for award. All terms and conditions of the Base Blanket Purchase Order are applicable. The clauses in the Buy Terms of Unison Marketplace do not apply to this requirement. All BPA holders are required to provide pricing as stated through the marketplace of Marketplace. This requirement is a 100% small business set aside. The applicable NAICS code for this procurement is 332710 with the related size standard of 500 employees. 52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (OCT 2020) See attachment for full text 52.204-25 PROHIBITION ON CONTRACTING FOR CERTAIN TELECOMMUNICATIONS AND VIDEO SURVEILLANCE SERVICES OR EQUIPMENT (AUG 2020) See attachment for full text 52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES--REPRESENTATION (OCT 2020) See attachment for full text IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. Reporting During Contract Performance Equal Opportunity
Web Link: SAM.gov Permalink
(https://sam.gov/opp/09eb0c98151d43e1adb1af3c3ec909bf/view)
Place of Performance: Address: 5231 South Scott Plaza , JMDL, NJ 08640, USA; Zip Code: 08640; Country: USA
Record: SN06505398-F 20221030/221028230100 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

73 -- 73--Field Feeding Kitchen Equipment