SOLICITATION NOTICE
J -- Overhauling of Engine room Ventilation Fan on CGC Abbie Burgess
- Notice Date
- 9/2/2022 11:18:34 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
- ZIP Code
- 94501
- Solicitation Number
- 70Z085222P38939
- Response Due
- 9/12/2022 8:00:00 AM
- Archive Date
- 09/27/2022
- Point of Contact
- SK2 WILLIAM SWORD, Phone: 5104375436
- E-Mail Address
-
WILLIAM.A.SWORDJR@USCG.MIL
(WILLIAM.A.SWORDJR@USCG.MIL)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. Request for Quotations number is 70Z085222P38939 and is issued as a request for quotations (RFQ). This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This Request for Quotations incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-84 dated Nov 1, 2015. The NAICS Code is 336611. The Small Business Size Standard is 1250. This is a total small business set aside. All responsible sources may submit proposals that will be considered by the agency. The contract will be awarded on a firm-fixed-price basis using simplified acquisition procedures in accordance with FAR Part 13.5. **For purposes of evaluation and award, Past Performance is considered to be more important than Price. Offerors shall submit quotes as follows � Date: SEPTEMBER 12TH, 2022 Time: 0800 Pacific Standard Time (PST) Place: William.a.swordjr@uscg.mil REQUIRED DOCUMENTS: Each Offeror shall furnish the information required by the solicitation, which includes: Section 1: Price quote including cost breakdown. Section 2: Past Performance / References Proposal (This section should include the offerors completed representations and certifications.); and � Section 3: Any issued amendments to the solicitation. ANTICIPATED AWARD DATE:� The contract is expected to be awarded on or about 09/12/2022. QUESTIONS: The last day to ask questions will be SEPTEMBER 12th, 2022, 0800 Pacific Standard Time (PST).� Questions shall be submitted via e-mail to William.A.Swordjr@uscg.mil. ��After this date, unless amended, questions will not be accepted. For information regarding this solicitation, please contact WILLIAM SWORD, 510-437-5436. Please Note:� Amendments to this solicitation will be publicized in the same manner as the initial synopsis and solicitation. Questions and quotes shall be emailed to William.A.Swordjr@uscg.mil. �Contractors are responsible for verifying receipt of quotes. INTERESTED VENDORS PLEASE SEND OFFICIAL QUOTE, WITH A SAM.GOV REGISTERED DUNS NUMBER, AND EMAIL TO William.A.Swordjr@uscg.mil. DISCREP 22002- Engine Room Supply Fan OVHL - ABBIE BURGESS 1. SCOPE 1.1 Intent. This work item describes the requirements for the Contractor to remove and install Engine Room Vent Fan assembly, re-install after overhaul, clean, inspect and test. 1.2 Period of Performance. Preferred dates as listed: Primary: 14-16 Sep 2022 Secondary: 21-23 Sep 2022 (Subject to change only with Cutter and Vendor�s coordination with each other) 2. REFERENCES COAST GUARD PUBLICATIONS Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures 3. REQUIREMENTS Protective measures. The Contractor must furnish and install all protective measures in accordance with SFLC Std Spec 0000, (Vessel component, space, and equipment protection). Interferences. The Contractor must handle all interferences in accordance with SFLC Std Spec 0000, paragraph 3.3.5 (Interferences). Known interferences include, but are not limited to the following: � Piping � Bulkheads � Insulation � Foundations � Ventilation Ducting � Electrical Wiring Safety. The Contractor shall familiarize themselves with and comply with applicable requirements invoked in CG TP 3363 (particularly associated WARNINGS, CAUTIONS and NOTES). The Contractor shall un-install existing window in accordance with requirements found applicable. Installation. The Contractor shall remove/ovhl/blast/paint/inspect/test Vent Fan with their own provide tools/equipment: 47 CHANDLER ST, NAVSTA NETC, PIER 2, Newport, RI 02841-1716. Contractor shall: � Remove and install Vent Fan assembly and re-install after overhaul � Clean, Inspect and test windings and parts � Measure machine fits for tolerance � Check Shaft for straightness � Remove Motor from Vent housing � Balance rotor � Varnish windings � Balance Fan � Sandblast and paint Vent housing Operational test, post repairs. After completion of work and in the presence of the Coast Guard Inspector (EPO/APO), the Contractor must thoroughly test, make any adjustments, and demonstrate the equipment to be in satisfactory operating condition. 3. EQUIPMENT SPECS (Engine Room Vent Fan) PART Name: FAN, VANEAXIAL Part # MA150AF NSN 4140-01-365-8215 ManU Fan Drawing 8W-44284 Rev G. ManU Motor Drawing 706527-624 ID E2064 Rating 7.5 RPM 2 SPEED Rated V. 440 # of Phases 3 Frequency (Hz) 60 Enclosure tT.E.F.C Eyebolt No
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/01d4c39a17524cbc82bb67c7a349ac2d/view)
- Place of Performance
- Address: Rockland, ME 04841, USA
- Zip Code: 04841
- Country: USA
- Zip Code: 04841
- Record
- SN06451781-F 20220904/220902230124 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |