SOURCES SOUGHT
J -- 45 TON WASHINGTON IRON WORKS PORTAL CRANE ELECTRICAL CONTROL REPLACEMENT
- Notice Date
- 8/3/2022 12:28:02 PM
- Notice Type
- Sources Sought
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- FA4418 628 CONS PK JOINT BASE CHARLESTON SC 29404-5021 USA
- ZIP Code
- 29404-5021
- Solicitation Number
- REQA023823
- Response Due
- 8/18/2022 3:00:00 PM
- Point of Contact
- Matthew Michel, Terry Harrelson
- E-Mail Address
-
matthew.michel@us.af.mil, Terry.Harrelson.1@us.af.mil
(matthew.michel@us.af.mil, Terry.Harrelson.1@us.af.mil)
- Description
- THIS IS NOT A SOLICITATION ANNOUNCEMENT, THIS IS A SOURCES SOUGHT ANNOUNCEMENT CONDUCTED FOR MARKET RESEARCH PURPOSES. Joint Base Charleston, SC is seeking sources for a requirement to replace the existing DC crane electrical and control system on a 1969 Washington Iron Works Portal Crane located at the Joint Base Charleston, Goose Creek, SC. �The scope of work includes replacing the DC control system and components for the Luffing Hoist, Main Hoist, Auxiliary Hoist, Rotate, and Gantry Travel. Refurbish existing DC motors or replace as needed for the Luffing Hoist, Main Hoist, Auxiliary Hoist, Rotate and Gantry Travel.� Repair/replace operators cab flooring to support the installation of a new control chair to control all crane operations. Remove all old wiring and conduit and install new wiring and ridged watertight type conduit to support newly installed control systems and control chair. Replace all existing interior and exterior lights with environment appropriate LED light fixtures and replace the existing wiring transformer and associated components. Upgrade the cab with new AC/Heater Unit, power outlets, and wiring. Install a minimum of 2 cameras in the machine house and monitoring system in operators cab. All replacements and repairs are required to be performed in accordance with all applicable requirements and recommendations of the Original Equipment Manufacturer (OEM), American National Safety Institute (ANSI), American Society of Mechanical Engineers (ASME) and Occupational Safety and Health Association (OSHA). The contractor shall have the mechanical, electrical, and structural engineering service capability to support this project. A site visit will be conducted once the solicitation is released. Those wishing to identify their interest and capability to provide these services should respond via email to matthew.michel@us.af.mil no later than 18 August 2022. �Interested parties should provide the following information: (1) Company Name, Company Address, Point of Contact, phone number, email address, DUNS number, CAGE code. (2) Capabilities statement and/or information you wish to provide about your business. (3) Your small business size representations for NAICS 811310 � Commercial and Industrial Machinery and Equipment Repair and Maintenance. (i.e, Is your business small or large? �If small, is your business VOSB, SDVOSB, WOSB, EDWOSB, �HubZone, 8(a), etc?) The size standard for NAICS 811310 is $11M. (4) Do you believe this acquisition should be assigned a different NAICS than 811310? If so, which one? THIS REQUEST FOR INFORMATION OR ""SOURCES SOUGHT"" SHALL NOT BE CONSTRUED AS A SOLICITATION. INFORMATION IS TO BE PROVIDED ON A VOLUNTARY BASIS. NO ENTITLEMENT TO PAYMENT OF DIRECT OR INDIRECT COSTS OR CHARGES WILL ARISE AS A RESULT OF THE SUBMISSION OF INFORMATION.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/cbd95168c0044750a83e1dcd1d13a764/view)
- Place of Performance
- Address: Goose Creek, SC 29445, USA
- Zip Code: 29445
- Country: USA
- Zip Code: 29445
- Record
- SN06413463-F 20220805/220803230118 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |