Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
SAMDAILY.US - ISSUE OF AUGUST 03, 2022 SAM #7551
SOLICITATION NOTICE

12 -- Flip chip bonding of various ASICS and Sensors

Notice Date
8/1/2022 11:02:12 AM
 
Notice Type
Solicitation
 
NAICS
334419 — Other Electronic Component Manufacturing
 
Contracting Office
SLAC Natl Accel Lab -DOE Contractor Menlo Park CA 94025 USA
 
ZIP Code
94025
 
Solicitation Number
SLAC_331253
 
Response Due
8/16/2022 2:00:00 PM
 
Archive Date
08/31/2022
 
Point of Contact
Katherine Jill A. Coh, Phone: 6509262770
 
E-Mail Address
kcoh@slac.stanford.edu
(kcoh@slac.stanford.edu)
 
Small Business Set-Aside
8A 8(a) Set-Aside (FAR 19.8)
 
Description
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy.� As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy.� As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions. Hello� �����, SLAC National Accelerator Laboratory has a requirement for the following item(s) listed below. Required item(s) listed below: 1.) Flip Chip Bonding of Various ASICS and Sensors for Tender X-ray Imaging Statement of Work attached for Requisition # 331253 Quote is for product only; no on-site services permitted. Source selection will be based on Lowest Priced Technically Acceptable. See technical evaluation criteria below: 1.� Ability to meet technical requirements.� The Offeror�s data package will be evaluated to confirm that it demonstrates the Offeror�s ability to manufacture and demonstrate compliance for the production assembly of the flip-chip modules. Supports that meet the technical specifications set out in the Statement of Work. � � � � � � �1.1 The University will evaluate the Offeror�s ability to produce the quantity per the requisition to meet the physical specification requirements. 2. Testing and Inspection. The University will evaluate the Offeror�s plan showing the ability to perform x-ray microscopic inspections of the bonded modules to assure the bump connection yield stated in the SOW. 3.� Schedule and Delivery Date.� The University will evaluate the Offeror�s submitted ��� schedule on how it meets the University�s project schedule for final delivery, which includes a breakdown of work, manufacturing, procurement of long lead equipment, and activities such as inspection. 4. Manufacturing capabilities and capacity. The University will evaluate the Offeror�s plan that demonstrates the Offeror�s resources and project management support are adequate to deliver the system on ��������������� schedule, using a quality controlled manufacturing process.� Proposals must ���� demonstrate that the Offeror ��������������� possesses adequate procurement capabilities, fabrication ��������� facilities and testing facilities ��������������� to execute the subcontract. 5.� Past performance.� The University will evaluate the Offeror�s documentation of prior manufacturing and testing for at least 2 similar/comparable assemblies as close to the�������� specifications in the attached SOW as possible, and delivered in quantity and on a schedule closest to the quantity and schedule as specified in the attached SOW, Offerors with no relevant past or present performance history shall receive the rating �Unknown Confidence�. Please provide a price and lead time quotation by COB August 16, 2022.� Send quote to kcoh@SLAC.stanford.edu. Is there any room for� discount such as for Academic, ICPT, GSA, or Government Institutions? Buy American Act Certification (BAA) applies to quote more than $10,000.� Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return. All subcontractors are required to register in the System for Award Management (www.sam.gov). If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted. The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. December 2016) will be made a part of the resulting order. Payment Terms will be NET-30 Freight terms will be FOB Destination Prepaid and Add You are requested to mark and identify proprietary/confidential information provided in response to the solicitation. Contact me directly with any questions. Sincerely, Katherine Jill A. Coh Procurement Commodities Team Lead SLAC National Accelerator Laboratory 2575 Sand Hill Road Menlo Park, CA 94025 Phone: 650-926-2770 Email: kcoh@slac.stanford.edu
 
Web Link
SAM.gov Permalink
(https://sam.gov/opp/b3e6873362174afe9ef7b819e60808bf/view)
 
Place of Performance
Address: Menlo Park, CA 94025, USA
Zip Code: 94025
Country: USA
 
Record
SN06409174-F 20220803/220801230130 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.