SAMDaily.us | PRESOL | 59 | 59--Heterodyne Photon Doppler Velocimetry

SAMDAILY.US - ISSUE OF JULY 22, 2022 SAM #7539
SOLICITATION NOTICE

59 -- 59--Heterodyne Photon Doppler Velocimetry

Notice Date: 7/20/2022 11:16:01 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 334515 — Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
Contracting Office: W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
ZIP Code: 13602-5220
Solicitation Number: WPDEANCMENATHANIEL
Response Due: 7/29/2022 8:00:00 AM
Archive Date: 01/25/2023
Point of Contact: Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Email: MarketplaceSupport@unisonglobal.com;
E-Mail Address: marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is WPDEANCMENATHANIEL and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 334515 with a small business size standard of 750.00 employees. This requirement is a Small Business Set-Aside and only qualified sellers may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-07-29 11:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be West Point, NY 10996 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: Agilent MXR404A 4-8 Channel High Speed Oscilloscope � 4 GHz on all 4+ analog channels, ability to conduct a live FFT on all four plus channels, USB data retrieval, Ethernet remote connection, BNC Input and Output Trigger, Channel triggering, upgradability to 8Ghz, a minimum of 250 GB memory, 200Mpts/channel memory, 10bit resolution on each channel at 4GHz sampling, accurate measurements with ENOB up to 9.0, noise as low as 43 �V, less than 0.98 mVrms, accessories for functionality included: probes, power cords, BNC calibration, panel cover if applicable, keyboard and mouse, software. etc;, 1, EA; LI 002: NKtPhotonics ACOUSTIK Laser Card Rack � Required to run laser and amplifier cards. Integration of BASIK and BOOSTIK; Build-in power supply; controls up to 16 BASIK modules; controls up to 2 BOOSTIK modules; robust industrial design, fan-less design., 1, EA; LI 003: NKtPhotonics BASIK E15Target and Reference Lasers � 1550nm lasers with frequency adjustment using FC-APC type connections. Required for the creation of two beat frequencies for a frequency multiplexed signal. Laser emission. Laser emission CW � inherently single frequency; Beam quality M� 50 dB (typ. > 55 dB); Min thermal wavelength tuning range � 350 pm; Total thermal tuning range 1000 pm; Fast wavelength modulation rang 8 GHz; Fast wavelength modulation 23 dB; Monitor optical output FC/APC; Power supply requirements 12 VDC; Power consumption Typical 4 W, max 10 W; Electrical interface 30 pin DIN41612 male; Fast modulation drive voltage Differential 2�5 V w/ common-mode voltage at 2.5 V; Connectors � standard FC/APC pigtailed; Connectors � option Bulkhead/pigtailed FC/APC, Monitor output, 3, EA; LI 004: NKtPhotonics Boosktik Laser Amplifiers� 1550nm laser amplifier with FC-APC type connections a single system may require mounting external to a laser card box. Required to boost lasers for pressure shear measurements. CW � inherently single frequency; Seed laser linewidth 45 dB; PER> 20 dB; Output isolation > 30 dB; Power supply 12 VDC; Power consumption 20; Power Source1 Lithium Coin Cell (CR2477N) micro-USB; Battery Life3 years Typical (slow mode); Display Resolution dB0.1; Display Refresh Rate sec=50dB return loss and in rectangular housing. Suggested: OzOptics BB-500-11-1500-9/125-S-50-3A3A-3-1;, 12, EA; LI 012: Fiber Optic Circulators� 1550nm fiber optic circulator with FC-APC type connections. 1550 three stage Optical Circulators are non-reciprocal devices that redirect light at 1550 nm from port-to-port in only one direction while minimizing back reflection and back scattering in the reverse directions for any state of polarization. Type 3, 1550nm Wavelength, Grade 1; 5.5x62 size, SM-028, 900um loose tube, 1m length, FC/APC Connections; Suggested: Agiltron OCPI-305111333, 6, EA; LI 013: Fiber Optic Coupler/Splitters 1x2� 1550nm fiber optic splitter, 1x2 even power split attenuator with FC-APC type connections, Fiber Optic Fused Monolithic Coupler Single window, 1550nm wavelength, Premium grade, 54(L) Package, 50/50 Coupling Ratio, 900um Loose Tube fiber, FC/APC connections; Suggested: Agiltron FC-15119133;, 8, EA; LI 014: Fiber Optic Coupler/Splitters 1x4� 1550nm fiber optic splitter, 1x4 even power split attenuator with FC-APC type connections, Fiber Optic Fused Monolithic Coupler 1550nm wavelength, Premium grade, 54L Package, 1/25 Coupling ratio, 1x4 Port, 900um SMF Fiber type, Wide Band, FC APC Connectors, Suggested: Agiltron FCSM-112113113, 4, EA; LI 015: FC/APC mating sleeve � FC/APC Female-Female Mating fitting, Single Mode, Threading Style 2; Suggested: fiberinstrumentsales 8211APC;, 56, EA; LI 016: Simple 3m Patch Cables� Optical patch cables with connectors, 0.2dB Typical Loss, -65dB Back Reflection, bend insensitive, FIS Fiber Optic Cable Simplex 900?m SM SMF-28� Ultra Fiber FC/APC to FC/APC, -20 to +70 degrees Celsius Operating Temperature; Suggested: Fiber Optic Instrument Sales SKU N97A7AS3FISCU;, 20, EA; LI 017: 1m Heavy Patch Cables� Optical patch cables with FCAPC connectors, 0.2dB Typical Loss, -65dB Back Reflection, Made with Corning� SMF-28� Ultra Fiber (bend-insensitive), Fiber Optic Patch Cable, FCAPC to FC APC 1 meter, 3mm Simplex SM SMF-28� Ultra Fiber; Suggested: Fiber Optic Instrument Sales SKU S97A7AS1FISCU, 12, EA; LI 018: 3m Heavy Patch Cables� Optical patch cables with FCAPC connectors, 0.2dB Typical Loss, -65dB Back Reflection, Made with Corning� SMF-28� Ultra Fiber (bend-insensitive), Fiber Optic Patch Cable, FCAPC to FC APC 3 meter, 3mm Simplex SM SMF-28� Ultra Fiber; Suggested: Fiber Optic Instrument Sales SKU S97A7AS3FISCU;, 8, EA; LI 019: 10m Heavy Patch Cables� Optical patch cables with FCAPC connectors, 0.2dB Typical Loss, -65dB Back Reflection, Made with Corning� SMF-28� Ultra Fiber (bend-insensitive), Fiber Optic Patch Cable, FCAPC to FC APC 10 meter, 3mm Simplex SM SMF-28� Ultra Fiber Suggested: Fiber Optic Instrument Sales SKU S97A7AS10FISCU, 8, EA; LI 020: 20m Heavy Patch Cables� Optical patch cables with FCAPC connectors, 0.2dB Typical Loss, -65dB Back Reflection, Made with Corning� SMF-28� Ultra Fiber (bend-insensitive), Fiber Optic Patch Cable, FCAPC to FC APC 20 meter, 3mm Simplex SM SMF-28� Ultra Fiber; Suggested: Fiber Optic Instrument Sales SKU S97A7AS20FISC, 8, EA; LI 021: 3km-6km delay legs � Long spooled fiber with 900�m sleeved fiber, 0.2dB Typical Loss, -65dB Back Reflection, SMF28 Ultra fiber (bend-insensitive), FC/APC to FC/APC connectors; Suggested: Fiber Optic Instrument Sales SKU Custom, 4, EA; LI 022: 19� Rack for mounting on a desk� ~1-1.5m high, black, compatible with PDV system rack mounting and drawer., 1, EA; LI 023: 19� 4U Rack drawer�Compatible with 19� rack and PDV rack mounted system, 1, EA; LI 024: Rack Box� 19� Rack Box to house PDV optical lines 4-8U should be sufficient, RBX32 - Rack Box Chassis with Slide Out Rails, 1/4""-20-Tapped Breadboard, Large Working Surface [15.5"" x 16"" (39.4 cm x 40.6 cm)] is accessible when Rack Box is Extended, Chassis Sold without Subpanels to Enable Configuration of Application-Specific Systems, Roller Bearing Slides; Rated for 175 lbs., Easy Access to Optical Layout, Fully Protected when Closed; Suggested: Thorlabs RBX32, 1, EA; LI 025: SMA subPanel� 19� Rack Box SMA Panel, Subpanels for Rack Box Chassis with SMA to SMA Mating Sleeves; Suggested: Thorlabs Part Number: RBX-SMA;, 2, EA; LI 026: FC subpanel� 19� Rack Box FC/APC Panel, Optical Fiber Subpanels for Rack Box Chassis with FCAPC to FCAPC Mating Sleeves; Suggested: Thorlabs Part Number: RBX-FC4, 3, EA; LI 027: AC subpanel� 19� Rack Box AC Panel, This power module attaches to a wide slot on the back of the Rack Box Systems, 125/250 VAC Compatible, Current Rating: 0.1 to 15 A, Four 8-32 Button Head Screws Included, C14 Three-Pin Inlet Connector Compliant with IEC/EN 60320-1TOT; Suggested: Thorlabs Part Number: RBX-AC, 1, EA; LI 028: BNC subpanel� 19� Rack Box BNC panel, Sub panel with four male-male BNC connectors; Suggested: Thorlabs Part Number: RBX-BNC, 2, EA; LI 029: Large Blank panel� 19� Rack Box Large Blank panel, to enclose rack box; Suggested: Thor Labs Part Number: RBX-BLK1B, 4, EA; LI 030: Fiber Saddles� A package of 10 fiber saddles for fiber routing; Suggested: Thorlabs Part Number: PFS02, 2, EA; LI 031: 3mm Saddles� A package of 10 fiber saddles for 3mm fiber routing; Suggested: Thorlabs Part Number: PFS01, 2, EA; LI 032: Blank- 19� Rack Box small blank panel, blank sub panel to enclose rack box; TOT EST Cost: $520.00; Suggested: Thorlabs Part Number: RBX-BLK1F, 16, EA; LI 033: Longitudinal Measurement Probes� Optical collimated fibers with FCAPC connectors, Single Fiber, A grade; 1550nm, 6 mm working distance, 2m of 900um jacket, 2.4x10 mm ss tube, SMF-28, FC/APC Connector; Suggested: AC-Photonics 1CL15A006LCC01, 200, EA; LI 034: Transverse Measurement Probes� Larger Optical collimated fibers with FCAPC connectors, Single Fiber, A grade; 1550nm, 70 mm working distance, 2m of 900um jacket, 2.78x10 mm glass tube, SMF-28, FC/APC Connector; Suggested: AC-Photonics 1CL15A070LCD01, 200, EA; LI 035: Optical Send/Detect Power Meter� 1550 Optical Return Loss Meter Ability, sends optical signals down a FC/APC fiber and returns the power received from the same line, ultrasensitive power meter combined with stabilized light sources enable up to a 70 dB measurement range. The angled single-mode test port (APC) guarantees highly accurate return loss measurements without requiring external termination for up to 50 dB return loss measurements; Suggested: JDSU or Viavi 2311/21 SmartClass Fiber ORL-85 Optical Return Loss Meter, 1310/1550 nm, APC, 1, EA; LI 036: IS/IR Detector Card� 1550nm detection card making 1550nm visible to the protected eye. Suggested: Thor Labs VRC2;, 2, EA; LI 037: Optical Probe Inspector Microscope� Ability to inspect fiber optic FC APC Probes, high-intensity illumination system and 200X magnification; Suggested: Thor Labs FS201-FC, 1, EA; LI 038: Probe Cleaner� Ability to clean fiber optic FC APC Probes. Lint-Free Cleaning Cloth to support and remove dirt debris and oil from connector faces; Suggested: Thor Labs FCC-7020, 2, EA; LI 039: Connector Cleaner� Ability to clean fiber optic FC APC Probe connectors and bulkheads; Suggested: Thor Labs FBC125;, 2, EA; LI 040: Compression Seal Optical fiber Vacuum Fitting � 1� 4 fiber optical patch cable vacuum pass through, allows 4 FCAPC patch cables in a single fitting to pass through a vacuum bulk head; TOT EST Cost: $860.00; Suggested: Conax BSWS6-118-A4-V (.118"" = 3mm), 2, EA; LI 041: Compression Seal blank Vacuum Fitting � 1� Blank rubber cable vacuum feed through for customizable cable passthrough; Suggested: Conax BSWS6-BLANK-A-V;, 2, EA; LI 042: Bulkhead Mount Hermetically Sealed BNC Male to BNC Male Adapter� BNC Vacuum chamber feedthrough with supporting up to 8Ghz signals; Suggested: Pasternak PE9093, 8, EA; LI 043: AE-40 Laser Sentry Entryway Control System� Front Panel mounted system controls and status indicators and E-Stop button, Control all lab lasers and shutter via a single key, Local or remote system engage (start up), Audible/Visible warning during engage timer and exit period, control of magnetic door latches, Automatic control of Tri-Lume and Bi-Lume lighted laser warning signs, Local or remote �exit request� control, Adjustable exit delay period, Entry, exit and emission delays, Front panel mounted E-Stop button, Auxiliary input for interlocking through other systems such as facility fire alarm, 4 isolated laser interlock circuits, 3 isolated Auxiliary Interlock circuits, �Exit Delay Active� contact closure, Voltage output indicates system status for easy monitoring by other systems, System status indicators, Suggested: Rockwell Laser Industries B-LSECS-AE40, 1, EA; LI 044: AE-40 Bi-Lume LED Warning Sign� Indicates whether the laser is operational and further if the laser is Off or On, Solid State LED lighting, Low voltage DC operation, no shock hazard, Cool to the touch, no incandescent bulb heat or fire hazard, Approximate Dimensions: 10 1/4"" W x 14 1/4"" H x 2"" D, Suggested: Rockwell Laser Industries LSL-LED-02, 1, EA; LI 045: Magnetic Reed Switch� Magnetic reed type door switches are used to detect the position of a Laser Sentry controlled door. If the door is in the closed position, normal laser operation is allowed. Suggested: Rockwell Laser Industries B-LSECS-MRS-2, 2, EA; LI 046: 1550nm Laser Safety Glasses� 1550nm laser safety glasses, must let a wide band of optical light through (optically clear). Two pairs must be able to fit over glasses., 6, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerers that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, for the extended description here is the website: https://www.acquisition.gov/ The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf 5152.233-4000 AMC-LEVEL PROTEST PROGRAM (Feb 2014) (LOCAL CLAUSE) Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer (Phone: (315)772-7272 or Email: usarmy.drum.acc-micc.mbx.micc@mail.mil). However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: https://www.amc.army.mil/Connect/Legal-Resources/. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factor shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is a pass fail requirement. Evaluation is based on a lowest price technically acceptable. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@army.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED***** Representation and Representation Disclosures The form(s) included in the buy must be returned with your quote. Failure to return the form(s) with your quote will result in your quote not being considered for award. Reporting During Contract Performance Equal Opportunity
Web Link: SAM.gov Permalink
(https://sam.gov/opp/ca5f61a89f804c16a7a11f494785e1a0/view)
Place of Performance: Address: 752 Thayer Road Mahan Hall, West Point, NY 10996, USA; Zip Code: 10996; Country: USA
Record: SN06395957-F 20220722/220720230117 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

59 -- 59--Heterodyne Photon Doppler Velocimetry