SOURCES SOUGHT
12 -- Fire Detection Set
- Notice Date
- 7/19/2022 7:03:44 AM
- Notice Type
- Sources Sought
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7M922R0008
- Response Due
- 7/25/2022 12:00:00 PM
- Point of Contact
- Ken Pliska614-692-5373, Herman Poe614-692-2865
- E-Mail Address
-
Ken.Pliska@dla.mil, Herman.Poe@dla.mil
(Ken.Pliska@dla.mil, Herman.Poe@dla.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- Review the below NSN and provide us with any sources that are able to manufacture the item. Please provide the POCs for these manufacturers, if available. All of this information can be submitted to Ken Pliska at ken.pliska@dla.mil, Phone (614) 692-5373on the attached market survey form. Thank you for your time and cooperation. NSN��� 1290-00-299-6893 Item���� FIRE DIRECTION SET RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/Logistics-Operations/Enhanced-Validation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. RD002, COVERED DEFENSE INFORMATION APPLIES RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES FULL AND OPEN COMPETITION APPLY RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION. IAW BASIC DRAWING NR 19200 8636240 REVISION NR L DTD 06/27/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8636240 REVISION NR G DTD 01/01/1939 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 10559107 REVISION NR DTD 01/12/1976 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 10548693 REVISION NR A DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE QAP 19200 10548693 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 10511580 REVISION NR L DTD 02/28/1991 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 11785433 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 11785439 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12579607 REVISION NR C DTD 08/04/2009 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 11785402 REVISION NR DTD 11/24/1982 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 96906 MS70109 REVISION NR A DTD 05/29/1969 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 11785419 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 11785435 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 11785436 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 11785437 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 11785438 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9331276 REVISION NR DTD 10/01/1979 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9331276 REVISION NR DTD 10/01/1979 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9331277 REVISION NR A DTD 11/10/1984 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 9331277 REVISION NR DTD 10/01/1979 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 10548693-2 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 10548693-3 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 10548693-4 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 10548693-5 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 12961315 REVISION NR DTD 06/27/1996 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8636237 REVISION NR D DTD 01/30/1991 PART PIECE NUMBER: 8636237-2 IAW REFERENCE DRAWING NR 19200 8636237-2 REVISION NR E DTD 01/24/1977 PART PIECE NUMBER: IAW REFERENCE SPEC NR MS16218B NOT 2 REVISION NR B DTD 06/30/1998 PART PIECE NUMBER: IAW REFERENCE SPEC NR MS27183L REVISION NR L DTD 10/22/2021 PART PIECE NUMBER: IAW REFERENCE SPEC NR MS35425E NOT 2 REVISION NR E DTD 10/09/2013 PART PIECE NUMBER: IAW REFERENCE SPEC NR MS35495D NOT 4 REVISION NR D DTD 09/17/2018 PART PIECE NUMBER: IAW REFERENCE SPEC NR MS35646B NOT 2 REVISION NR B DTD 09/17/2018 PART PIECE NUMBER: IAW REFERENCE SPEC NR MS35751E NOT 1 REVISION NR E DTD 06/22/1999 PART PIECE NUMBER: IAW REFERENCE SPEC NR MS39124D NOT 1 REVISION NR D DTD 04/08/1992 PART PIECE NUMBER: IAW REFERENCE SPEC NR MS51967D NOT 5 REVISION NR DTD 04/15/2022 PART PIECE NUMBER: IAW REFERENCE NON GOVT STD NASM35751 REVISION NR 2 DTD 03/31/2015 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8636237 REVISION NR E DTD 03/23/2006 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 10548693-1 REVISION NR DTD 08/03/1983 PART PIECE NUMBER: IAW REFERENCE DRAWING NR 19200 8636240 REVISION NR DTD 03/19/2018 PART PIECE NUMBER:
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/eb8d28969cea4f54ad9a83f3917b3eca/view)
- Place of Performance
- Address: Columbus, OH 43218, USA
- Zip Code: 43218
- Country: USA
- Zip Code: 43218
- Record
- SN06394597-F 20220721/220719230100 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |