SOLICITATION NOTICE
38 -- EQUIPMENT: HOLDER MODEL C70 - Ready (Ralf)
- Notice Date
- 7/11/2022 12:16:33 PM
- Notice Type
- Presolicitation
- NAICS
- 423810
— Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers
- Contracting Office
- 241-NETWORK CONTRACT OFFICE 01 (36C241) TOGUS ME 04330 USA
- ZIP Code
- 04330
- Solicitation Number
- 36C24122Q0759
- Response Due
- 7/25/2022 1:00:00 PM
- Archive Date
- 09/23/2022
- Point of Contact
- Ralf Pietzsch, Contractor, Phone: 931-626-3615
- E-Mail Address
-
ralf.pietzsch@va.gov
(ralf.pietzsch@va.gov)
- Awardee
- null
- Description
- Scope of Work Contractor to provide and deliver: Holder C70 Specifications: HOLDER C70SC MULTIFUNCTIONAL CARRIER HOLDER CABIN Perfect view of attachments and maximum working comfort Comfort cabin with air conditioning and 360° circumferential visibility Sliding windows on both sides Heated windshield and mirrors Very spacious even for tall and big drivers Air-suspended driver's seat incl. seat-heating, height-adjustable and longitudinally adjustable, with longitudinal-horizontal suspension 2-person cabin with full-fledged passenger seat OPERATING CONSOLE Intuitive operation enables minimum fatigue and easy operation Adjustable armrest mounted to the seat 1-hand operation The most important functions on the joystick including forward/reverse, speed and constant drive control and operation of the control valves Drive program control for four or five driving and working steps Including limit load control adjusts the driving speed to performance on the front attachment automatically SERVICE ACCESS Daily service work possible without disassembling the attachments Over-engine platform can be raised hydraulically to provide easy access to the engine compartment without the necessity to remove the attachments Hydraulically tiltable cab Swing-out tanks on both sides (for fuel and hydraulic oil) Battery is accessible from the outside for e.g., jump starting during winter FRONT AND REAR ATTACHMENT Front power lift is movable 3-dimensionally and double-acting, with vibration damping, arrester hooks adjustable from CAT IN to CAT I Double-acting rear power lift with vibration damping, arrester hooks are adjustable from CAT IN to CAT I Mechanical PTO shaft front Hydraulic PTO shaft rear HOLDER POWERDRIVE Four 24 in³ / 400 cm³ strong wheel motors, the PowerDrive provides 40 % more towing power and 50 % more climbing capability than regular all-wheel drives. Transport mode the torque of the wheel motors is reduced by half and the rear axle is deactivated to reach maximum driving speed at a much lower engine speed Switching between all-wheel and two-wheel drive as well as between full and half wheel motor use can take place automatically at all times, the driver can focus fully on the application or the road. Including four-wheel brake system for more safety. ATTACHMENT AREAS 3 attachment areas: standard front lift and optional rear lift, as well as the 3rd area over the engine Easy attachment mounting: one-person and no tools required STEPLESS DRIVING Up to 25mph / 40 km/h Working: speed control via rotary potentiometer on the joystick Alternatively, speed control via foot throttle at constant PTO shaft speed = SDS traction drive ELECTRO-HYDRAULIC ATTACHMENT RELIEF Weight of the attachment can be transferred to the entire vehicle steplessly when turning around on a hillside WHEEL-LOAD COMPENSATION Ensures that all four wheels are in permanent contact with the ground, even in case of steep or uneven terrain and when driving over obstacles QUICK CHANGE DEVICE Standardized interfaces implement can be changed quickly and easily Front attachments are hung on two catching hooks on the front lift (CAT IN, CAT I), the fixing takes place with bolts at the top link Rear constructions as flatbeds, containers or spreaders are simply pushed on the attachment frame and fixed with two bolts Hydraulic hoses have to be attached to the drip-free quick-release couplings Additional Features 4-wheel brake Inner mudguard against dirt ingress Electronic hand and foot control Digital combi display to show different vehicle functions Similar models may be shown ENGINE Engine: Kubota 4-cylinder 4-stroke turbo diesel Tier 4 final Displacement Displacement:160 in³ / 2615 cm³ Power Power: 48 kW (65 HP) Torque Torque: 165 lbf ft / 225.0 Nm Cooling Cooling: Water cooling Fuel tank capacity Fuel Tank Capacity: 17 gal / 65 l DRIVE Drive Drive: Hydrostatic traction drive, controlled digital-electrically, stepless road speed control, suspended front and rear axle; PowerDrive via four wheels of the same size Differential lock Differential Lock: Mechanical at the front and rear, simultaneously switchable electrohydraulically, acts on both axles at 100 % Maximum speed Maximum Speed: 25 mph / 40 km/h PTO shafts PTO Shaft: Includes optional: power-switchable, independent PTO shaft, can be switched separately at the front and rear Front: mechanically powered, 1000 rpm or optionally 540 rpm Rear: hydraulically powered, 540 rpm Size: 1 3/8 inches Brakes Brakes: Hydraulically actuated four-wheel brake, electrically actuated stop brake on the front axle HYDRAULICS Hydraulics Hydraulics: Hydraulic pump 9 US gpm / 35 l/min optionally extendable with additional device variable displacement pump 19 US gpm / 70 l/min Hydraulic oil quantity Hydraulic Oil Qty: 9.7 gal / 37 l Lifting force Lifting Force: Front 2425 lb. / 1100 kg Rear 2425 lb. / 1100 kg Three-point lift Three Point Lift: Standard three-point, arrester hook steplessly adjustable from CAT IN to CAT I Additional control valves Additional Valve Control: High expandability, adapted for the purpose WEIGHT Empty Weight: C 70 SC: 4250 - 5390 lb. / 1928 - 2445 kg C 70 TC: 4605 - 5738 lb. / 2089 - 2603 kg Permissible total weight Permissible Total Weight: 7715 - 8820 lb. / 3500 - 4000 kg Permissible axle weight Permissible Axle Weight: Front 5070 lb. / 2300 kg Rear 5070 lb. / 2300 kg Tow bar load on the trailer coupling Tow Bar Load on the Trailer Coupling: max. 1320 lb. / 600 kg Towing capacity Tow Capacity: Unbraked 3310 lb. / 1500 kg Overrun braked 7715 lb. / 3500 kg Maximum payload Maximum Pay Load: C 70 SC: 4120 lb. / 1872 kg (40 km/h) C 70 TC: 3770 lb. / 1711 kg (40 km/h) DIMENSIONS Dimensions eel base Wheelbase: C 70 SC: 72 in / 1820 mm C 70 TC: 74 in / 1870 mm Total length Total Length: C 70 SC: 115 - 148 in / 2928 - 3770 mm C 70 TC: 130 - 165 in / 3301 - 4190 mm Total height Total Height: C 70 SC: 81 - 89 in / 2050 - 2260 mm C 70 TC: 87 - 89 in / 2220 - 2272 mm Total outer width Total Outer Width: C 70 SC: 46 - 60 in / 1170 - 1530 mm C 70 TC: 54 - 60 in / 1360 - 1530 mm Turning circle inside Turning Circle: C 70 SC: From 59 in / 1490 mm C 70 TC: From 64 in / 1620 mm With the follow options and accessories: 50 Box Blower 1/3 CY Dump Body 50 3 Point Angle Plow 1/3 CY Sander 2-year warranty Filters required for maintenance for two years.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/6142b3d343c24024b397f038efd72294/view)
- Place of Performance
- Address: VA Bedford Healthcare System 200 Springs Road Bedford MA 01730, USA
- Zip Code: 01730
- Country: USA
- Zip Code: 01730
- Record
- SN06384482-F 20220713/220711230108 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |