SOLICITATION NOTICE
H -- Water Lubricant (WL) vertical turbine pumps
- Notice Date
- 5/11/2022 2:09:54 PM
- Notice Type
- Solicitation
- NAICS
- 333914
— Measuring, Dispensing, and Other Pumping Equipment Manufacturing
- Contracting Office
- US ARMY ENGINEER DISTRICT SEATTLE SEATTLE WA 98134-2329 USA
- ZIP Code
- 98134-2329
- Solicitation Number
- W912DW22Q0018
- Response Due
- 5/25/2022 2:00:00 PM
- Archive Date
- 06/09/2022
- Point of Contact
- Charles D. Idle, Phone: 2063163998
- E-Mail Address
-
charles.d.idle@usace.army.mil
(charles.d.idle@usace.army.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- GENERAL INFORMATION: The U.S. Army Corps of Engineers requires two (2) Water Lubricant (WL) vertical turbine pumps to be delivered to Albeni Falls Dam in Oldtown, Idaho. SPECIFICATIONS: Contract is for purchase of two (2) WL vertical turbine pump assemblies. The new vertical turbine pumps will replace existing unwatering pumps shown in appendix A. The pump and motor assemblies shall meet or exceed this requirement as specified and shall have the following minimum salient characteristics: Performance Characteristics: 3500 GPM flow rate at 60 Ft head WL application Motors: 75 HP 1800 RPM nominal NEMA 365TP Frame Designation Vertical hollow shaft with non-reverse ratchet 3PH, 460 VAC nominal WP1 Enclosure NEMA Premium Efficiency Rating Pumps: 79� - 4-1/2� total pump length Bottom of base plate flange to center line of pump discharge shall be 11� Center line of pump shaft to discharge flange face shall be approximately 13.75� 12� Flanged discharge connection Steel Fabricated F Style discharge head 16-1/2� Head Bolt Diameter 416 Stainless Steel Head Shaft 1.25� x 37.25� nominal dimensions Self-lubricating packing box bearing such as Glide 400 polymer Polymer lantern ring and stainless-steel spilt packing follower High-tensile strength abrasion-resistant packing such as John Crane 1345 12� x 0.375� threaded steel pump column 416 stainless steel line shaft, 1.25� � 12 TPI Shaft guard assembly 316 Stainless steel bearing spiders Self-lubricating column � shaft bearings such as Glide 400 polymer Single stage pump bowl Self-lubricating bowl bearings such as Glide 400 polymer 416 Stainless steel bowl shaft at 2.1875� nominal Stainless steel impeller 18-8 or 316 stainless steel fasteners 304 or 316 stainless steel bolts on basket strainer Foundation Plate, two (2) required 32� x 32� x 7/8� thick steel No holes for steel to concrete connection Base hole diameter, bolt diameter and tapped bolt holes in foundation plate shall match pump base Drill tapped bolt holes to time pump discharge flange parallel with 1 edge of foundation plate Dresser Couplings, two (2) required Dresser 12"" Style 38 coupling for cast iron/steel pipe or equal. SUBMITTALS: Pump and motor performance curve Two (2) Pump and motor dimensional prints Parts list Product data Four (4) Hard copies and one (1) digital copy of O&M manuals ACCEPTANCE OF MATERIALS: Materials will be inspected at the delivery point prior to acceptance. Contractor shall be responsible for maintaining the product�s condition as specified until the point of acceptance. New equipment only; no remanufactured or �gray market� items. DELIVERY SCHEDULE: The successful bidder shall be required to deliver the two (2) WL vertical turbine pump assemblies to Albeni Falls Dam on or before 1 September 2022.� Contractor is responsible for downloading from truck. All deliveries must take place during AFD business hours of Monday through Thursday 7:00 am � 4:00 pm, excluding Federal holidays. DELIVERY LOCATION: Item shall be delivered FOB DESTINATION to the following address: US Army Corps of Engineers ATTN: Ben Puyleart Albeni Falls Dam 2376 E. Hwy 2 Oldtown, ID 83822 APPENDIX A Existing Dewatering Pumps: The two dewatering pump motors are vertically mounted Fairbanks-Morse AC induction underdrive motors type QZO.� These motors are rated at 75 horse power continuous.� 3 phase. 220 / 440 volt. 178A / 89A.� Full load 1755 RPM.� 24 hour, 50 degree C rise. Frame 2045PV.� The two dewatering pumps are Fairbanks-Morse Figure 6972 Deep well pumps with a rated capacity of 3,500 GPM at 60 feet of head and a maximum pump speed of 1,760 RPM.� The pumps have an efficiency rating (min.) of 75% at rated operating point.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/c3045bddea714998ad2bcb8dd8fba8ac/view)
- Place of Performance
- Address: Oldtown, ID 83822, USA
- Zip Code: 83822
- Country: USA
- Zip Code: 83822
- Record
- SN06323809-F 20220513/220511230059 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |