SOLICITATION NOTICE
61 -- Solicitation N6449822R4033 - Brushless Diesel Generator Sets for LCC 19 FY25 Availability
- Notice Date
- 4/27/2022 11:36:16 AM
- Notice Type
- Solicitation
- NAICS
- 335312
— Motor and Generator Manufacturing
- Contracting Office
- NSWC PHILADELPHIA DIV PHILADELPHIA PA 19112-1403 USA
- ZIP Code
- 19112-1403
- Solicitation Number
- 22-SMM-041
- Response Due
- 5/27/2022 2:00:00 PM
- Archive Date
- 06/11/2022
- Point of Contact
- Sean McColgan, Phone: 215-897-3071, William O'Tormey, Phone: 215-897-2620
- E-Mail Address
-
sean.m.mccolgan.civ@us.navy.mil, william.j.otormey.civ@us.navy.mil
(sean.m.mccolgan.civ@us.navy.mil, william.j.otormey.civ@us.navy.mil)
- Description
- The legacy diesel generator sets currently installed on the LCC 19 ship are undersized, high�maintenance, failure prone and do not meet the 7Th Fleet requirements. NSWCPD Code 442 has�been tasked with replacing them with a shock qualified brushless replacement that will give the�ship a low maintenance and reliable electric plant to support the remainder of the service life for�the LCC which is currently slated for 2039. The Contractor shall provide a quantity of up to three (3) Ship Service Diesel Generators to serve�as replacements of existing generators. Each Diesel Generator shall comply with the ABS NVR�as pertaining to MIL-G-21296 and the requirements of this specification. Where there may be a�conflict, this specification shall take precedence. The generator sets shall be shock qualified to the requirements of MIL-S-901D either through previous qualification testing, extension�qualification, requests, partial testing, or full testing. Each new diesel generator shall be able to�provide at least 2000 kW (electrical) at 450 VAC, 60 Hz, 0.8 power factor, when operating�continuously as defined in Section 3.1.2 of the Statement of Work. If a generator set is not previously qualified or does not have shock testing completely waived by�the Technical Code, the First Article Test (FAT) will be established as CLIN 0001, and the�production units will be established as options under CLINs 0002-0004. Any generator set used�as the FAT unit will be turned over to the government and will not be considered a production�unit. For specific requirements, please see the Statement of Work in Section C of the attached RFQ, N6449822R4033. Amendment 1 is being issued to answer Contractor questions. Amendment 2 is being issued to answer a Contractor question and extend the solicitation. Amendment 3 is being issued to answer a Contractor question and extend the solicitation.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/bc7df86b27904aa396fe6e71fa70d90a/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN06310094-F 20220429/220427230102 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |