SAMDaily.us | PRESOL | 40 | 145,000 lbf M.B.S. Mooring Line

SAMDAILY.US - ISSUE OF MARCH 16, 2022 SAM #7411
SOLICITATION NOTICE

40 -- 145,000 lbf M.B.S. Mooring Line

Notice Date: 3/14/2022 10:54:31 AM
Notice Type: Combined Synopsis/Solicitation
NAICS: 314994 — Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills
Contracting Office: NUWC DIV NEWPORT NEWPORT RI 02841-1703 USA
ZIP Code: 02841-1703
Solicitation Number: N660422Q0234
Response Due: 3/22/2022 11:00:00 AM
Archive Date: 04/06/2022
Point of Contact: Kristin Amarant, Phone: 401-832-2606
E-Mail Address: kristin.d.amarant.civ@us.navy.mil
(kristin.d.amarant.civ@us.navy.mil)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: AMENDMENT 0001:� Purpose of this amendment is to answer questions as a result of this solicitation- N66604-22-Q-0234 Question #1: Do you need eyes spliced in to the rope, one end or each end? And can you take three pieces @ 1200' each or do you have to have one piece @3600'? Answer #1 We do not need eyes spliced into either end. Minimum continuous length remains 1200ft.� We can accept three @ 1200ft or one @ 3600ft. Question #2: Can you specify what material you want (which type of fibers)? Answer #2 It will need to be a synthetic material to meet the diameter limit and still achieve working load.� Question #3: Are you looking for wire rope or synthetic rope? There are many different types of each so we would need specifics as well.� Answer #3 It will need to be a synthetic material to meet the diameter limit and still achieve working load.� Question #4 Can you please provide more information like rope construction and�diameter along with core fiber. Answer #4 It will need to be a synthetic material to meet the diameter limit and still achieve working load.� Question #5: The original inquiry was for 1-1/4"" x 1200' amsteelblue. The new request in sam is for 1-1/2"" just want to make sure this is correct? Answer #5 The maximum diameter is 1.5"". Question #6 Normally, mooring lines have eyes spliced in them. This request makes no mention of them.� Do they just want straight reels of rope? Or do they want eyes spliced in the ends?� If so, what size eyes?� Each end or one end?� Any chafe sleeve? Answer #6 We do not need eyes spliced into either end. Naval Undersea Warfare Center Division Newport N66604-22-Q-0234 This is a combined synopsis and solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This synopsis/solicitation will be open for less than 30 days, in accordance with FAR 5.203(b). �Request for Quote (RFQ) number is N66604-22-Q-0234 This procurement is being solicited as a total Small Business set-aside under NAICS Code �314994: �Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills NUWCDIVNPT intends to award a Firm Fixed Price (FFP) purchase order for of 145,000 lbf Minimum breaking strength (M.B.S.) Mooring line, 3600 feet, to support long-term test events at the Seneca Lake Sonar Test Facility in Dresden, NY as follows: CLIN 0001 ��145,000 lbf M.B.S. Mooring Line The Minimum Requirements are as follows: Minimum Breaking Strength: �� 145,000 lbs. Maximum Diameter: �� 1.5 inches Minimum Continuous Length:�� 1200 feet Total Length Required: �� 3600 feet Specific Gravity:�� < .99 Water Absorption: �� < 2% Required Delivery is four (4) weeks after award.� The Offeror shall include shipping charges, if applicable, and specify delivery lead times in its quote. Delivery location is: SENECA LAKE SONAR TEST FACILITY 50 MAIN STREET DRESDEN, NY 14441 Incorporated provisions and clauses are those in effect through the current Federal Acquisition Circular. The following provisions and clauses apply to this solicitation: FAR 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment� FAR 52.204-25, �Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment� FAR 52.209-10, �Prohibition on Contracting with Inverted Domestic Corporations.� FAR 52.209-11, �Representation by Corporations Regarding Delinquent Tax Liability or Felony under any Federal Law.� FAR 52.212-1, �Instructions to Offerors � Commercial Items.� FAR 52.212-2,�Evaluation � Commercial Items.� �FAR 2.212-4, �Contract Terms and Conditions � Commercial Items."" FAR 52.212-5, �Contract Terms and Conditions Required to Implement Statutes or Executive Orders � Commercial Items.� DFARS 252.204-7008, �Compliance with Safeguarding Covered Defense Information Controls.� DFARS 252.204-7009, �Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information.� DFARS 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting; DFARS 252.204-7015, �Notice of Authorized Disclosure of Information for Litigation Support.� DFARS 252.204-7019 �Notice of NIST SP 800-171 DoD Assessment Requirements� DFARS 252.204-7020 NIST SP 800-171 DOD ASSESSMENT REQUIREMENTS DFARS, 252.213-7000, �Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations.� DFARS 252.215-7013, �Supplies and Services Provided by Nontraditional Defense Contractors.� DFARS 252.225-7031, �Secondary Arab Boycott of Israel.� In accordance with DFARS Clause 252.211-7003, the contractor shall provide a unique item identifier (UID) for all delivered items for which the Government�s unit acquisition cost is $5,000.00 or more. If UID applies, payment will be via Wide Area Workflow (WAWF). If UID does not apply, and if there are no surcharges, the Government�s preferred payment method is via credit card. Additionally, offerors shall review, complete and submit Attachment 1 � �52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment� with their offers. Full text of incorporated FAR/DFARS clauses and provisions are available at www.acquisition.gov/far. This solicitation requires registration within the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. This requirement will be awarded to the offeror with the lowest price technically acceptable (LPTA) quote. In order to be determined technically acceptable the offeror shall: Quote the items specified, in the required quantities, in accordance with Minimum Specifications. Additionally, the Government will consider past performance information in accordance with DFARS Provision 252.213-7000 where negative information within the Supplier Performance Risk System (SPRS) may render a quote being deemed technically unacceptable. Offerors shall include price, delivery terms, shipping costs (if applicable) and the following additional information with submissions: point of contact (including phone number and e-mail address), offeror CAGE Code, and offeror DUNS. Quotes shall be submitted electronically to Kristin.d.amarant.civ@us.navy.mil and must be received on or before Tuesday, 22 March 2022 at 2:00PM Eastern Standard Time (EST). Quotes received after this date and time are late and may not be considered for award. For questions pertaining to this acquisition, please contact Kristin Amarant at Kristin.d.amarant.civ@us.navy.mil
Web Link: SAM.gov Permalink
(https://sam.gov/opp/36c708fbcaf449e98de73bfde3df4243/view)
Place of Performance: Address: Dresden, NY 14441, USA; Zip Code: 14441; Country: USA
Record: SN06266153-F 20220316/220314230058 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

40 -- 145,000 lbf M.B.S. Mooring Line