SOURCES SOUGHT
H -- H--EC - MTE TOOL CALIBRATION CONTRACT
- Notice Date
- 3/2/2022 1:58:07 PM
- Notice Type
- Sources Sought
- NAICS
- 541380
— Testing Laboratories
- Contracting Office
- DENVER FED CENTER DENVER CO 80225 USA
- ZIP Code
- 80225
- Solicitation Number
- DOIRFBO220013
- Response Due
- 3/9/2022 4:00:00 PM
- Point of Contact
- Vance, Lisa, Phone: 801-524-3765, Fax: 4062477898
- E-Mail Address
-
lvance@usbr.gov
(lvance@usbr.gov)
- Description
- SOURCES SOUGHT SYNOPSIS FOR THE EASTERN COLORADO AREA OFFICE, Mt. ELBERT POWERPLANT TOOL CALIBRATION REQUIREMENT The Bureau of Reclamation Acquisition Management Division, Provo Area Office in collaboration with the Eastern Colorado Office, issues this special notice number DOIRFBO220013 for the Eastern Colorado Area Office, Mt. Elbert Powerplant Tool Calibration Requirement. This notice is for the purpose of determining potential offerors, capability, and small business status to support the requirement. THIS IS NOT A REQUEST FOR PROPOSALS, QUOTE, OR AN INVITATION FOR BIDS and does not constitute any commitment by the Government. No reimbursement will be made for any costs associated with providing information in response to this notice. All interested sources must respond to future solicitation announcements separately from responses to the sources sought notice. The information obtained may be used for the future solicitation and all interested parties must respond to future solicitation announcement separately. PRINCIPAL PERFORMANCE REQUIREMENT: The following is an example of the tools/equipment from previous calibration requirements. Many of these need to be done onsite to reduce the impact of an interruption in operations and those that are shipped, require a maximum one-month turnaround: Mechanical Description Part Number Previously Calibrated Onsite Snap-on 1/2� Drive 30-200 FTLB QJR3200C Yes Snap-on 3/8� Drive 0-100 FTLB QJR2100C Yes Snap-on 3/8� Drive 0-75 FTLB QJFR275D Yes Snap-on �� Drive 100-600 FTLB QD4600 Yes Snap-on ��Drive 30-200 FTLB QJR 3200C Yes Additel Auto Pressure Calibrator No Snap On 3/8 Drive 0-100 FTLB QDR2R00A Yes Snap On � Drive 4800 INLB Yes Electrical Description Part Number Previously Calibrated Onsite Fluke Multimeter 87 Yes Snap-on �� Drive 30-200 FTLB QJR3200C Yes Fluke Electrical Tester T5-1000 Yes Fluke Multimeter 87 Yes Fluke Clampmeter 336 Yes Fluke Multimeter 87 Yes Fluke Electrical Tester T5-600 Yes Fluke Clampmeter 336 Yes Megger DRLO 200-115 Yes Techre Block Calibrator DB-300AF No Techre Block Calibrator UCAL 400+ No Cementey 3/8� Drive insulated 50250TW38i Yes Jo Line �� Torque Wench G1502A1 Yes Imada Push-Pull Scale FB100 No Transcat Pressure Tester 23300P No Druck DP1620 CE No Megger MOM2 Yes Megger EZ-Thump12 Yes Digital Voltage Indicator DVI-500T Yes Druct 30 PSI DPI 104 Yes Druct 100 PSI DPI 104 Yes Druct 3000 PSI DPI 104 Yes Doble TDR 9100 Yes Megger MIT 430/2 Yes Cropico 4002 No Megger S1-1568 Yes Vanguard (Breaker Analyzer) CT-8000 No Megger MIT 430 Yes AEMC Simple Logger II L264 No Druck 30PSI PM 620 Yes Druck 620 300PSI PM 620 Yes Druck 1500PSI PM 620 Yes Fluke Thermal Imager FLK TI55FT-10/20 No Alber Cell Corder CRT-400 No Anton Paar Density Meter 35N 2900-09 No Fluke Digital Multi-Meter 87V Yes Fluke Clampmeter 381 Yes Fluke Multimeter 87 Yes Fluke Multimeter 87 Yes Fluke Clampmeter 381 Yes Fluke Multimeter 87 Yes Thermal Temp Gun No Megger TTR 20-1 Yes Cementex Torque Wrench 30200TW38 Yes Fluke Amp Clamp i310S Yes Fluke Amp Clamp T5-1000 Yes Fluke Amp Clamp i305 Yes Fluke Amp Clamp i310s Yes Fluke Amp Clamp i310s Yes Hubble Hot Stick Tester No Fluke Amp Clamp Meter 336 Yes Communications & Instrumentation Description Part Number Previously Calibrated Onsite Fluke Process Meter 789 Yes Fluke Process Meter 789 Yes Fluke Digital Multi-Meter 87V Yes Fluke RTD Calibration Meter 712 Yes Fluke RTD Calibration Meter 712 Yes Fluke Milliamp Process Meter 773 Yes Bird RF Watt Meter 43 No Omicron Relay Test Unit CMC-356 No Fluke 435 Yes Fluke 721 Yes Fluke Optical Pwr Meter Yes Fluke Micro Scanner Yes Fluke 867 Yes Fluke 130S Yes Fluke 130S Yes Fluke 130S Yes AEA TDR 6020-R5053 No Fluke 130S Yes Fluke T5-600 Yes Fluke T5-600 Yes SMALL BUSINESS CERTIFICATION WITH THE SMALL BUSINESS ADMINISTRATION (SBA): The North American Industry Classification System (NAICS) for this project is 541380 Testing Laboratories and Services, Small Business Size Standard $16.5 Million REQUESTED INFORMATION & RESPONSE: 1. Name, mailing address, phone number and email of designated point of contact. 2. Business Website address. 3. Information regarding business size and/or socioeconomic designation. 4. Capability to perform the work as identified under the principal performance requirement section including a statement of capability to perform some onsite calibrations to reduce the impact to operations. Responses shall be submitted no later than Wednesday, March 8th, 2022 by close of business. Responses shall be submitted via electronic mail only to Carlos Quiles at cquiles@usbr.gov Proprietary information, if any, should be minimal and MUST BE CLEARLY MARKED. All information submitted will not be returned. Contracting Office Address: 302 East Lakeview Parkway, PRO-901 Provo, Utah 84606-7317 Tool Location: Eastern Colorado Area Office, Mt. Elbert Powerplant 5583 East Hwy 82 Twin Lakes CO 81251 QUESTIONS Questions regarding this notice shall be submitted in writing, through e-mail, referencing DOIRFBO220013 EC MTE Tool Calibration to the Contracting Specialist, Carlos Quiles at cquiles@usbr.gov.
- Web Link
-
SAM.gov Permalink
(https://sam.gov/opp/814004027b6843e68334250e2dd1fe0e/view)
- Record
- SN06255575-F 20220304/220303211715 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |