SAMDaily.us | SRCSGT | 99 | Iraq Automated Biometric Identification System (IABIS)

SAMDAILY.US - ISSUE OF FEBRUARY 13, 2022 SAM #7379
SOURCES SOUGHT

99 -- Iraq Automated Biometric Identification System (IABIS)

Notice Date: 2/11/2022 6:01:55 AM
Notice Type: Sources Sought
NAICS: 541512 — Computer Systems Design Services
Contracting Office: ACC-ABERDEEN PROVING GROUNDS CONT C ALEXANDRIA VA 22331-0700 USA
ZIP Code: 22331-0700
Solicitation Number: W909MY22RA002
Response Due: 2/15/2022 9:00:00 AM
Point of Contact: Cheryl D. Beaty, Phone: 7037040862, Rosetta Wisdom-Russell
E-Mail Address: cheryl.d.beaty.civ@army.mil, rosetta.wisdom-russell.civ@army.mil
(cheryl.d.beaty.civ@army.mil, rosetta.wisdom-russell.civ@army.mil)
Description: THIS IS A REQUEST FOR INFORMATION (RFI) ONLY: THIS IS NOT A SOLICITATION: No award will be made as a result of this request. This RFI is for information and planning purposes only; this is not an Invitation for Bid (IFB), a Request for Proposal (RFP), or Request for Quotation (RFQ). No solicitation document exists and a formal solicitation may or may not be issued by the Government as a result of the responses to this RFI. The Government will not be liable for payment of any preparation expenses and information and materials received in response to this RFI and is in no way obligated by the information received. Any costs incurred by interested companies in response to this announcement will NOT be reimbursed. The information provided may be used by the Army in developing a future acquisition strategy, Performance Work Statement, Statement of Objectives and/or Performance Based Specification(s). Interested parties are responsible for adequately marking proprietary or competition sensitive information contained in their response. The Government shall not be liable for or suffer any consequential damages for any improperly identified proprietary information. If a solicitation is issued, it will be synopsized on the SAM.Gov. It is the responsibility of the potential interested parties to monitor this site for additional information pertaining to this requirement. NOTE: The use of RFI Number W909MY-22-R-A002 is for tracking purposes only and shall be referenced in any responses to this RFI. All interested parties are encouraged to respond by submitting by the date specified in this RFI. BACKGROUND DESCRIPTION: Background. An Iraq Automated Fingerprint Identification System (IAFIS) is at end of year life cycle support. ��A replacement system: Iraq Automated Biometric Identification System (IABIS) was sent to replace IAFIS in support of biometrics identity management operations.� It is the intent of the United States Government (USG) �to find a vendor to provide service and hardware in manufacturing/installation of equipment, provide logistical/ sustainment support, and hardware/software that may be needed. Objectives. The major objectives of this scope of work are to: Verify that the functionality and performance of the shipped IABIS system meets or exceeds all technical specifications in its intended operational environment in Iraq. Provide all Basic Life Support which include a security details for the �2 Field Service Rep supporting this mission. Install and configure IABIS and determine if additional hardware and/or software are needed. Sustain the production IABIS system to ensure high system availability Commission the IABIS system by loading the available data files from the IAFIS system and any other format that data may be provided not to exceed 10 million files. Train end-users on how to effectively use the system and leverage its capabilities to increase biometrics matching speed and accuracy Achieve Initial Operational Capability (IOC) at Contract Award + 364 Days or sooner Achieve Full Operational Capability (FOC) at Contract Award + option period or sooner (FOC is dependent on the Iraqis signed agreement to share data with the USG and then a virtual/internet link is established by the contractor with USG oversite). The period of performance shall consist of : One 12-month Base Year:�� April 2022 -March 2023 One 12-month Option Period: April 2023-March 2024. FSRs should be in-country no later than Contract Award +35. � Primary Work Location. The Contractor shall perform work mainly at: Ministry of Interior (MOI) Biometrics Center, Baghdad, Iraq. � RFI Submission Instructions PLEASE NOTE THAT IF A CHARACTERISTIC OR CAPABILITY IS NOT ADDRESSED THE GOVERNMENT WILL ASSUME THE RESPONDENT DOES NOT OR CANNOT MEET THE SALIENT CHARACTERISTICS OF THIS MARKET SURVEY. The Government requires two (2) documents; Cover Letter and Technical Narrative in your response. The document formats shall be: COVER LETTER: The response shall include a Cover Letter. The Cover Letter should briefly state the interested parties� interest in the Iraq Automated Biometric Identification System� (IABIS). The cover letter shall also include the following information: Subject: Iraq Automated Biometric Identification System� (IABIS): � Brief Summary of the company � Company name � Company CAGE Code: � Company DUNS Number. If your Company holds a GSA Schedule contract (541 or other), please provide the Schedule number ? Date of incorporation ? Number of years in business ? Number of employees ? Mailing address � Company Website address ? The singular point of contact for all information pursuant to this RFI. � Phone Number � Email address � Company email: � Company Representative and Business Title: � Company Socioeconomic Classification: � Please identify your company's business size standard based on the primary North American Industrial Classification System (NAICS) code of 541512 or 334118. For more information, refer to http://www.sba.gov/content/tablesmall-businesssize-standards: Small Business (SB), (8) (a), Woman-Owned (WOSB), Economically-Disadvantaged Women-Owned (EDWOSB), Veteran-Owned and Operated �(VOSB), Service-Disabled Veteran-Owned (SDVOSB), or Historically Underutilized Small Business-Zone �(HUB Zone), Historically Black College and Universities/ Minority Institutions (HBCU/MI). �In addition to the body of the cover letter, respondents shall provide short concise answers to the following questions (not included in the 3 page limit). In addition to the body of the cover letter, respondents shall provide short concise answers to the following questions (not included in the 3 page limit). Questions: Please identify your company's business size standard based on the primary North American Industrial Classification System (NAICS) code of 541512 or 334118. For more information, refer to http://www.sba.gov/content/tablesmallbusiness- size-standards: Small Business (SB), (8) (a) Woman-Owned (WOSB), Economically Disadvantaged Women-Owned (EDWOSB), Veteran-Owned and Operated (VOSB), Service-Disabled Veteran-Owned (SDVOSB), or Historically Underutilized Small Business-Zone (HUB Zone), Historically Black College and Universities/ Minority Institutions (HBCU/MI) � Name/type of technology or model Technology maturity: Existing technology or technology concept Brief overview of company history, limited to 3 paragraphs � If you identify your company as a Small Business or any of the SB subcategories above, then is your company interested in a prime contract? If so, does your company possess the capabilities to provide the entire range of these requirements? If not, please list which requirements your company can provide? � Under the current SB recertification regulations, do you anticipate your company remaining a small business, under primary stated NAICS code 541512 or 334118? � If you are a small business and plan to be prime contractor on this effort please inform how you will meet the limitations on subcontracting Clause 52.219-14. � � If you are a small business, can you go without a payment for 90 days? � If you are a small business does your company have experience as a prime contractor administering Contracts? If you answered yes, please provide as much of the following information as possible; Contract number(s); Dollar value; and similarity of scope and effort. Have you experience as a prime producing commercial items that may be of similar scope, complexity and nature. Please provide details regarding proposed joint ventures, teaming arrangements, strategic alliances, or other business arrangements to satisfy these requirements. Interested parties are encouraged to identify teams, indicating each team member's size based upon the NAICS code of the work that the team member may be doing. Has your Company performed this type of effort or similar type effort (to include size and complexity) in the past, if so provide Contract Number , Point of Contact (POC), e-mail address, phone number, and a brief description of your direct support of the effort? � A statement that the respondent either has or does not have an approved accounting system, as required in US Federal Acquisition Regulation (FAR) 16.301-3(a)(3) for cost-reimbursement contracts. �Has your company performed this type of effort or similar type effort (to include size and complexity) in the past?� If so, provide contract number, Point of Contact (POC), e-mail address, phone number, and a brief description of your direct support of the effort B. Technical Narrative Instructions. The Technical Narrative shall be submitted as two files. The content of each file shall be identical. The primary submission shall be MS Word*.docx format. A copy in Adobe *.PDF is also required. Page Size:�� 8.5 x 11.0 inches �� Margins:�� 1 inch all around, single Spaced typed lines �� Font:�� Arial or MS Sans Serif �� Font Size:�� 12 point Tables may use 10-point font.� Illustrations such as tables, flowcharts, organizational charts, process also may be included. The technical narrative submitted shall NOT exceed 10 pages, this can be provided as attachments and does not count toward the 10 page limitation. Will your company propose on this effort? Yes or No? If yes: indicate if your company is currently a small business based upon NAICS code 541512 or 334118. If a small business, indicate socioeconomic category. If a small business, indicate if your company would be capable and intend for at least 50 percent of the amount paid by the Government for contract performance to be performed by your company and any similarly situated subcontractors (See FAR 52.219-14 (DEVIATION 2019-O0003)). � Does your company consider this a Firm Fixed Price (FFP) effort, Time and Materials (T&M) or Cost Plus Fixed Fee (CPFF) type effort? � Does your company have a Secret Facility Clearance? Yes or No? Vendor shall provide past performance within the past 5 years of similar work. Vendor shall provide an understanding of Basic Life Support/Security Requirements. Vendor shall provide a methodology of loading data files into the IABIS that are in different file formats. IABIS Equipment Shipped Item Description Number of items HPE 42U 600x1075 G2 Shock Rack 6, PN: P9K38A, (UII 1644) 1 HP VH27 - LED Monitor (27""), PN:� 2KZ36AA, 26 HP VH27 - LED Monitor (27""), PN:� 2KZ36AA, UII Barcode, SNs: 26 HP VH27 - LED Monitor (27""), PN:� 2KZ36AA 16 Z2 G4 Workstation XEON E-2144G, PN: 2YW30AV 9 Color LaserJet Pro 400 M452dn, PN:� CF389A 2 Expressions 12000XL Flatbed Scanner, PN: 12000XL-GA 2 INT PWR SAVING BACK UPS PRO 1500 230v, PN: BR1500GI 8 LINE-R 1200VA Automatic Voltage Regulator (for EPSON Scanners), PN: LE1200I 2 Step Up and Step Down 1000W Voltage Converter Transformer (for HP Laser Printers 110v), PN:� PVTC100U 3 Aruba 3810M 24G 1-slot switch, PN: JL071A, UII Barcode, SNs: (UII 1265) SG92GYT01J, (UII 1266) SG92GYT02L 3810M Components to include: �� STD l G SPP RJ45T 100m Cat5e XCVR, PN: J8177D, SNs: N/A (Qty 4) �� STD HPB B3800 0.5M STACKING CABLE, PN: J9578A, SNs:� N/A (Qty 2) �� STD Aruba 3810M 4-port Stacking Module, PN: JL084A, SNs:� N/A (Qty 2) �� AC3 Aruba X371 12VDC 250W PS, PN:� JL085A, SNs:� N/A (Qty 4) �� STD Aruba 3810 Switch Pan Tray, PN: JL088A, SNs:� N/A (Qty 4) �� STD Version A Switch Rail Kit, PN:� J9583A, SNs:� N/A (Qty 2) 2 HPE OV 3yr 24x7 Supp Phys 1 Svr License (Certificates), PN: E5Y34A 92 ARUBA 3810 Switch Fan Tray, PN: JL088A 2 HPE Ultrium Universal Cleaning Cartridge, PN: C7978A, SNs: N/A 6 Premier Flex, LC/LC OM4 2f 1m Cable, PN:� QK732A, SNs: N/A 2 Premier Flex, LC/LC OM4 2f 5m Cable, PN:� QK734A, SNs: N/A 8 INT PWR SAVING BACK UPS PRO 1500 230v, PN:� BR1500GI, UII Barcode, SNs: 26 Farway Cordless Drill, PN:� 25V Hammer Drill 1 Z2 G4 Workstation XEON E-2144G, PN: 2YW30AV, UII Barcode, SNs: 25 Tool Kit, which includes: Panasonic Vacuum Cleaner (Box 1 of� 5) Kobalt 230 Tool Piece Set (Box 1 of� 5) trueCABLE Cat 6 Cable (Box 1 of� 5) Tekton 18"" Pry Bar (Box 1 of� 5) Honeywell Howard Leight Corded Ear Plugs (Box 1 of� 5) HPE External USB Network Adapter, With Cable (Box 1 of� 5) (2 each) Toshiba Power Adapter (Box 2 of� 5) Lockport Tape, Duct 2"" (Box 2 of� 5) Meidong Tape, Packing 2� (Box 2 of� 5) WorkShop Attachment, Vacuum Cleaner (1 of 2) (Box 2 of� 5) WorkShop Attachment, Vacuum Cleaner (2 of 2) (Box 2 of� 5) 1 OM3 LC/LC FC Cables PN: AJ837A 8 600mm Rack Stabilizer Kit - PN: BW932A 5 Advance Series Rack Tie Down Kit - PN: AF076A 5 G2 PDU Ext Bar Kit - PN: P9Q99A 8 MSL Ultrium Left Magazine Kit - Left PN: AG330A and Right PN 8 MSL Redundant Power Supply Kit PN: AH220A 2 Encryption Kits PN: AM495A 4 Rack Cable Management Kit - PN: AF099A 5 DAC Cables PN: JL271A and Nimble Rack Ext. Kit 4 X120 1G SFP RJ45 T Transceiver (61 each) - PN: JD089B 61 3.0M Blue CAT6 STP Cable Date (29 each) - PN: AF595A 29 0.9.0M Blue CAT6 STP Cable Date (40 each) - PN: AF594A 40 Miscellaneous: Rack Keys, Receptacles, and Misc. Cables - PN: N/A 5 HPE 42U 600x1075 G2 Shock Rack 1, PN: P9K38A 1 IABIS Storage Components (e.g., Tape Library, Switch, SAN, SAN EXT) 1 HPE 42U 600x1075 G2 Shock Rack 2, PN: P9K38A 1 IABIS Storage Components (e.g., Tape Library, Switch, SAN, SAN EXT) 1 ARUBA 7005 Switch and Rack Mount, PN: JW636A 1 HPE 42U 600x1075 G2 Shock Rack 3, PN: P9K38A 1 ARUBA 3810M Switch and Rack Mount, PN: JL072A 1 HPE 42U 600x1075 G2 Shock Rack 5, PN: P9K38A 1 HPE 42U 600x1075 G2 Shock Rack 4, PN: P9K38A, (UII 1574), SNs: 5UN90776GP 1 IABIS Storage Components (e.g., Tape Library, Switch, SAN, SAN EXT) 1 HPE 42U 600x1075 G2 Shock Rack 3, PN: P9K38A 1 ARUBA 3810M Switch and Rack Mount, PN: JL072A 1 HPE 42U 600x1075 G2 Shock Rack 5, PN: P9K38A 1 HPE 42U 600x1075 G2 Shock Rack 4, PN: P9K38A, (UII 1574), SNs: 5UN90776GP 1 IABIS Storage Components (e.g., Tape Library, Switch, SAN, SAN EXT) 1 � � Question and Answers: Responses shall be e-mailed to the Points of Contact listed below. Paper copies of the submittal will also be accepted.� Email responses should not exceed 5 Megabytes (MB). Send responses electronically to (Include ""RFI number W909MY-22-R-A002"" in the subject line.): Cheryl Beaty, Contract Specialist, email: cheryl.d.beaty.civ@army.mil and Rosetta Wisdom-Russell, Contracting Officer, email: rosetta.wisdom-russell.civ@army.mil. All information marked as proprietary information will be safeguarded to prevent disclosures to non-government personnel and entities. � Responses are due no later than 12:00 PM EST (local time at Fort Belvoir, VA) on 15 February 2022. All requests for information must be in writing or via email; telephonic requests for additional information will not be honored. You may forward request for additional information and/or responses to Cheryl Beaty, Contract Specialist at cheryl.d.beaty.civ@army.mil and Rosetta Wisdom-Russell, Contracting Officer, email: rosetta.wisdomrussell.civ@army.mil � Data Rights It is desirable that data be received with unlimited rights to the Government. However, it is recognized that proprietary data may be included with the information provided. If so, it is the responsibility of the interested party submitting data to clearly mark such proprietary information and clearly separate it from the unrestricted information as an addendum. No Classified data shall be provided via email. � Disclaimer Any information submitted by respondents to this sources sought synopsis is voluntary. The Army does not intend to award a contract on the basis of this notice or to otherwise pay for the information solicited. Respondents should not construe this synopsis as a commitment for any purpose. Respondents will not individually be notified of the results of any government assessments. The Government's evaluation of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small businesses, or any particular small business designation (e.g. SDVOSB, HUBZone, 8(a), SDB, WOSB, VOSB, etc.).� Respondents shall not be obligated to provide the services described herein and it is understood by the United States Government that the cost estimates provided as a result of this request are ""best"" estimates only. � � Notification: This notice is for planning purposes only and is not to be construed as a commitment by the US Government. This is not a solicitation announcement. No reimbursement will be made for any costs associated with providing information in response to this announcement, or any follow-up information requests. A decision not to respond to this RFI will not affect an industry vendor�s ability to compete for an award under any potential future RFP. Respondents to this announcement will not have an advantage during any potential future procurement as a result of their response. See section below for how to submit any questions/concerns. Responses Responses to this RFI shall be submitted through email (Contract Specialist Cheryl Beaty at Cheryl.b.beaty.civ@army.mil and Rosetta Wisdom-Russell Contracting Officer, email: rosetta.wisdom-russell.civ@army.mil) a. The closing date for this RFI is: 15 February, 2022 at b. The closing time for this RFI is: 12:00 PM EDT c. The deadline for submission of questions is: 15 February, 2022 at 12:00 PM EDT Proprietary information, if any, should be minimized and MUST BE CLEARLY MARKED and segregated from non-proprietary information. Submissions will not be returned. Further, the sensitivity of the data provided should not be greater than Unclassified, For Official Use Only (FOUO).��
Web Link: SAM.gov Permalink
(https://sam.gov/opp/9c40b8bf674547a992504120dde3529e/view)
Place of Performance: Address: IRQ; Country: IRQ
Record: SN06240984-F 20220213/220211230109 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

99 -- Iraq Automated Biometric Identification System (IABIS)