Loren Data's SAM Daily™

SAMDAILY.US - ISSUE OF NOVEMBER 18, 2021 SAM #7292
SOURCES SOUGHT

65 -- ORTHO Hand Set

Notice Date

11/16/2021 9:39:00 AM
 

Notice Type

Sources Sought
 

NAICS

339112 — Surgical and Medical Instrument Manufacturing
 

Contracting Office

262-NETWORK CONTRACT OFFICE 22L (36C262) LONG BEACH CA 90815 USA
 

ZIP Code

90815
 

Solicitation Number

36C26222Q0129
 

Response Due

11/23/2021 1:00:00 PM
 

Archive Date

12/23/2021
 

Point of Contact

Carlo Manuel, Carlo.manuel@va.gov, Phone: 562-503-7111
 

E-Mail Address

carlo.manuel@va.gov
(carlo.manuel@va.gov)
 

Awardee

null
 

Description

THIS REQUEST FOR INFORMATION (RFI) IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AND OTHER MARKET INFORMATION IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT DESCRIPTION This is NOT a solicitation announcement. This is a sources sought/RFI only. The purpose of this sources sought/RFI is to gain knowledge of potential qualified sources and their size classification relative to NAICS 339112 (size standard 1,000). Responses to this sources sought will be used by the Government to make appropriate acquisition decisions. After review of the responses to this sources sought, a solicitation announcement may be published. Responses to this sources sought synopsis are not considered adequate responses for a solicitation announcement. The Department of Veterans Affairs (VA), VISN 22 Network Contracting Office, is seeking sources that can provide an Esophageal Pressure Sensor that meets the following salient characteristics and specifications for VA Greater Los Angeles Healthcare System. Salient Characteristics/Specification The ortho hand/wrist set must include radius/dorsal /volar plates, gauges, positioners, screws, blades, and wires which are specific for the right and left hands. It must provide treatment options to the widest array of varying patient anatomies (large/small, thin/wide, brittle/strong, etc.). Components must be made from titanium materials with varying lengths, widths, thicknesses. The screw heads must be flush with the plates for soft tissue protection. Screws must provide free flowing and locking capabilities (+/- 15 degrees in all directions) for the screws in the plate and allow for intraoperative fine tuning. The items must provide wires for holding anatomical areas in place. The items must come in specifically designed trays that facilitate identification and sterilization while limiting mobility in order to prevent unnecessary shortages/loss. The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. Item list: INDIVIDUAL PRODUCT # MEDARTIS DESCRIPTION TOTAL QTY (1 System) A-6602.001 Instrument Tray for APTUS Radius, lower 1 A-6602.002 Instrument Tray for APTUS Radius, upper 1 A-6602.012 Implant Case APTUS Radius Plates 1 A-6602.013 Implant Case APTUS Radius Plates 1 A-6602.018 Implant Case APTUS Radius Plates 1 A-6602.035 Implant Case APTUS Radius Screws 1 M-6706 Lid f. Implant and Instr.Case 120x240mm 4 A-3830 2.5 Countersink for Cortical Screws, AO 1 A-2026 2.5/2.8 Drill Guide, TriLock Plus 1 A-2047 2.0-2.8 Plate Bending Pliers, with Pins 2 A-2060 Plate & Screw Holding Forceps, Angled 1 A-2310 1.2/1.5 Screwdriver, HD4, Self-Holding 1 A-2073 Cannulated Handle w/ Quick Connector,AO 2 A-2013 2.5/2.8 Screwdriver Blade, HD7, AO 4 M-6706 Lid f. Implant and Instr.Case 120x240mm 1 A-6602.017 Implant Case APTUS Radius Plates 1 A-6602.009 Instrument Case APTUS Radius 1 M-6707 Lid f. Implant and Instr.Case 240x240mm 1 A-6517 5/5 Case Effective Height 96mm 1 A-6501 Lid for 5/5 Case 1 A-6601.007 Instrument Tray APTUS Foot 1 A-6601.009 Instrument Case APTUS Foot 1 M-6706 Lid f. Implant and Instr.Case 120x240mm 1 A-2015 2.5/2.8 Sleeve for Screwdriver Blade HD7 2 A-2721 2.5 Drill Guide for Lag Screws 1 A-2722 2.5 Drill Guide, Scaled 1 A-2726 2.5 Drill Sleeve, Self-Holding 1 A-2727.01 Drill Guide Block Narrow ADAPTIVE II, L 1 A-2727.02 Drill Guide Block Narrow ADAPTIVE II, R 1 A-2727.03 Drill Guide Block ADAPTIVE II, Left 1 A-2727.04 Drill Guide Block ADAPTIVE II, Right 1 A-2727.05 Drill Guide Block Wide ADAPTIVE II, L 1 A-2727.06 Drill Guide Block Wide ADAPTIVE II, R 1 A-2727.13 Drill Guide Block FPL, Left 1 A-2727.14 Drill Guide Block FPL, Right 1 A-2730 2.5 Depth Gauge 1 A-2750 2.5 Plate Holding & Positioning Instr. 1 A-2794 2.5 Instr. for Restoration of Volar Tilt 1 A-6010.16 K-Wire Dispenser ""Ø1.6"", 185mm 1 A-7006 Bone Elevator Mini-Hohmann, 8x160mm 2 A-7007 Periosteal Elevator, 6x185mm 1 A-7009 Hook ""Tönnis"", 150mm 1 A-7012 Bone Holding Forceps, 140mm 1 A-7013 Wound Retractor Mini-Langenbeck, 20x6mm 2 A-2045 2.0-3.5 Plate Cutting Pliers 1 A-6010.12 K-Wire Dispenser ""Ø1.2"", 185mm 0.5 A-5700.08/1 2.5 Cortical Screw 08mm, HD7, 1/Pkg 5 A-5700.10/1 2.5 Cortical Screw 10mm, HD7, 1/Pkg 5 A-5700.11/1 2.5 Cortical Screw 11mm, HD7, 1/Pkg 5 A-5700.12/1 2.5 Cortical Screw 12mm, HD7, 1/Pkg 5 A-5700.13/1 2.5 Cortical Screw 13mm, HD7, 1/Pkg 5 A-5700.14/1 2.5 Cortical Screw 14mm, HD7, 1/Pkg 5 A-5700.15/1 2.5 Cortical Screw 15mm, HD7, 1/Pkg 5 A-5700.16/1 2.5 Cortical Screw 16mm, HD7, 1/Pkg 5 A-5700.18/1 2.5 Cortical Screw 18mm, HD7, 1/Pkg 5 A-5700.20/1 2.5 Cortical Screw 20mm, HD7, 1/Pkg 5 A-5700.22/1 2.5 Cortical Screw 22mm, HD7, 1/Pkg 5 A-5700.24/1 2.5 Cortical Screw 24mm, HD7, 1/Pkg 5 A-5700.26/1 2.5 Cortical Screw 26mm, HD7, 1/Pkg 5 A-5700.28/1 2.5 Cortical Screw 28mm, HD7, 1/Pkg 5 A-5700.30/1 2.5 Cortical Screw 30mm, HD7, 1/Pkg 5 A-5700.32/1 2.5 Cortical Screw 32mm, HD7, 1/Pkg 5 A-5700.34/1 2.5 Cortical Screw 34mm, HD7, 1/Pkg 5 A-3731 Twist Drill Ø2.6mm x 10mm, L61mm, AO 1 A-3733 Twist Drill Ø2.0mm x 40mm, L91mm, AO 2 A-5040.41/1 1.6 K-Wire, Trocar, 150mm, 1/Pkg 5 A-4200.40 1.5 Hook Plate 2 Hole, 2 Hooks, t0.6 1 A-4200.41 1.5 Hook Plate 4 Hole, 4 Hooks, t0.6 1 A-4750.101 2.5 ADAPTIVE II TriLock DistRad.Pl Vol L 2 A-4750.102 2.5 ADAPTIVE II TriLock DistRad.Pl Vol R 2 A-4750.103 2.5 ADAPTIVE II TriLock DistRad.Pl Vol L 1 A-4750.104 2.5 ADAPTIVE II TriLock DistRad.Pl Vol R 2 A-4750.105 2.5 ADAPTIVE II TriLock DistRad.Pl Vol L 2 A-4750.106 2.5 ADAPTIVE II TriLock DistRad.Pl Vol R 1 A-4750.107 2.5 ADAPTIVE II TriLock DistRad.Pl Vol L 1 A-4750.108 2.5 ADAPTIVE II TriLock DistRad.Pl Vol R 2 A-4750.109 2.5 ADAPTIVE II TriLock DistRad.Pl Vol L 2 A-4750.110 2.5 ADAPTIVE II TriLock DistRad.Pl Vol R 1 A-4750.111 2.5 ADAPTIVE II TriLock DistRad.Pl Vol L 1 A-4750.112 2.5 ADAPTIVE II TriLock DistRad.Pl Vol R 1 A-4750.123 2.5 TriLock Dist.Rad.FPL.Pl Volar Left 1 A-4750.124 2.5 TriLock Dist.Rad.FPL.Pl Volar Right 1 A-4750.125 2.5 TriLock Dist.Rad.FPL.Pl Volar Left 1 A-4750.126 2.5 TriLock Dist.Rad.FPL.Pl Volar Right 1 A-4750.131 2.5 TriLock Dist.Rad. SmallFragmentPlate 1 A-4750.132 2.5 TriLock Dist.Rad. SmallFragmentPlate 1 A-4750.133 2.5 TriLock Dist.Rad. SmallFragmentPlate 1 A-4750.134 2.5 TriLock Dist.Rad. SmallFragmentPlate 1 A-4750.135 2.5 TriLock Dist.Rad. SmallFragmentPlate 1 A-4750.17 2.5 TriLock Dist.Rad.Corr.Pl Volar Left 12 Hole, Narrow, t1.6 1 A-4750.18 2.5 TriLock Dist.Rad.Corr.Pl Volar Right 12 Hole, Narrow, t1.6 1 A-4750.19 2.5 TriLock Dist.Rad.Corr.Pl Volar Left 13 Hole, Narrow, Long, t1.6 1 A-4750.20 2.5 TriLock Dist.Rad.Corr.Pl Volar Right 13 Hole, Narrow, Long, t1.6 1 A-4750.31 2.5 TriLock Dist.Rad.Fract.Pl Volar Left 10 Hole, Narrow, Short, t1.6 1 A-4750.32 2.5TriLock Dist.Rad.Fract.Pl Volar Right 10 Hole, Narrow, Short, t1.6 1 A-4750.57 2.5 TriLock Dist.Rad. SmallFragmentPlate 5 Hole, Curved Left, t1.6 1 A-4750.58 2.5 TriLock Dist.Rad. SmallFragmentPlate 5 Hole, Curved Right, t1.6 1 A-4750.91 2.5 TriLock Plate 2/5 Hole Y, t1.6 1 A-4750.92 2.5 TriLock Plate 2/8 Hole Y, t1.6 1 A-5210.08/1 1.5 SpeedTip Screw 08mm, HD4, 1/Pkg 4 A-5210.10/1 1.5 SpeedTip Screw 10mm, HD4, 1/Pkg 4 A-5210.12/1 1.5 SpeedTip Screw 12mm, HD4, 1/Pkg 4 A-5210.14/1 1.5 SpeedTip Screw 14mm, HD4, 1/Pkg 4 A-5755.14/1 2.5 TriLock Express Screw 14mm,HD7,1/Pkg 4 A-5755.16/1 2.5 TriLock Express Screw 16mm,HD7,1/Pkg 4 A-5755.18/1 2.5 TriLock Express Screw 18mm,HD7,1/Pkg 4 A-5755.20/1 2.5 TriLock Express Screw 20mm,HD7,1/Pkg 4 A-5755.22/1 2.5 TriLock Express Screw 22mm,HD7,1/Pkg 4 A-5755.24/1 2.5 TriLock Express Screw 24mm,HD7,1/Pkg 4 A-5750.08/1 2.5 TriLock Screw 08mm, HD7, 1/Pkg 5 A-5750.10/1 2.5 TriLock Screw 10mm, HD7, 1/Pkg 5 A-5750.12/1 2.5 TriLock Screw 12mm, HD7, 1/Pkg 5 A-5750.14/1 2.5 TriLock Screw 14mm, HD7, 1/Pkg 10 A-5750.16/1 2.5 TriLock Screw 16mm, HD7, 1/Pkg 10 A-5750.18/1 2.5 TriLock Screw 18mm, HD7, 1/Pkg 10 A-5750.20/1 2.5 TriLock Screw 20mm, HD7, 1/Pkg 10 A-5750.22/1 2.5 TriLock Screw 22mm, HD7, 1/Pkg 10 A-5750.24/1 2.5 TriLock Screw 24mm, HD7, 1/Pkg 5 A-5750.26/1 2.5 TriLock Screw 26mm, HD7, 1/Pkg 5 A-5750.28/1 2.5 TriLock Screw 28mm, HD7, 1/Pkg 5 A-5750.30/1 2.5 TriLock Screw 30mm, HD7, 1/Pkg 5 A-5750.32/1 2.5 TriLock Screw 32mm, HD7, 1/Pkg 5 A-5750.34/1 2.5 TriLock Screw 34mm, HD7, 1/Pkg 5 A-4750.191S 2.5 TriLock Wrist Spanning Pl. Dorsal L 11 Hole, t1.6-3.4 1 A-4750.192S 2.5 TriLock Wrist Spanning Pl. Dorsal R 11 Hole, t1.6-3.4 1 A-4750.193S 2.5 TriLock Wr.SpanningPl Dors. Straight 11 Hole, t1.6-3.4 1 A-4750.41 2.5 TriLock Dist.Rad.FramePl Dorsal Left 18 Hole, Narrow, t1.6 1 A-4750.42 2.5TriLock Dist.Rad.FramePl Dorsal Right 18 Hole, Narrow, t1.6 1 A-4750.43 2.5 TriLock Dist.Rad.FramePl Dorsal Left 20 Hole, t1.6 1 A-4750.44 2.5TriLock Dist.Rad.FramePl Dorsal Right 20 Hole, t1.6 1 A-5045.41/1 1.6 K-Wire, 60mm, Olive 10mm, 1/Pkg 4 A-5045.42/1 1.6 K-Wire, 65mm, Olive 15mm, 1/Pkg 4 A-5045.43/1 1.6 K-Wire, 70mm, Olive 20mm, 1/Pkg 4 A-5045.44/1 1.6 K-Wire, 75mm, Olive 25mm, 1/Pkg 4 A-5045.45/1 1.6 K-Wire, 80mm, Olive 30mm, 1/Pkg 4 A-5045.46/1 1.6 K-Wire, 85mm, Olive 35mm, 1/Pkg 4 A-5040.21/1 1.2 K-Wire, Trocar, 150mm, 1/Pkg 10 Manufacture is: Medartis It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications. If you are interested and are capable of providing the sought out supplies/services, please provide the requested information as well as the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Please indicate the size status and representations of your business, such as but not limited to: Service Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.)? (2) Is your company considered small under the NAICS code identified under this RFI? (3) Are you the manufacturer, distributor, or an equivalent solution to the items being referenced above? (4) If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, point of Contact and size status (if available). (5) If you re a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? (6) Does your company have an FSS contract with GSA or the NAC or are you a contract holder with NASA SEWP or any other federal contract? If so, please provide the contract number. (7) If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the items/solution you are providing information for available on your schedule/contract? (8) Please provide general pricing of your products/solution for market research purposes. (9) Please submit your capabilities in regards to the salient characteristics being provided and any information pertaining to equal to items to establish capabilities for planning purposes? (10) Please review salient characteristics/statement of work (if applicable) and provide feedback or suggestions. If none, please reply as N/A. (11) Please provide your DUNS number. (12) Please provide a list of detail requirements and drawings. *** Submissions addressing Section (8) should show clear, compelling and convincing*** evidence that all equal to items"" meet all required salient characteristics. Responses to this notice shall be submitted via email to Carlo.manuel@va.gov. Telephone responses shall not be accepted. Responses must be received no later than Tuesday November 23, 2021 at 1:00 PM PST. If a solicitation is issued it shall be announced at a later date, and all interested parties must respond to that solicitation announcement separately from the responses to this request for information. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation.
 

Web Link

SAM.gov Permalink
(https://beta.sam.gov/opp/c410b19f6c424476b55631075eab3af2/view)
 

Place of Performance

Address: Department of Veterans Affairs Greater Los Angeles Healthcare System 11301 Wilshire Blvd, Los Angeles 90073, USA

Zip Code: 90073

Country: USA
 

Record

SN06178598-F 20211118/211116230127 (samdaily.us)
 

Source

SAM.gov Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |