SAMDaily.us | PRESOL | 49 | Aircraft Wheel/Parts Washer

SAMDAILY.US - ISSUE OF SEPTEMBER 10, 2021 SAM #7223
SOLICITATION NOTICE

49 -- Aircraft Wheel/Parts Washer

Notice Date: 9/8/2021 1:48:26 PM
Notice Type: Combined Synopsis/Solicitation
NAICS: 333318 — Other Commercial and Service Industry Machinery Manufacturing
Contracting Office: W7NL USPFO ACTIVITY NEANG 155 LINCOLN NE 68524-1801 USA
ZIP Code: 68524-1801
Solicitation Number: W50S8921QDN13
Response Due: 9/16/2021 11:00:00 AM
Archive Date: 10/01/2021
Point of Contact: Danielle A. Nuss, Phone: 4023098269
E-Mail Address: danielle.nuss.2@us.af.mil
(danielle.nuss.2@us.af.mil)
Small Business Set-Aside: SBA Total Small Business Set-Aside (FAR 19.5)
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation Number: W50S89-21-Q-DN13 is issued as a Request for Quote (RFQ) Solicitation Date: 8 September 2021 Description: Firm Fixed Priced Contract for the following items: Item 0001: Aircraft Wheel and Parts Washer � see attached Requirements Description Item 0002: Installation and Training (if applicable) Quotations Due: NLT 1:00 p.m. CST, 16 September 2021. �All questions must be submitted no later than 9:00 a.m. CST, 15 September 2021.� Quotes and questions may be emailed to danielle.nuss.2@us.af.mil or delivered to: USPFO for NE P & C, JFHQ Bldg 1, Room 2203, 2433 NW 24th Street, Lincoln NE� 68524-1801. Point(s) of Contact: Danielle Nuss, (402) 309-8269, danielle.nuss.2@us.af.mil Place of Contract Performance and FOB Destination: Nebraska Air National Guard, B600 Rm 118D, 2925 N.W. 25th St, Lincoln, NE 68524 Items shall be received and/or installation complete NLT 180 days ADC. This procurement is a 100% Small Business set-aside IAW FAR 19.502-2 (a).� The North American Industry Classification System (NAICS) Code is 333318 and the small business size standard is 1000 employees.� Classification Code is 49 � Maint./Repair Shop Equipment. *** To be considered for award, you or your company must be registered with SAM at https://www.sam.gov/portal/public/SAM/. Please note that electronic funds transfer through WAWF is the ONLY acceptable means of invoicing and payment. Refer to https://piee.eb.mil for registration information. Offerors must provide their DUNS number, CAGE/NCAGE code, and confirmation of their registration along with their quote. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2021-06, effective 12 July 2021. The Defense Priorities and Allocation System (DPAS) assigned rating is: none. The selected Offeror must comply with the following commercial item terms and conditions. Provision 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. Provision 52.212-2, Evaluation � Commercial Items applies and the following evaluation factor will be considered to meet the minimum requirements of the government: The contract will be awarded on the basis of best value (Technical, Past Performance, and Price). � -A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary. -Past Performance based on SPRS Supplier Risk Score to include CPARS and FAPIIS reports. Offerors must include a completed copy of the Provision 52.212-3, Offeror Representations and Certifications - Commercial Items with their offer. Clause 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of Clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.204-10, 52.209-6, 52.219-6, 52.219-28, 52.222-3, 52.222-19, 52.222-21, 52.222-26, 52.222-36, 52.222-50, 52.223-18, 52.225-13, 52.232-33. The following FARS provisions or clauses apply: 52.232-39, 52.232-40.� The following DFARS provisions or clauses apply: 252.203-7000, 252.203-7002, 252.203-7005, 252.204-7008, 252.204-7011, 252.204-7012, 252.204-7015, 252.204-7016, 252.204-7017, 252.204-7018, 252.223-7008, 252.225-7000, 252.225-7001, 252.225-7002, 252.225-7048, 252.225-7974, 252.232-7003, 252.232-7006 (will be incorporated in full text), 252.232-7010, 252.232-7017, 252.239-7098 and 252.244-7000.The full text of a FAR and DFARS provision or clause may be accessed electronically at https://www.acquisition.gov. 52.204-22�Alternative Line Item Proposal. As prescribed in�4.1008�, insert the following provision: Alternative Line Item Proposal�(Jan 2017) ��(a)�The Government recognizes that the line items established in this solicitation may not conform to the Offeror�s practices. Failure to correct these issues can result in difficulties in acceptance of deliverables and processing payments. Therefore, the Offeror is invited to propose alternative line items for which bids, proposals, or quotes are requested in this solicitation to ensure that the resulting contract is economically and administratively advantageous to the Government and the Offeror. ��(b)�The Offeror may submit one or more additional proposals with alternative line items, provided that alternative line items are consistent with�subpart� 4.10�of the Federal Acquisition Regulation. However, acceptance of an alternative proposal is a unilateral decision made solely at the discretion of the Government. Offers that do not comply with the line items specified in this solicitation may be determined to be nonresponsive or unacceptable. (End of provision) 252.211-7003�Item Unique Identification and Valuation. As prescribed in�211.274-6�(a)(1), use the following clause: ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016) (a)�Definitions. As used in this clause� �Automatic identification device� means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. �Concatenated unique item identifier� means� (1) For items that are serialized within the enterprise identifier,�the linking together of the unique identifier�data elements in order of the�issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2)� For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier�data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number;�and�serial number within the original part, lot, or batch number. �Data matrix� means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. �Data qualifier� means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. �DoD recognized unique identification equivalent� means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at�http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. �DoD item unique identification� means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. �Enterprise� means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. �Enterprise identifier� means a code that is uniquely assigned to an enterprise by an issuing agency. �Government�s unit acquisition cost� means� (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor�s estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor�s estimated fully burdened unit cost to the Government at the time of delivery. �Issuing agency� means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at�http://www.aimglobal.org/?Reg_Authority15459. �Issuing agency code� means a code that designates the registration (or controlling) authority for the enterprise identifier. �Item� means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. �Lot or batch number� means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. �Machine-readable� means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. �Original part number� means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. �Parent item� means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. �Serial number within the enterprise identifier� means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. �Serial number within the part, lot, or batch number� means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. �Serialization within the enterprise identifier� means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. �Serialization within the part, lot, or batch number� means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. �Type designation� means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. �Unique item identifier� means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. �Unique item identifier type� means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at�http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c)�Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) Delivered items for which the Government�s unit acquisition cost is $5,000 or more, except for the following line items: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (ii) Items for which the Government�s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: Contract Line, Subline, or Exhibit Line Item Number Item Description ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ (If items are identified in the Schedule, insert �See Schedule� in this table.) (iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____. (iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____. (v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability. (2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor. (3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology � International symbology specification � Data matrix; ECC200 data matrix specification. (4)�Data syntax and semantics of unique item identifiers.�The Contractor shall ensure that� (i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology � EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology � EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology � Transfer Syntax for High Capacity Automatic Data Capture Media. (5)�Unique item identifier. (i) The Contractor shall� (A) Determine whether to� (1)�Serialize within the enterprise identifier; (2)�Serialize within the part, lot, or batch number; or (3)�Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version; (C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and (D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version. (ii) The issuing agency code� (A) Shall not be placed on the item; and (B) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government�s unit acquisition cost. (11) Unit of measure. (12) Type designation of the item as specified in the contract schedule, if any. (13) Whether the item is an item of Special Tooling or Special Test Equipment. (14) Whether the item is covered by a warranty. (e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows: (1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at�252.232-7003�. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at�http://dodprocurementtoolbox.com/site/uidregistry/. (2) Embedded items shall be reported by one of the following methods� (i) Use of the embedded items capability in WAWF; (ii) Direct data submission to the IUID Registry following the procedures and formats at�http://dodprocurementtoolbox.com/site/uidregistry/;�or (iii) Via WAWF as a deliverable attachment for exhibit line item number�(fill in)�___, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423. (g)�Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items. (End of clause)
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/c14b01700f5840d2b9dae079c54142fe/view)
Place of Performance: Address: Lincoln, NE 68524, USA; Zip Code: 68524; Country: USA
Record: SN06125672-F 20210910/210908230130 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

49 -- Aircraft Wheel/Parts Washer