SOLICITATION NOTICE
59 -- Switches (Various)
- Notice Date
- 6/9/2021 10:20:34 AM
- Notice Type
- Presolicitation
- NAICS
- 335313
— Switchgear and Switchboard Apparatus Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- CM20206029
- Response Due
- 6/25/2021 8:59:00 PM
- Archive Date
- 07/10/2021
- Point of Contact
- Robert Varcho
- E-Mail Address
-
robert.varcho@dla.mil
(robert.varcho@dla.mil)
- Description
- Indefinite Delivery Contract (IDC) Project CM20206029 - Synopsis Nine (9) National Stock Number with Estimated Annual Demand Quantity (ADQ): CLIN 0001: NSN 5930-00-804-3694���� ADQ: 228 CLIN 0002: NSN 5930-01-032-3659���� ADQ: 250 CLIN 0003: NSN 5930-01-051-6070���� ADQ: 291 CLIN 0004: NSN 5930-01-052-2457���� ADQ: 114 CLIN 0005: NSN 5930-01-123-6516���� ADQ: ��26 CLIN 0006: NSN 5930-01-189-0493���� ADQ:� �42 CLIN 0007: NSN 5930-01-296-1138���� ADQ: 131 CLIN 0008: NSN 5905-01-363-0668���� ADQ: ��28 CLIN 0009: NSN 5930-01-558-4317���� ADQ:� �68 Unit of Issue: EA Destination Information: Various DLA Stocking Locations This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Dealers will be required to submit traceability documentation back to the approved source. Freight on Board (F.O.B.) will be at Origin and Inspection/Acceptance will be at Destination. The proposed procurement will be an Indefinite Delivery Contract (IDC), and will be for a total of two (2) years, to consist of one (1) base year and one (1) option year. The option year may be exercised at the discretion of the Government. Based upon market research, the Government is using the policies contained in FAR Sub Part 13.5 � Simplified Procedures for Certain Commercial Items in its solicitation for the described supplies. This will be solicited as Unrestricted. The solicitation will be available on the DLA Internet Bid Board System (DIBBS) at https://www.dibbs.bsm.dla.mil/rfp/default.aspx on or about its estimated issue date of July 26, 2021. Specifications, plans, or drawings are not available. RESPONSE DATE: Offers/Responses will be due prior to the closing date and time specified in Block 8 (Offer Due Date/Local Time) on Page 1 of Standard Form (SF) 1449 (Solicitation/Contract/Order for Commercial Items). All responsible sources may submit an offer/proposal, which shall be considered. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, and other evaluation factors, as described in the solicitation. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. Procurement Item Description (PID), Packaging and Marking Text: - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. CLIN 0001: NSN: 5930-00-804-3694 � ���� SWITCH, TOGGLE ���� REFERENCE NUMBER: RP001 ���� REFERENCE NUMBER: A1202 ���� REFERENCE NUMBER: RA001 ���� REFERENCE NUMBER: RQ002 ���� REFERENCE NUMBER: RQ011 ���� REFERENCE NUMBER: ZD080 ���� REFERENCE NUMBER: CS241 ���� REFERENCE NUMBER: CS199 ���� REFERENCE NUMBER: E0201 ���� REFERENCE NUMBER: ZD074 ���� CRITICAL APPLICATION ITEM ���� MASON ELECTRIC CO. 81579 P/N 421506 ���� PREP FOR DELIVERY ���� LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. CLIN 0002: NSN: 5930�01-032-3659 ���� SWITCH, TOGGLE ���� REFERENCE NUMBER: A1202 ���� REFERENCE NUMBER: RP001 ���� REFERENCE NUMBER: RA001 ���� REFERENCE NUMBER: RQ002 ���� REFERENCE NUMBER: RQ011 ���� REFERENCE NUMBER: CS241 ���� REFERENCE NUMBER: CS199 ���� REFERENCE NUMBER: E0116 ���� REFERENCE NUMBER: ZD074 ���� CRITICAL APPLICATION ITEM ���� MASON ELECTRIC CO. 81579 P/N 306-4307 ���� PREP FOR DELIVERY ���� LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. CLIN 0003: NSN: 5930-01-051-6070 ���� SWITCH, SLIDE ���� REFERENCE NUMBER: RP001 ���� REFERENCE NUMBER: RA001 ���� REFERENCE NUMBER: RQ002 ���� REFERENCE NUMBER: RQ011 ���� REFERENCE NUMBER: ZD080 ���� REFERENCE NUMBER: E0165 ���� REFERENCE NUMBER: EVC01 ���� REFERENCE NUMBER: ZD025 ���� REFERENCE NUMBER: ZD074 ���� CRITICAL APPLICATION ITEM ���� MASON ELECTRIC CO. 81579 P/N 315-4303 ���� PREP FOR DELIVERY ���� LINE ITEM 00007 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. CLIN 0004: NSN: 5930-01-052-2457 ���� SWITCH, SLIDE ���� REFERENCE NUMBER: RP001 ���� REFERENCE NUMBER: RQ032 ���� REFERENCE NUMBER: RA001 ���� REFERENCE NUMBER: RQ002 ���� REFERENCE NUMBER: RQ011 ���� REFERENCE NUMBER: ZD080 ���� REFERENCE NUMBER: E0165 ���� REFERENCE NUMBER: ZD025 ���� REFERENCE NUMBER: ZD074 ���� MASON ELECTRIC CO. 81579 P/N 385-4305 ���� IAW REFERENCE DRAWING NR 81755 C8736 ���� REVISION NR G�� DTD 03/18/1982 ���� PART PIECE NUMBER: C8736-2 ���� PREP FOR DELIVERY ���� LINE ITEM 00008 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. CLIN 0005: NSN: 5930-01-123-6516 ��� �SWITCH, SLIDE ���� REFERENCE NUMBER: RP001 ���� REFERENCE NUMBER: A1202 ���� REFERENCE NUMBER: RA001 ���� REFERENCE NUMBER: RQ002 ���� REFERENCE NUMBER: RQ011 ���� REFERENCE NUMBER: ZD074 ���� REFERENCE NUMBER: ZD080 ���� REFERENCE NUMBER: CS241 ���� REFERENCE NUMBER: CS199 ���� MASON ELECTRIC CO. 81579 P/N 997-0135 ���� PREP FOR DELIVERY ���� LINE ITEM 00010 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. CLIN 0006: NSN: 5930-01-189-0493 ���� SWITCH, TOGGLE ���� REFERENCE NUMBER: RP001 ���� REFERENCE NUMBER: A1202 ���� REFERENCE NUMBER: RA001 ���� REFERENCE NUMBER: RQ011 ���� REFERENCE NUMBER: ZD074 ���� REFERENCE NUMBER: CS241 ���� REFERENCE NUMBER: CS199 ���� CRITICAL APPLICATION ITEM ���� MASON ELECTRIC CO. 81579 P/N 407-4313 ���� PREP FOR DELIVERY ���� LINE ITEM 00011 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. CLIN 0007: NSN: 5930-01-296-1138 ���� SWITCH, TOGGLE ���� REFERENCE NUMBER: RP001 ���� REFERENCE NUMBER: RQ032 ���� REFERENCE NUMBER: RD002 ���� REFERENCE NUMBER: RA001 ���� REFERENCE NUMBER: RQ011 ��� USE MATERIAL PER SAE AMS-QQ-A-250/4 IN LIEU OF QQ-A-250/4 ���� REFERENCE NUMBER: ZD025 ���� REFERENCE NUMBER: ZD074 ���� CRITICAL APPLICATION ITEM ���� MASON ELECTRIC CO. 81579 P/N 407-4339 ���� IAW REFERENCE DRAWING NR 81755 C12151 ���� REVISION NR F�� DTD 09/01/1993 ���� PART PIECE NUMBER: C12151-3 ���� IAW REFERENCE DRAWING NR 81755 C12151-3 ���� REVISION NR���� DTD 01/29/2020 ���� PART PIECE NUMBER: ���� PREP FOR DELIVERY ���� LINE ITEM 00014 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. CLIN 0008: NSN: 5905-01-363-0668 ��� �RESISTOR, VARIABLE, NONWIRE WOUND, NONPRECISION ���� REFERENCE NUMBER: RP001 ���� REFERENCE NUMBER: RD002 ���� REFERENCE NUMBER: RA001 ���� REFERENCE NUMBER: RQ011 ���� REFERENCE NUMBER: RQ017 ���� REFERENCE NUMBER: E0116 ���� REFERENCE NUMBER: ZD074 ���� CRITICAL APPLICATION ITEM ���� MASON ELECTRIC CO. 81579 P/N 971-0001 ���� PREP FOR DELIVERY ���� LINE ITEM 00015 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 ���� QUP:001� PRES MTHD:41� CLNG/DRY:1� PRESV MAT:00 ���� WRAP MAT:00� CUSH/DUNN MAT:NA� CUSH/DUNN THKNESS:A ���� UNIT CONT:D4� OPI:M ���� INTRMDTE CONT:E5� INTRMDTE CONT QTY:100 ���� PACK CODE:U ���� MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. ���� SPECIAL MARKING CODE:ZZ -ZZ Special Requirements ���� PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING ����� REQUIREMENTS FOR PROCUREMENT ���� REFERENCE NUMBER:ZD009 ���� ZZ - ADDITIONAL SPECIAL MARKING: ���� REFERENCE NUMBER:ZD009 ���� CONTROLLED ITEM. SPECIAL MARKINGS REQUIRED ���� PER MIL-STD-129, PARAGRAPH 5.4.1.6 (PROTECTED ���� CARGO): THE ITEM DESCRIPTION (NOMENCLATURE) ���� SHALL BE OMITTED FROM THE MIL-STD-129 LABEL ���� FOR ALL SHIPPING CONTAINERS. ���� 40 - OMISSION OF MARKING FOR SENSITIVE, ���� CONTROLLED, OR PILFERABLE ITEMS PER ���� MIL-STD-129. CLIN 0009: NSN: 5930-01-558-4317 ���� SWITCH, TOGGLE ���� REFERENCE NUMBER: RA001 ���� REFERENCE NUMBER: RP001 ���� REFERENCE NUMBER: RQ011 ���� REFERENCE NUMBER: E0115 ���� REFERENCE NUMBER: ZD074 ���� MASON ELECTRIC CO. 81579 P/N 407-4388 ���� PREP FOR DELIVERY ���� LINE ITEM 00016 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. ************************************************************************************* �GLOSSARY �************************************************************************************* PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ���� All DLA Master List of Technical and Quality Requirements take ����� precedence over ASTM D3951. ���� Mark and label all packaging and packing in accordance with MIL-STD-129. ���� The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be ����� as specified in the contract/purchase order. ���� PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING ����� REQUIREMENTS FOR PROCUREMENT ITEM DESCRIPTION TEXT ���� REFERENCE NUMBER RP001 ���� RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ���� REFERENCE NUMBER A1202 ���� Casting/forging may be required to manufacture this NSN.� If a ���� casting/forging is required, tooling is typically involved. The ���� government may not have this special tooling. For sourcing, tooling, ���� materials or other information, please contact the appropriate ���� assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land ���� & Maritime Supply Chains) DSCC.cast.forge@dla.mil ���� REFERENCE NUMBER RA001 ���� RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. ���� REFERENCE NUMBER RQ002 ���� RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL ���� REQUEST FOR VARIANCE (DEVIATION OR WAIVER) ���� REFERENCE NUMBER RQ011 ���� RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ���� REFERENCE NUMBER ZD080 ���� SAMPLING: ���� THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ ���� H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE ���� SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, ���� STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR ���� AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF ���� VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ���� ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE ���� SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER ���� MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR ���� PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT ���� SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT ���� UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. ���� REFERENCE NUMBER CS241 ���� NOTE: THIS IS A RESTRICTED SOURCE ITEM AND ���� REQUIRES ENGINEERING SOURCE APPROVAL BY THE � ���GOVERNMENT DESIGN CONTROL ACTIVITY. ���� REFERENCE NUMBER CS199 ���� ALTERNATE OFFEROR REQUIREMENTS: ���� THE FOLLOWING DOCUMENTATION IS REQUIRED IN ���� ACCORDANCE WITH MIL-T-31000.� (A) ALL DRAWINGS ���� AND SPECIFICATIONS REQUIRED FOR MANUFACTURE. ���� (B) PROCESS/OPERATION SHEETS WHICH DESCRIBE ���� IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED ���� INSPECTION/ACCEPTANCE CRITERIA.� (C) ���� IDENTIFICATION OF SOURCES WHO WILL PERFORM ���� CRITICAL PROCESSES/OPERATIONS, INCLUDING ���� SOURCES OF FORGINGS AND CASTINGS.� (D) IF ���� AVAILABLE COPIES OF PURCHASE ORDERS FROM THE ���� ITEM.� (E) A SHOCK EXTENSION REPORT IN ���� ACCORDANCE WITH MIL-S-901 AND IN A FORMAT AS ���� SPECIFIED IN DI-ENVR-80706 IS REQUIRED. ���� IF THE OEM'S DETAILED DRAWINGS ARE NOT ���� AVAILABLE, THE OFFEROR MUST SUPPLY AN ���� ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW ���� THEIR DRAWINGS WERE DEVELOPED.� ADDITIONALLY, ���� IF REVERSE ENGINEERING WAS USED, THE COMPLETE ���� PROCEDURE WILL BE REPORTED INCLUDING: NUMBER ���� OF SAMPLES, METHODS AND MEASURES USED, ALL DATA ���� COMPILED, RATIONALE FOR DIMENSION TOLERANCE ���� DEVIATION, AND RATIONALE FOR ACCEPTANCE.� THIS ���� DATA WILL BE FORWARDED TO THE ENGINEERING ���� SUPPORT ACTIVITY FOR EVALUATION. ��� �REFERENCE NUMBER E0201 ���� THIS ITEM MUST BE MANUFACTURED IN ACCORDANCE ���� WITH THE LIMITED RIGHTS DATA LISTED. THE ���� GOVERNMENT CANNOT PROVIDE THE DATA. ONLY THOSE ���� VENDORS WHO HAVE ACCESS TO THE DATA SHOULD ���� QUOTE. ���� REFERENCE NUMBER ZD074 ���� THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM - (TO INCLUDE 'COMMERCIAL ���� OF A TYPE') ���� REFERENCE NUMBER IP025 ���� IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS ���� REFERENCE NUMBER E0116 ���� ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE ���� OFFERS IS NOT AVAILABLE AT THE PROCUREMENT ���� AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE ���� DATA PACKAGE INCLUDING DATA FOR THE APPROVED ���� AND ALTERNATE PART FOR EVALUATION. ���� REFERENCE NUMBER E0165 ���� THE TECHNICAL DATA CITED IN THIS SOLICITATION IS ���� NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST ���� MEET THE REQUIREMENTS OF THE CITED TECHNICAL ���� DATA IN ADDITION TO THE REQUIREMENTS OF THE ���� PART NUMBERED ITEM LISTED ON THIS SOLICITATION. ���� REFERENCE NUMBER EVC01 ���� VENDOR ITEM CONTROL DRAWING (NEW CODE) ���� REFERENCE NUMBER ZD025 ���� MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL ���� NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT ���� CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED ���� UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY ���� USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED ���� INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; ���� AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. ���� PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS ���� CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN ���� A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR ���� MERCURY COMPOUND. (IAW NAVSEA 5100-003D). ���� REFERENCE NUMBER RQ032 ���� RQ032: EXPORT CONTROL OF TECHNICAL DATA ���� This item has technical data some or all of which is subject to ���� export-control of either the International Traffic in Arms regulations ���� (ITAR) or the Export Administration Regulations (EAR), and cannot be ���� exported without prior authorization from either the Department of State ���� or the Department of Commerce. Export includes disclosure of technical ���� data to foreign persons and nationals whether located in the United ���� States or abroad. This requirement applies equally to foreign national ���� employees and U.S. companies and their foreign subsidiaries. DFARS ���� 252.225-7048 is applicable to this data. ���� The Defense Logistics Agency (DLA) limits distribution of export-control ���� technical data to DLA contractors that have an approved US/Canada Joint ���� Certification Program (JCP) certification, have completed the ���� Introduction to Proper Handling of DOD Export-Controlled Technical Data ���� Training and the DLA Export-Controlled Technical Data Questionnaire ���� (both are available at the web address given below), and have been ���� approved by the DLA controlling authority to access the ���� export-controlled data. Instructions for obtaining access to the ���� export-controlled data can be found at: ���� https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ ���� To be eligible for award, offerors and any sources of supply proposed ��� �for use are required to have an approved JCP certification and have ���� been approved by the DLA controlling authority to access ���� export-controlled data managed by DLA. DLA will not delay award in ���� order for an offeror or its supplier to apply for and receive approval ���� by the DLA controlling authority to access the export-controlled data. ���� REFERENCE NUMBER PKHAZ ���� Start of Hazardous Packaging Data ���� HAZARDOUS PACKAGING STATEMENT ���� PACKAGING DATA: SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS ����� MATERIALS PACKAGING REQUIREMENTS. ���� PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS SHALL COMPLY WITH ���� APPLICABLE REGULATIONS, I.E., TITLE 49 CODE OF FEDERAL REGULATIONS, ���� INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO) TECHNICAL INSTRUCTIONS ���� (EXCLUDING PARAGRAPH 1.4 OF CHAPTERS 1 AND 3), AND INTERNATIONAL ���� MARITIME DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG COMPLY WITH ���� UNITED NATIONS (UN) RECOMMENDATIONS ON TRANSPORT OF DANGEROUS GOODS. ���� WHEN A CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES SHIPMENT THROUGH ���� A MILITARY AERIAL PORT FOR TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING ���� SHALL COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS MATERIALS FOR ���� MILITARY AIR SHIPMENT. ���� LABELING AND MARKING: ALL INTERIOR AND EXTERIOR CONTAINERS SHALL BE ���� LABELED AND MARKED AS SPECIFIED IN THE REFERENCED PRODUCT SPE ���� CIFICATION, AND/OR AS SPECIFIED IN SECTION C OF THE CONTRACT OR ORDER. ���� IN ADDITION, ALL LABELING AND MARKING SHALL COMPLY WITH THE ���� REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR, AND, AS APPLICABLE, ICAO ���� TECHNICAL INSTRUCTIONS, IMDG ANNEX 1, AND/OR DLAI 4145.3. ���� CERTIFICATION: ALL PACKAGING PERFORMANCE TEST REQUIREMENTS SHALL BE ���� SUPPORTED BY CERTIFICATES AND REPORTS ATTESTING TO DATE OF TESTING AND ���� DATA RESULTS OBTAINED FROM TESTING. THE CONTRACTOR'S SIGNED ���� CERTIFICATION THAT PACKAGE CONFIGURATION MEETS 49 CFR, AND, AS ���� APPLICABLE, ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS, SHALL BE ���� INCLUDED ON THE DD FORM 250 (MATERIAL INSPECTION AND RECEIVING REPORT), ���� OR ANY SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL ���� CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR INSPECTION BY AUTHORIZED U. ���� S. GOVERNMENT REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3 YEARS ���� FROM DATE OF SHIPMENT. ���� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ���� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ���� WITH ASTM D3951. ���� ���� End of Hazardous Packaging Data ���� REFERENCE NUMBER RD002 ���� RD002, COVERED DEFENSE INFORMATION APPLIES ���� REFERENCE NUMBER J5930 ���� PRESERVATION AND PACKAGING SHALL BE IAW THE ���� LATEST REVISION OF MILITARY SPECIFICATION: ���� MIL-DTL-28786, FOR SWITCHES. �����REFERENCE NUMBER RQ017 ���� RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING ���� REFERENCE NUMBER ZD009 ���� UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH ���� (a) In addition to all other marking requirements in this contract, the ���� Contractor shall apply one of the ���� assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of ���� IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit ���� boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify ���� Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of ���� the item being acquired. Placement of the markings shall be in ���� accordance with paragraph 6.1 of the standard. ���� (b) Copies of the current version of this standard may be purchased or ���� downloaded from the Association ���� Connecting Electronics Industry (IPC), http://www.ipc.org, or the Solid ���� State Technology Association ���� (JEDEC), http://www.jedec.org. ���� REFERENCE NUMBER E0115 ���� NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS ���� REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE ���� INCLUDING DATA FOR THE APPROVED AND ALTERNATE ���� PART FOR EVALUATION.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/315b89a925284e8e866aa5abb4ccb194/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN06026892-F 20210611/210609230121 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |