AWARD
66 -- Dissolution Vessel Washer
- Notice Date
- 5/12/2021 11:16:11 AM
- Notice Type
- Award Notice
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- FDA OFFICE OF ACQ GRANT SVCS Beltsville MD 20705 USA
- ZIP Code
- 20705
- Solicitation Number
- 75F40121P00196
- Archive Date
- 05/27/2021
- Point of Contact
- Michael Gemmill
- E-Mail Address
-
Michael.Gemmill@fda.hhs.gov
(Michael.Gemmill@fda.hhs.gov)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Award Number
- 75F40121P00196
- Award Date
- 05/12/2021
- Awardee
- DISTEK, INC North Brunswick NJ USA
- Award Amount
- 18544.00
- Description
- The contractor shall provide a Dissolution Vessel Washer. The instrument shall meet or exceed the following requirements: ? The instrument shall consist of a rinse tank and a waste tank contained in a mobile unit with pumps and universal wash module. ? The universal wash module shall have a wash nozzle and drain assembly that empties a dissolution vessel, then performs a complete 360� wash that provides a thorough cleaning of the entire vessel in less than 60 seconds. ? The universal wash module shall have the ability to securely fit into any (U. S. Pharmacopeia (USP) conforming 1 Liter vessel, regardless of the bath or vessel manufacturer. ? The universal wash module shall have a self-adjusting drain that allows for vessel height variations. ? The instrument shall have an integrated shaft rinse wand that provides a method for cleaning the shaft and stirring elements on the dissolution apparatus. ? The instrument shall have the capability of cleaning at least 28 1 Liter vessels in under 15 minutes. ? The rinse tank shall have a volume of at least 38 Liters. ? The rinse tank shall have electric level sensors for full/empty determination and a sight gauge indicator. ? The rinse tank shall have a fill port equipped with quick disconnect fittings on the top cover and automatic shut-off capability. ? The waste tank shall have a volume of at least 76 Liters. ? The waste tank shall have electric level sensors for full/empty determination and a sight gauge indicator. ? The instrument shall have temperature control with an electronic immersion heater with a temperature range from 25� to at least 60�C. ? The instrument shall have a continuous LED display of rinse tank temperature. ? The instrument shall have a RS-232 and a USB 2.0 interface port. ? The instrument shall be constructed with acid resistant heating elements. ? The instrument shall have electrical power of 115V � 15V, 50/60 Hz, and 10A preset at the factory. ? The instrument body must not exceed the following measurements: 26 inches in width, 26 inches in depth and 39 inches in height. Trade and Service Specifications ? The instrument and parts within must be a newly manufactured unit, not used and refurbished or previously used for demonstration. ? The entire system must be warranted for parts and labor for 12 months from the date of formal government acceptance. The vendor must also be capable of servicing the instrument through the covered warranty period. The system must include at least a one (1) year warranty and shall include at a minimum: coverage on all non-consumable items and parts supplied including base instrument, factory-certified replacement parts, engineer labor and travel costs. Any equipment repair and maintenance work shall be performed by an OEM-trained engineer. This factory-trained engineer shall have (verified by the OEM) the following: 1) access to OEM factory telephone support; 2) access to the most current OEM factory training for both hardware and software components; and 3) access to all current OEM factory parts, not build-to-order parts. The OEM-trained service engineer shall not use salvaged parts from other instruments for performing maintenance and repairs. All parts used in PM and repairs must be guaranteed, factory-tested, OEM quality parts.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/3bd564acbbf942bf8f5b2446bd38e0ec/view)
- Place of Performance
- Address: Irvine, CA 92612, USA
- Zip Code: 92612
- Country: USA
- Zip Code: 92612
- Record
- SN05999063-F 20210514/210512230109 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |