SOURCES SOUGHT
38 -- Notice of Intent-Brand Name
- Notice Date
- 12/3/2020 11:48:30 AM
- Notice Type
- Sources Sought
- NAICS
- 333120
— Construction Machinery Manufacturing
- Contracting Office
- US ARMY ENGINEER DISTRICT HUNTINGTO HUNTINGTON WV 25701-5000 USA
- ZIP Code
- 25701-5000
- Solicitation Number
- W9123721Q0024
- Response Due
- 12/8/2020 12:00:00 PM
- Archive Date
- 12/23/2020
- Point of Contact
- Cynthia A Oxley, Phone: 3043995337
- E-Mail Address
-
cynthia.a.oxley@usace.army.mil
(cynthia.a.oxley@usace.army.mil)
- Description
- THIS SOURCES SOUGHT NOTICE IS FOR INFORMATIONAL PURPOSES ONLY.� THIS IS NOT A REQUEST FOR BIDS/PROPOSAL.� No reimbursement will be made for any costs associated with providing information in response to this notice or any follow-up information requests. This is a SOURCES SOUGHT NOTICE for Market Research ONLY to determine the availability of Brand Name Items. The United States Army Corps of Engineers, Huntington District intends to include the following proprietary items in a solicitation for a supply acquisition under authority of FAR 6.302-1(c)(1), only one responsible source and no other supplies or services will satisfy agency requirements. This project may include a Brand Name only component, as described below, unless the results of this sources sought notification indicates otherwise. This notification serves three purposes: (1) to notify potential Offerors of the Government's intent to solicit a brand name only component under a future supply purchase; (2) to identify potential sources that can provide the brand name only item and/or equivalent; (3) notification of the Army's intent to contract sole source for a Brand Name Only, if the market is unable to provide equivalent' products. In the event no equivalent equipment exists, the Brand Name Only justification will be issued pursuant to FAR Part 6.302-1(c)(1), ""Only One Responsible Source and no other supplies or services will satisfy agency requirements"". A subsequent market survey will not be published in support of a Justification and Approval (J&A) for sole sourcing the resultant product(s) or system(s) in the event an equivalent product is not submitted for consideration. In such instances, the brand name or equal component will be issued/solicited competitively. Only that part of the project requiring brand name components will be sole source if no sources are able to prove an equal product. SUMMARY OF REQUIREMENT: The supply purchase will include Brand Name only equipment as follows: The contractor shall supply one Manitowoc MLC300 crane and accompanying parts. The crane will be placed and installed on a floating barge with dimensions of 195� x 54� and a hull depth a 10�. The crane shall meet the following requirements: 386 US Ton (350 metric Ton) lifting capacity Engine rated for 450 HP (336 kW) at 1800 RPM 177.2� (54 m) Boom 48� (1.2 m) Crawler Pads Rotating bed mounted 36,760 lb. (16,650 kg) line pull auxiliary drum with quick disconnects for hoist piping, grooved for 28 mm wire rope Crane shall come equipped with a Variable Position Counterweight system Must be capable of lifting 115,000 lbs at 100� radius Rear swing radius shall not extend past 28� 2� Rear swing radius with the mast stowed shall not extend past 30� 2� Width of crawler base must be 26� 5� Length of crawler base must be 31� 10� Clearance of counterweight tray to the deck must be 5� 145-gallon hydraulic reservoir equipped with sight gauge, breather, clean out access, 100 micron mesh internal strainers, and 40 micron inlet screens Upon award of the contract, the computer (LMI) shall be loaded with 3-degree charts which will be provided by USACE. A remotely located wireless anemometer (wind speed indicator) shall be located on the boom tip as per manufacturers design. Additional Accompanying Parts � Accessories Twenty (20) 10-Ton (22,050 lb.) counterweight boxes Carbody jacking cylinders with pads, self-erect cylinder fitted to live mast assembly and synthetic lifting slings Camera System for viewing hoist drums. Shall include a camera with zoom capability at boom top and two (2) monitors in the operator�s cab for viewing. Any vendor wishing to provide a crane seemingly equivalent to the Manitowoc MLC300 Crane and accompanying parts must provide a copy of its brochure, a narrative and all other technical data required to clearly identify compliance with the requirements above no later than 11 December 2020, 3:00 PM EST, to Contract Specialist, Cynthia Oxley, U.S. Army Corps of Engineers, Huntington District, Contracting Division, via email to cynthia.a.oxley@usace.army.mil.� This is a market survey and notification of intent only. This is not a request to respond to a solicitation. A determination by the Government to compete this proposed contract based upon responses to this notice is solely within the direction of the Government.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/6cc45104b83848568a08880f7e12874e/view)
- Place of Performance
- Address: Louisville, KY 40212, USA
- Zip Code: 40212
- Country: USA
- Zip Code: 40212
- Record
- SN05866402-F 20201205/201203230149 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |