SOLICITATION NOTICE
61 -- PLATOON POWER GENERATION (PPG) - Presolicitation Notice Only
- Notice Date
- 11/12/2020 11:50:01 AM
- Notice Type
- Presolicitation
- NAICS
- 335312
— Motor and Generator Manufacturing
- Contracting Office
- ACC-ABERDEEN PROVING GROUNDS CONT C ALEXANDRIA VA 22331-0700 USA
- ZIP Code
- 22331-0700
- Solicitation Number
- W909MY-21-R-0005
- Response Due
- 12/2/2020 9:30:00 AM
- Archive Date
- 12/17/2020
- Point of Contact
- Tony D. Adams, Phone: 703740849, Danny Lester, Phone: 703-704-0818
- E-Mail Address
-
tony.d.adams10.civ@mail.mil, danny.w.lester.civ@mail.mil
(tony.d.adams10.civ@mail.mil, danny.w.lester.civ@mail.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This is a presolicitation notice only to gauge the interest of potential businesses. The U.S. Army Contracting Command-Aberdeen Proving Ground (ACC-APG) Belvoir Division, on behalf of Project Manager Expeditionary Energy & Sustainment Systems intends to award an indefinite delivery/indefinite quantity single award production contract for the PPG requirements described in the two attached documents. Description.� This action is an IDIQ 5-Year Contract with two one-year options/ordering periods.� The contract will be a single award contract for the Platoon Power Generation (PPG).� The PPG is a 28 Volt (V) Direct Current (DC) tactical quiet power generation system.� The PPG is soldier-borne, with the capability to provide no less than 900 Watts (W) of continuous power in remote environments under extreme climatic conditions.� The 900W may be generated by two sub-systems, with each providing no less than 450W. � Set-aside Status.� 100% Small Business Set-Aside. SEE DRAFT SOW AND PERFORMANCE SPECIFICATION DOCUMENT FOR MORE INFORMATION ABOUT ALL THE PPG REQUIREMENTS. Power requirements are a major contributing factor preventing small units from being able to self-sustain for extended periods without resupply.� The continued proliferation of power consuming systems at the small unit level, to include networked communication devices, has created an unsustainable burden from a logistics and Soldier load perspective.� PPG is the Platoon�s primary energy producing source for recharging during missions in austere environments where power resupply is limited or non-existent.� The PPG will enable small units the capability to operate for forty-eight (48) to seventy-two (72) hours in austere environments without the need to resupply equipment batteries.� See attached A02 PPG SOW and A02 PS 6115-0134 Revision 3, Performance Specs for further details of this requirement. The following information is applicable to this pre-solicitation notice: Action Code. Date.� 12 November Year.� 2020 Contracting Office ZIP Code.� 22160 Product or Service Code:� 61 NAICS:� 335312 Subject.� Pre-Solicitation for Platoon Power Generation (PPG) Proposed Solicitation Number.� W909MY-21-R-0005 Closing Response Date.� 1 December 2020 Contact Point or Contracting Officer.� Danny W. Lester Contract Award Number.� To be determined later. Contract Award Dollar Amount.� Estimated $62.3M Line Item Number.� Not-applicable during Pre-solicitation Phase. Contract Award Date.� Not-applicable during Pre-solicitation Phase, but award is estimated to be published on or about 28 April 2021. Contractor.� Not-applicable during Pre-solicitation Phase. Delivery schedule.� As specified above.� For individual deliver orders, it will be determined in the separate deliver orders to this IDIQ. � Duration of the contract period. As specified above.� Orders period of performance will be determined based on individual requirements. This acquisition will be solicited utilizing a Best-Value trade-off source selection process in determining the suitable contractor for the PPG effort. � The anticipated IDIQ award date.� 28 April 2021 NOTICE to Interested Parties.� All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Telephone requests for additional information will not be honored. Acknowledgement of receipt will be issued. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. � Contracting Office Address. Army Contracting Command-APG-Belvoir Division 10205 Burbeck Road Bldg 362, Suite 105 Fort Belvoir, VA United States Place of Performance:� To be determined by individual delivery orders. Primary Point of Contact: Tony D. Adams, Contract Specialist Tony.d.Adams10.civ@mail.mil Secondary Point of Contact: Danny W. Lester, Contracting Officer danny.w.lester.civ@mail.mil
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/f2ed923c62904079b97c4c2df7bb8651/view)
- Place of Performance
- Address: Springfield, VA 22160, USA
- Zip Code: 22160
- Country: USA
- Zip Code: 22160
- Record
- SN05851866-F 20201114/201112230141 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |