Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
SAMDAILY.US - ISSUE OF NOVEMBER 04, 2020 SAM #6915
AWARD

Z -- BUILDING 20325 REMODEL XP AREA @ KIRTLAND AFB

Notice Date
11/2/2020 2:41:18 PM
 
Notice Type
Award Notice
 
NAICS
238210 — Electrical Contractors and Other Wiring Installation Contractors
 
Contracting Office
W075 ENDIST ALBUQUERQUE ALBUQUERQUE NM 87109-3435 USA
 
ZIP Code
87109-3435
 
Solicitation Number
RFQW912PP20Q0071
 
Archive Date
11/17/2020
 
Point of Contact
Loretta Sanchez, Phone: 5053423210
 
E-Mail Address
loretta.d.sanchez@usace.army.mil
(loretta.d.sanchez@usace.army.mil)
 
Small Business Set-Aside
8AN 8(a) Sole Source (FAR 19.8)
 
Award Number
W912PP20P0061
 
Award Date
09/27/2020
 
Awardee
UNIFIED CONTRACTOR, INC. Albuquerque NM USA
 
Award Amount
242613.69
 
Description
This action was awarded as an 8(a) Sole Source Set Aside under the authority of section 8(a) of the Small Business Act. The contractor shall furnish all parts, material, labor, equipment and supervision necessary to complete the work for Building 20325 Remodel XP Area.� The work shall include the following requirements listed in the specific requirements.� XP (Rooms 110, 112 and 113): ����������� Room 112 and 113: Contractor shall Demo/Dispose of the existing cubicle workstations in the offices and open space. User will remove the existing file cabinets, printers and monitors from the space.� Contractor to remove and reinstall the tac boards in their original location. Contractor shall remove all existing carpet and vinyl and prep the floor. Contractor shall remove the existing rubber cove base from the work area along with the floor molding. User to circle around with KAFB fire department to assure sprinkler extension can be installed in the new suspended ceiling system. Contractor shall patch, texture and paint all interior walls. Contractor shall install new carpet tiles in the office areas. Color to be finalized by the user. Contractor shall install new rubber cove base. Color to be finalized by the user. Install new cubicle workstation (As determined by XP Staff) and reference attached furniture document. New Installation:� New cubicle furniture, equipment and accessories shall be level, square, and in proper alignment with adjoining furniture.� All drawers should operate smoothly and stay closed when not in use. All keys shall be submitted or turned over to the Campus Facility Manager. �Contractor to install a suspended ceiling with a 2x2 grid at a height of 10�to match existing drop ceiling height in adjacent rooms. Install 10 LED lights (2x2) into ceiling grid with 2 emergency lights, one at each door. Adjust heating and cooling grills along with ducting into the space. Removed exposed SIPER conduit and patch all holes left by removed conduit. Remove cork boards and white boards to paint walls. Reinstalled cork boards and white boards where AFNWC representative. New lights shall be clean and inspected before final acceptance. All emergency lights shall be tested before acceptance and remain on for 90 minutes. �� Room 110 Conference Room: User will remove store and reinstall the furniture in the conference room Contractor to remove the 4 existing floor boxes along with the power and comm which will include tracing the comm and power back to it�s source. Contractor shall remove the existing carpet and rubber cove base and prep the floor. Contractor shall remove the existing projector scree and projector mount and dispose. Contractor shall install new carpet tile and rubber cove base. Contractor shall install new door thresholds. Contractor shall remove and reinstall the existing whiteboards in their original location. Contractor shall paint the existing door frames to match the other painted brown. Contractor shall install a connect track for the power and comm to be run under the conference table. �Contractor shall Demo/Dispose of the existing cubicle workstations in the offices and open space. User will remove the existing file cabinets, printers and monitors from the space.�Contractor to remove and reinstall the tac boards in their original location.
 
Web Link
SAM.gov Permalink
(https://beta.sam.gov/opp/bf8eb18764f74626a3aad0b865969a3d/view)
 
Place of Performance
Address: Kirtland AFB, NM 87117, USA
Zip Code: 87117
Country: USA
 
Record
SN05843025-F 20201104/201102230140 (samdaily.us)
 
Source
SAM.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's SAM Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.