SOLICITATION NOTICE
20 -- Indefinite Quantity Contract (IQC) for CONTAINER, TRASH
- Notice Date
- 10/20/2020 1:03:33 PM
- Notice Type
- Presolicitation
- NAICS
- 332431
— Metal Can Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7MX-21-R-0008
- Response Due
- 12/4/2020 8:59:00 PM
- Archive Date
- 12/19/2020
- Point of Contact
- Teresa Kershaw, Phone: 6146923029
- E-Mail Address
-
teresa.kershaw@dla.mil
(teresa.kershaw@dla.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- RESPONSE DATE:� Offers/Responses are due prior to the Closing Date and Time specified in BLOCK 9 on Page 1 of the Solicitation/Request for Proposal (RFP). The solicitation will be available in DIBBS on or about its estimated issue date of November 3. 2020. DESCRIPTION: NSN(s): 2040-01-347-0949 Item Description: CONTAINER, TRASH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER) RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE USED NOR INCORPORATED IN ANY ITEMS TO BE DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR APPROVAL UNLESS THEY ARE AUTHORIZED BY THE SPECIFICATION REQUIREMENTS. MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY EXCEPTIONS TO DATA (DRAWING 03950� H2040-800-1411 REV-8): � THE WORD ""TOP"" MAY BE INK STAMPED OR EMBOSSED AND,MATERIAL � WILL BE NON-GALVANIZED SAME DIMENSIONS, .020 TO .025 MAX. UNIT OF ISSUE IS DOZEN (12 CANS). UNIT PACK SHALL BE 12 CANS. FULL AND OPEN COMPETITION APPLY CRITICAL APPLICATION ITEM IAW BASIC DRAWING NR 03950 H2040-800-1411 REVISION NR 8�� DTD 05/09/1967 PART PIECE NUMBER: REV 8 PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 QUP:001� PRES MTHD:10� CLNG/DRY:1� PRESV MAT:00 WRAP MAT:00� CUSH/DUNN MAT:HD� CUSH/DUNN THKNESS:D UNIT CONT:EE� OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 �DVDS SHALL USE A DOUBLE-WALLED CORRU- �GATED CONTAINER. STAPLE CLOSURE SHALL BE �APPLIED FOR ALL SHIPMENTS TO ENSURE MAT- �ERIAL DOES NOT BREAK FREE. NO DEVIATIONS] �UNIT OF ISSUE IS DZ (DOZEN). WHENEVER POSSIBLE AND WHEN PERMITTED BY THE TERMS OF THE CONTRACT, AVOID THE USE OF PLASTICS AS WRAPPING, CUSHIONING, OR DUNNAGE MATERIALS. ""ADDITIONAL SPECIAL MARKING REQUIREMENTS: ""CAUTION: SHARP EDGES. HANDLE WITH CARE."" MARK WITH THIS SIDE UP. Quantity (including option quantity):� ESTIMATED ANNUAL DEMAND = 6400 Ordering Unit of Issue:� Dozen Destination Information:� Various DLA stocking locations Delivery Schedule:� 75 Days All responsible sources may submit an offer/quote which shall be considered.� (X)� The Small Business size standard is 1500 employees. (X)� While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance and other evaluation factors as described in the solicitation. (X)� Various Increments Solicited: FROM:� ��TO: 400� -� 581����������������������� 582� -� 1745��������������������� 1746� -� 2909��������������������� 2910 and Up��������������� (X)� Drawings/specifications will be available through the DIBBS solicitation link in the synopsis on the solicitation issue date. (X)� The proposed procurement contains an option to extend the contract period one or more times at the discretion of the government.� The total duration (base plus option years) shall not exceed� 5 years. �(X) One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. (X) Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/d3c60c387a524d9ca524a4f18ed1109c/view)
- Record
- SN05832507-F 20201022/201020230142 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |