SOLICITATION NOTICE
20 -- USCGC PORT SHAFT SEAL REPAIR
- Notice Date
- 10/13/2020 9:42:19 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
- ZIP Code
- 94501
- Solicitation Number
- 70Z08521QP4514900
- Response Due
- 10/28/2020 8:00:00 AM
- Archive Date
- 10/28/2020
- Point of Contact
- ERIC FOSTER, Phone: 5106375977, EMILY GREENHOUSE, Phone: 5106375968
- E-Mail Address
-
Eric.T.Foster@uscg.mil, EMILY.E.GREENHOUSE@USCG.MIL
(Eric.T.Foster@uscg.mil, EMILY.E.GREENHOUSE@USCG.MIL)
- Description
- This is a combined synopsis/solicitation for commercial items/services prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. Request for Quotations number is 70Z0-8521-Q-P4514900 and is issued as a request for quotations (RFQ). This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This Request for Quotations incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-65 dated January 29, 2013. The NAICS Code is 336611. The small business size standard is 1250. This is a total small business set aside. All responsible sources may submit proposals that will be considered by the agency. The contract will be awarded on a firm-fixed-price basis using simplified acquisition procedures in accordance with FAR Part 13.5. All responses from interested vendors must be�received on/before 0800 Pacific Time, Oct 28th, 2020, and will be reviewed by the Government. �� The United States Coast Guard Surface Force Logistics Center has a requirement for the following: The CTR shall provide technical services and labor to complete replacement and repairs of the Port Shaft Seal on board CGC BERTHOLF. The port shaft seal is leaking and inoperable. Flooding could occur if repairs not accomplished. The port MX9 shaft seal requires replacement/ repair. The CTR shall provide the following: Labor Monitor shaft seal once initial dive is complete and the seal assembly is opened Provide Technical Representative qualified to perform work on Wartsila shaft seal system and installation Provide all special tools and 2 outside journeymen mechanics to support labor Attend arrival meeting to include Review of plan and requirements with Ship�s personnel Completion of OEM Checklist Certified Divers to install and remove cofferdam / shaft wrap All materials provided by divers Divers on call for safety monitoring Disassemble Shaft seals to gain access for repairs. Inspect system while disassembled If additional parts are determined to require replacement, CG will have all parts in Stern Tube Seal Kit, GFE, available for use If parts are not included in GFE kit, CTR shall submit a CFR If additional services are required, CTR shall submit a CFR Clean parts Rebuild and repair shaft seal and seat in accordance with tech manual and drawings Machine uninstalled seat to OEM specifications and return to the Coast Guard Complete reinstall with proper alignment Provide detailed service report on findings and observations Report to include list of all parts of GFE Kit used during project Report to include determination, if any, of cause for failure Coast Guard will provide the following: GFE: Stern Tube Seal, NIIN: 01-555-7573 Seat (PN: H75888-01-6 NIIN: 015759949) will be installed as new from Stern Tube Seal Kit, old Seat will be machined and returned to CG Tag Outs Engine and jacking gear for shaft seal replacement All diver tag outs as per dive checklist Remove Interferences Low Pressure Air Electrical Power Clean Work Environment Water supply for seal testing Rigging of parts and tools to the work area Operation of jacking gear to support alignment Crane Operation Description of Problem: Vessel is experiencing a port shaft seal leakage. The port shaft seal is leaking and inoperable. Flooding could occur if repairs not accomplished. The port MX9 shaft seal requires replacement/ repair. Location of work to be performed: USCGC BERTHOLF (WMSL 750) Coast Guard Island Alameda, CA 94501 US Period of Performance: Services to be performed on Primary: October 26 � 30, Secondary: November 2 � 6. USCG Estimated time 2-4 days after shaft wrap installed and fully operational (stern tube dry) Safe for work. Cutter contact will be provided to selected company. USCGC BERTHOLF is moored at above address with restricted access. Access to the cutter is gained by establishing communications with vessel point of contact above. Questions and quotes shall be emailed to Eric.T.Foster@uscg.mil and Emily.E.Greenhouse@uscg.mil Contractors are responsible for verifying receipt of quotes. INTERESTED VENDORS PLEASE SIGN AN OFFICIAL QUOTE WITH A SAM.GOV REGISTERED DUNS NUMBER AND EMAIL TO Eric.T.Foster@USCG.MIL and �Emily.E.Greenhouse@uscg.mil.�
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/c94271bdaa50418cab61ead1dc10b421/view)
- Place of Performance
- Address: Alameda, CA 94501, USA
- Zip Code: 94501
- Country: USA
- Zip Code: 94501
- Record
- SN05826007-F 20201015/201013230135 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |