SOLICITATION NOTICE
59 -- Antenna
- Notice Date
- 9/14/2020 9:02:34 AM
- Notice Type
- Presolicitation
- NAICS
- 334220
— Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing
- Contracting Office
- DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
- ZIP Code
- 43218-3990
- Solicitation Number
- SPE7MX-20-R-0124
- Response Due
- 9/29/2020 8:59:00 PM
- Archive Date
- 10/14/2020
- Point of Contact
- Robert Varcho, Phone: 6146921372
- E-Mail Address
-
robert.varcho@dla.mil
(robert.varcho@dla.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- Four (4) National Stock Number with Estimated Annual Demand Quantity (ADQ): 5985-01-124-1538 Antenna�� ADQ: 101 5985-01-124-7297 Antenna�� ADQ: �26 5985-01-124-7298 Antenna�� ADQ: �30 5985-01-134-0110 Antenna�� ADQ: �98 � Unit of Issue: EA Destination Information: Various DLA Stocking Locations NAICS Code: 334220 Radio & Television Broadcasting & Wireless Communications Equipment Manufacturing; small business size standard is 1,250 employees. � This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Dealers will be required to submit traceability documentation back to the approved source. Freight on Board (F.O.B.) will be at Origin. Inspection/Acceptance will be at Origin for NSN 5985-01-124-1538, and at Destination for the remaining three (3) NSNs. The proposed procurement will be a Long Term Contract (LTC), and will be for a total of three (3) years, to consist of one (1) base year and two (2) option years. The option years may be exercised at the discretion of the Government. � Based upon market research, the Government is using the policies contained in FAR Part 15 � Contracting by Negotiation in its solicitation for the described supplies. � This will be solicited as a Total Small Business Set-Aside. The solicitation will be available at https://www.dibbs.bsm.dla.mil/rfp/default.aspx on or about its estimated issue date of September 30, 2020. Specifications, plans or drawings are not available. � RESPONSE DATE: Offers/Responses will be due prior to the closing date and time specified in Block 8 (Offer Due Date/Local Time) on Page 1 of Standard Form 33 (Solicitation, Offer and Award). All responsible sources may submit an offer/proposal, which shall be considered. � While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, and other evaluation factors, as described in the solicitation. � One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. � Notice:� This solicitation contains DLAD Procurement Note L09 for Reverse Auction (RA). The Government reserves the right to activate this provision after timely offers have been received and evaluated. Procurement Item Description (PID), Packaging and Marking Text: - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. CLIN 0001: NSN: 5985-01-124-1538 ���� ANTENNA ���� REFERENCE NUMBER:RQ032 ���� REFERENCE NUMBER:RD002 ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ002 ���� REFERENCE NUMBER:RQ009 � ���REFERENCE NUMBER:RQ006 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:RC001 ���� REFERENCE NUMBER:ZD080 ���� REFERENCE NUMBER:CS240 ���� CRITICAL APPLICATION ITEM ���� Dayton-Granger, Inc. DBA D G 55635 P/N L10-271-1 ���� ROCKWELL INTL CORP COLLINS GENERAL 58257 P/N L10-271-1 ���� SIKORSKY AIRCRAFT CORPORATION 78286 P/N 70600-02010-103 ���� IAW REFERENCE DRAWING NR 78286 70600-02010 ���� REVISION NR V�� DTD 08/17/2005 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 78286 70600-02010 ���� REVISION NR L�� DTD 09/09/2002 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 78286 70600-02010 ���� REVISION NR K�� DTD 01/01/1989 ���� PART PIECE NUMBER: ���� IAW REFERENCE DRAWING NR 81996 70600-02010 ���� REVISION NR���� DTD 03/28/2006 � ���PART PIECE NUMBER: ���� IAW REFERENCE QAP 16236 SQAP011241538 ���� REVISION NR���� DTD 09/27/2007 ���� PART PIECE NUMBER: ���� PREP FOR DELIVERY ���� LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. CLIN 0002: NSN: 5985-01-124-7297 ����� ANTENNA ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RD002 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ011 ���� MARKING SHALL BE IAW DRAWING 70600-02017 NOTE 21. ���� REFERENCE NUMBER:E0114 ���� REFERENCE NUMBER:E0116 ���� CRITICAL APPLICATION ITEM ���� Dayton-Granger, Inc. DBA D G 55635 P/N FMH11-524 ���� SIKORSKY AIRCRAFT CORPORATION 78286 P/N 70600-02017-104 ���� PREP FOR DELIVERY ���� LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. CLIN 0003: NSN: 5985-01-124-7298 ����� ANTENNA ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RD002 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ001 ���� REFERENCE NUMBER:RQ002 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:E0114 ���� REFERENCE NUMBER:E0116 ���� REFERENCE NUMBER:ECN01 ���� REFERENCE NUMBER:EPC01 ���� REFERENCE NUMBER:EPL01 ���� CRITICAL APPLICATION ITEM ���� Dayton-Granger, Inc. DBA D G 55635 P/N UF10-269 ���� SIKORSKY AIRCRAFT CORPORATION 78286 P/N 70600-03002-104 ���� PREP FOR DELIVERY ���� LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 ���� QUP:001� PRES MTHD:AE� CLNG/DRY:1� PRESV MAT:00 ���� WRAP MAT:EA� CUSH/DUNN MAT:NA� CUSH/DUNN THKNESS:B ���� UNIT CONT:EC� OPI:M ���� INTRMDTE CONT:DO� INTRMDTE CONT QTY:AAA ���� PACK CODE:U ���� MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. ���� SPECIAL MARKING CODE:00 -00 No special marking ���� REFERENCE NUMBER:IP025 CLIN 0004: NSN:5985-01-134-0110 ����� ANTENNA ���� REFERENCE NUMBER:RP001 ���� REFERENCE NUMBER:RD002 ���� REFERENCE NUMBER:RA001 ���� REFERENCE NUMBER:RQ002 ���� REFERENCE NUMBER:RQ011 ���� REFERENCE NUMBER:ZD080 ���� REFERENCE NUMBER:E0114 ���� REFERENCE NUMBER:E0116 ���� REFERENCE NUMBER:E0165 ���� CRITICAL APPLICATION ITEM ���� Dayton-Granger, Inc. DBA D G 55635 P/N VT11-333 ���� ROCKWELL INTL CORP COLLINS GENERAL 58257 P/N VT11-333A ���� SIKORSKY AIRCRAFT CORPORATION 78286 P/N 70600-05002-101 ���� PREP FOR DELIVERY ���� LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS ���� PKGING DATA-QUP:001 ���� IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, ����� PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. ����� IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH ����� FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE ����� WITH ASTM D3951. ************************************************************************************* � GLOSSARY � ************************************************************************************* � � PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ���� All DLA Master List of Technical and Quality Requirements take ���� precedence over ASTM D3951. ���� Mark and label all packaging and packing in accordance with MIL-STD-129. ���� The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as ���� specified in the contract/purchase order. ITEM DESCRIPTION TEXT ���� REFERENCE NUMBER RQ032 ���� RQ032: EXPORT CONTROL OF TECHNICAL DATA ���� This item has technical data some or all of which is subject to ���� export-control of either the International Traffic in Arms regulations ���� (ITAR) or the Export Administration Regulations (EAR), and cannot be ���� exported without prior authorization from either the Department of State ���� or the Department of Commerce. Export includes disclosure of technical ���� data to foreign persons and nationals whether located in the United ���� States or abroad. This requirement applies equally to foreign national ���� employees and U.S. companies and their foreign subsidiaries. DFARS ���� 252.225-7048 is applicable to this data. ���� The Defense Logistics Agency (DLA) limits distribution of export-control ���� technical data to DLA contractors that have an approved US/Canada Joint ���� Certification Program (JCP) certification, have completed the ���� Introduction to Proper Handling of DOD Export-Controlled Technical Data ���� Training and the DLA Export-Controlled Technical Data Questionnaire ���� (both are available at the web address given below), and have been ���� approved by the DLA controlling authority to access the ���� export-controlled data. Instructions for obtaining access to the ���� export-controlled data can be found at: ���� https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ ���� To be eligible for award, offerors and any sources of supply proposed ���� for use are required to have an approved JCP certification and have ���� been approved by the DLA controlling authority to access ���� export-controlled data managed by DLA. DLA will not delay award in ���� order for an offeror or its supplier to apply for and receive approval ���� by the DLA controlling authority to access the export-controlled data. ���� REFERENCE NUMBER RD002 ���� RD002, COVERED DEFENSE INFORMATION APPLIES ���� REFERENCE NUMBER RP001 ���� RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT ���� REFERENCE NUMBER RA001 ���� RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS ���� (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE ���� DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB ���� AT: ���� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx ���� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE ���� SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ���� ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE ���� APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON ���� REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. ���� REFERENCE NUMBER RQ002 ���� RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL ���� REQUEST FOR VARIANCE (DEVIATION OR WAIVER) ���� REFERENCE NUMBER RQ009 ���� RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN ���� REFERENCE NUMBER RQ006 ���� RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS ���� REFERENCE NUMBER RQ011 ���� RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES ���� REFERENCE NUMBER RC001 ���� RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR) ���� REFERENCE NUMBER ZD080 ���� SAMPLING: ���� THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ ���� H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE ���� SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, ���� STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR ���� AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF ���� VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ���� ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE ���� SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER ���� MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR ���� PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT ���� SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT ���� UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. ���� REFERENCE NUMBER CS240 ���� NOTE: THIS IS A RESTRICTED SOURCE ITEM ���� MANUFACTURED TO THE OEM DRAWING(S) CITED ���� HEREIN AND AS OF THE DATE OF THIS SOLICITATION ���� ONLY THE SOURCE(S) CITED BELOW HAS/HAVE BEEN ���� PREQUALIFIED TO MANUFACTURE THE ITEM. ���� OFFERS BASED ON SUPPLYING OTHER MANUFACTURER'S ���� PARTS SHALL BE ACCOMPANIED BY TECHNICAL AND ���� OTHER DATA SUFFICIENT TO EVALUATE THE ITEM FOR ���� THE INTENDED APPLICATION AS PER DLAI 3200.1, ���� ENCL 6. SAID EVALUATION MAY TAKE AN EXTENDED ���� PERIOD OF TIME AND MAY THEREFORE BE APPLICABLE ���� TO FUTURE PROCUREMENTS. FINAL APPROVAL AUTHORITY ���� REST WITH THE GOVERNMENT DESIGN CONTROL ���� ACTIVITY. ���� REFERENCE NUMBER IP025 ���� IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS ��� �REFERENCE NUMBER E0114 ���� THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE ���� (ODS) IN THE DESIGN, MANUFACTURING, TESTING, ���� CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM ���� UNDER ANY MILITARY OR FEDERAL SPECIFICATION, ���� STANDARD OR DRAWING REFERENCED IN THIS ITEM ���� DESCRIPTION IS ""PROHIBITED"" UNLESS THE SEPARATE ��� �WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS ���� OBTAINED.� THIS PROHIBITION SUPERSEDES ALL ���� SPECIFICATION REQUIREMENTS BUT DOES NOT ���� ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS. ���� THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS ���� DEFINED IN ""FAR 11.001"" OR TO PART-NUMBERED- ���� ONLY ITEMS. ���� REFERENCE NUMBER E0116 ���� ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE ���� OFFERS IS NOT AVAILABLE AT THE PROCUREMENT ���� AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE ���� DATA PACKAGE INCLUDING DATA FOR THE APPROVED ���� AND ALTERNATE PART FOR EVALUATION. ���� REFERENCE NUMBER RQ001 ���� RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND ���� NON-MANUFACTURERS) ���� REFERENCE NUMBER ECN01 ���� CHANGE NOTICE ���� REFERENCE NUMBER EPC01 ���� SPECIFICATION CONTROL ���� REFERENCE NUMBER EPL01 ���� PARTS LIST ���� REFERENCE NUMBER E0165 ���� THE TECHNICAL DATA CITED IN THIS SOLICITATION IS ���� NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST ���� MEET THE REQUIREMENTS OF THE CITED TECHNICAL ���� DATA IN ADDITION TO THE REQUIREMENTS OF THE ���� PART NUMBERED ITEM LISTED ON THIS SOLICITATION. �
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/d72c72cdbbeb400d8d294e4492f00743/view)
- Place of Performance
- Address: USA
- Country: USA
- Country: USA
- Record
- SN05796807-F 20200916/200914230149 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |