SPECIAL NOTICE
20 -- SUPERIOR-LIDGERWOOD-MUNDY CORP (SLM) Carriage Winches, Sheaves, and Test Stand for the USCGC BERTHOLF
- Notice Date
- 8/21/2020 12:31:00 PM
- Notice Type
- Special Notice
- NAICS
- 333923
— Overhead Traveling Crane, Hoist, and Monorail System Manufacturing
- Contracting Office
- SFLC PROCUREMENT BRANCH 2(00085) ALAMEDA CA 94501 USA
- ZIP Code
- 94501
- Solicitation Number
- 70Z08520RP45C1800
- Response Due
- 8/28/2020 1:00:00 PM
- Archive Date
- 09/12/2020
- Point of Contact
- Catherine K. Chan, Phone: 5106375934, Fax: 5106375970, Wilma L. Estrada, Phone: 5106375981, Fax: 5106375970
- E-Mail Address
-
catherine.k.chan@uscg.mil, Wilma.L.Estrada@uscg.mil
(catherine.k.chan@uscg.mil, Wilma.L.Estrada@uscg.mil)
- Small Business Set-Aside
- HZC Historically Underutilized Business (HUBZone) Set-Aside (FAR 19.13)
- Description
- The United States Coast Guard (USCG) Surface Forces Logistics Center (SFLC), Long Range Enforcer Product Line (LREPL) will utilize other than full and open competition to award a contract for the purchase of one set of SLM brand Carriage Winches, Sheaves, and Test Stand for the 418' Maritime Security Cutter- Large (WMSL) USCG Cutter (USCGC), specifically the USCGC BERTHOLF. These replacement SLM Right-Hand (RH) and Left-Hand (LH) carriage winches for a WMSL USCGC, specifically for USCGC BERTHOLF, will be installed during their FQ3 FY21 dockside availability. These are OEM parts that will address the maintenance and repair need onboard the BERTHOLF to renew the mission critical boat handling system�s main components.� Superior-Lidgerwood-Mundy Corporation (SLM), located in 302 Grand Ave, Superior, WI 54880 is the OME and the only known source with the proprietary knowledge and technical data to provide these diesel engines to the Government. Therefore, the Government intends to solicit and negotiate with only the OEM under the authority of permitting other than full and open competition is 41 U.S.C. � 1901 implemented by the FAR Subpart 13.501 Simplified Procedures for Certain Commercial Items. The following are required: QUANTITY one set of (1) SLM brand Carriage Winches and Sheaves, Part Number:� RH Carriage Winch, P/N: D2-402-0020-S; LH Carriage Winch, P/N: D2-402-0020-P; LH Sheave Assembly, P/N: C2-407-0020; RH Sheave Assembly, P/N: C2-407-0020. The requirements described herein are considered the minimum necessary and are not intended to replace any procedures, controls, examinations, or tests normally employed by the Contractor to assure the quality of the product. The Contractor shall provide all equipment, labor and materials to manufacture, test, inspect, preserve, package, pack and mark the part provided within this contract requirement.� The SLM Corporation Carriage Winch Assembly listed above shall be in accordance with the OEM specifications, drawing(s) and data.� The contractor shall use any propriety OEM specifications, drawings and data used to manufacture the OEM parts to the strict tolerances, measurements, and exactness to the original parts and their performances.� Since much of the technical information is propriety, the Contractor would require all the necessary information to replicate OEM standards; therefore it is critical that the OEM is the manufacture of the parts sold in this requirement.� All parts shall be 100% new OEM parts.� Reclaimed, recycled, or aftermarket parts are not acceptable and shall not be used.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/f99d40d1b7f44191af5e52e2abe184f7/view)
- Place of Performance
- Address: Alameda, CA 94501, USA
- Zip Code: 94501
- Country: USA
- Zip Code: 94501
- Record
- SN05768752-F 20200823/200821230201 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |